高压超高压变泥质岩适用的地质温压计评述

高压超高压变泥质岩形成温压条件及p-T演化轨迹是高压超高压变质作用研究的重要内容。本文介绍了高压超高压变泥质岩适用的几种地质温压计,包括石榴子石-多硅白云母Fe~(2+)-Mg交换温度计、石榴子石-绿泥石Fe~(2+)-Mg交换温度计、硬绿泥石-绿泥石Fe~(2+)-Mg交换温度计、多硅白云母Si含量压力计、金红石Zr含量温度计、榍石Zr含量温压计、锆石Ti含量温度计、石英Ti含量温度计以及氧同位素温度计,并对上述温压计的适用条件及使用时的注意事项做了简要评述。     

贵州松桃高地特大型富锰矿床主要地质特征

位于贵州铜仁松桃国家锰矿整装勘查区内的高地富锰矿床,(332)+(333)类碳酸锰富锰矿石资源量达7 166. 84万吨,锰平均品位25. 75%,矿体平均厚度4. 52 m,富锰矿体赋存于总资源量达1. 61亿吨的高地超大型锰矿床之中,由一个单一的富锰矿体构成,是我国新发现的首个特大型富锰矿床,富锰矿资源量相当于我国富锰矿资源量总和的2倍。成因类型属古天然气渗漏沉积型锰矿床,富锰矿产于古天然气渗漏沉积成矿系统中心相区。高地富锰矿床地处独特的"新月形"南华纪早期李家湾-高地-道坨(Ⅳ级)地堑盆地中心,菱锰矿体中均出现以块状构造夹被沥青充填的气泡状富菱锰矿石。地表燕山期北北东向的断裂构造十分发育,但主要为上陡下缓犁式正断层,未触及高地深部隐伏巨型锰矿体,以致富锰矿体保存亦十分完整,易于开发利用。     

A nonstationary parameter model for the sandstone creep tests

The rock masses of hydro-fluctuation belt experience seepage pressure following impoundment in the Three Gorges Reservoir; its creep behaviors are significant for reservoir bank slopes. To study the creep behaviors under seepage pressure (0, 1.45, and 1.75 MPa), we performed creep tests using representative landslide sandstone in the Three Gorges Reservoir and investigated the sandstone creep behaviors under the coupling effects of seepage pressure and stress. Previous researches on rocks have usually regarded the creep constitutive parameter as a constant; however, in this study, a nonlinear, nonstationary, plastic-viscous (NNPV) creep model which can describe the curve of sandstone creep tests is proposed. The rock-creep parameters under three levels of seepage pressure were identified, and theoretical curves using the NNPV model agreed well with the experimental data, indicating that the new model cannot only describe the primary creep and secondary creep stages under varying seepage pressures but also, in particular, perfectly describes the tertiary creep stage. Finally, the sensitivity of the NNPV model parameters is analyzed, and the result shows that the nonstationary coefficient α and the nonlinear coefficient m are main parameters affecting the tertiary creep stage.     

Acquiring high-resolution topography and performing spatial analysis of loess landslides by using low-cost UAVs

The Loess Plateau is a region in China prone to frequent geological disasters, where thousands of loess landslides can be found. Conventional field survey methods are inadequate for the requirements of fine spatial analysis of landslides. Due to its numerous advantages (fast, efficient, low cost, safe, and able to acquire high-resolution data), structure from motion (SfM) technique to photogrammetric orientation of flights and modeling applied to photographs taken by unmanned aerial vehicles (UAVs) equipped with a camera has become a powerful new tool for the generation of high-resolution topography that has emerged in recent years, which has become a powerful new technique for acquiring high-resolution topographic data. In this study, we conducted nearly two months of field UAV surveys of loess landslides on the Loess Plateau, eventually established 3D digital models for 11 loess landslides, and produced high-resolution digital orthophoto maps (DOMs) and digital elevation models (DEMs). High-resolution spatial analysis of the loess landslides (mainly including characteristic parameter extraction, topography profile analysis, surface feature analysis, and hydrologic analysis) was performed using Agisoft PhotoScan, ArcGIS 10.2, Global Mapper 17, and Origin Pro 9.0. The UAV technique allows us to further understand the micro-level internal spatial and structural characteristics of loess landslides. Moreover, not only does it allow us to accurately measure the characteristic geometric parameters but also enables us to detect the surface details of loess landslides (e.g., textures, fissures, and micro-landforms). Manifestly, we can also deduce the original structural characteristics and possible inducement mechanism of landslides based on a combination of high-resolution data acquired by UAVs, proper ground surveys, and theoretical knowledge. In summary, the low-cost UAVs are highly and especially suitable for surveys and digital terrain analysis of landslides on the Loess Plateau with sparse vegetation.     

Extreme deformation characteristics and countermeasures for a tunnel in difficult grounds in southern Shaanxi,China

The Qingling–Bashan (QB) mountain region in southern Shaanxi mainly consists of strongly compressive zones from east to west, with tight folds and compressive fractures. There is a wide distribution of soft rocks of various types, such as phyllite and slate, accompanied by complex geological structures. Ironically, tunnel construction in these difficult grounds with complicated geological conditions embraces a high risk of extreme deformation due to various unpredictable reasons, which can frequently cause collapse and result in budget overruns during the construction period. Therefore, it is crucial to conduct effective countermeasures to eliminate or avoid such adverse impacts. This paper provides a case study on the “Yingfeng tunnel” (a tunnel constructed in soft rock consisting of a slate ground) based on a geological survey, indoor experiments and in situ monitoring. A successive rock mass deformation resulted in the tunnel lining seriously intruding into construction clearance and some other sections, even collapsing during the construction. The maximum displacement amount was 62.5 cm, while the maximum deformation speed reached as high as 34.18 mm/day. Additionally, to evaluate the construction impacts of tunnelling-induced geo-hazards, an investigation on extreme deformation was conducted. Considering the time-dependent features of the rock mass deformation, the constraint-convergence method was used to put forward applicable countermeasures in this paper. Finally, from the feedbacks of monitoring results, extreme deformation of the Yingfeng tunnel was effectively controlled.     

利用电子探针研究甘肃陇南赵家庄金矿载金矿物特征

应用偏光显微镜与电子探针相结合的手段是研究载金矿物的主要方法。本文采用镜下鉴定和电子探针分析技术,对赵家庄金矿中载金矿物含量、形态特征及其与其他矿物的空间关系开展研究,并对载金矿物进行定性和定量分析,探寻具有找矿意义的载金矿物和总结标志矿物特征。结果表明:研究区金矿石中主要载金矿物为黄铁矿,少量为黄铜矿、闪锌矿,这些载金矿物中Au含量依次为:细晶黄铁矿粗晶黄铁矿草莓状黄铁矿黄铜矿。不同时期的黄铁矿(粗晶黄铁矿、细晶黄铁矿、草莓状黄铁矿)中Au的分布均匀,但存在差异性,主要表现为细晶黄铁矿和草莓状黄铁矿中的Au含量较高(平均含量0. 14%～0. 18%),这种现象表明此类矿物为构造热液期形成,金易富集。Au以两种形式存在,一种是"可见金"包裹于脉石矿物中,或以裂隙金的形式嵌布在矿物晶隙及裂隙中;另一种是"不可见金"以纳米级颗粒金的形式存在于载金矿物中,也是Au的主要存在形式。本研究为后期矿床的成因、成矿过程和成矿机理研究提供了佐证,同时易于根据含金矿物的特征选择合适的选冶方法。     

Os水吸收液ICP-MS测量信号强度衰减原因研究

蒸馏法能从样品中有效分离出OsO_4,吸收液直接用于ICP-MS测定,是辉钼矿Re-Os定年的关键技术环节。但实验发现,长时间放置的吸收液中Os信号强度显著降低。根据OsO_4化学性质推测原因在于一是挥发使吸收液Os含量减少,二是还原使+8价Os变成低价态,气态比例降低,若雾化效率不变,进入质谱仪的Os减少,两者都会导致信号降低,但具体影响情况不明,需深入研究。本文利用辉钼矿标准物质制备不同放置时间、酸度和温度的吸收液,对比上述条件对ICP-MS信号强度的影响。实验时将残余吸收液与稀释剂、氧化剂封入Carius管加热蒸馏,测定Os含量。结果表明:吸收液放置时间越长,酸度越低,温度越高,信号降幅越大,幅度达到3.2%~68.6%。室温下放置相同时间,低酸度吸收液的Os保存率高于高酸度吸收液,但Os信号强度低于后者,证明了挥发和还原共同导致信号衰减,且还原是主导原因。本文提出,冷冻(-18℃)可抑制OsO_4挥发,提高酸度(约3.5 mol/L)可减弱OsO_4还原,两者结合抑制信号衰减,提高了蒸馏法的灵活性和适用性。     

混积岩分类命名体系探讨及对混积岩储层评价的启示——以渤海海域混积岩研究为例

混积岩是一种普遍而重要的岩石组合类型。然而长期以来,对混积岩的岩石学分类与命名一直存在诸多争议,且尚未有统一的分类体系与命名规则。本文结合渤海海域混积岩岩石薄片组分鉴定、岩石储层物性分析等最新研究成果,并与相关文献结合,最终确立以陆源碎屑物、生物成因碳酸盐颗粒、化学沉淀碳酸盐为三组分端元的一套新的混积岩岩性分类体系,并将混积岩分为4大类、16亚类。通过讨论混积岩混积层系及混积岩组构界定的问题,进一步完善了混积岩定义。利用新的岩石学分类方案,可为储层评价研究提供指导。以渤海海域为例,建立起研究区不同岩性相与储层物性的对应关系,并在岩性分类体系中划分出差储层、中等储层及优质储层三个储层区。     

1965-2015年新疆夏季不同等级降水的空间分布特征

根据新疆51个台站1965-2015年夏季逐日降水资料,将降水划分为小雨、中雨及大雨3个等级,分析了新疆近51 a夏季不同等级降水量、降水日数及降水强度的空间分布特征,并讨论了各等级降水日、降水量及降水强度与总降水量的空间相似程度以及各等级降水对夏季总降水的贡献。结果表明：新疆降水主要集中在夏季,并以小雨为主。以天山山脉为界,南北两疆降水空间分布存在明显差异,北疆夏季降水量（日）占年降水量（日）的36%~45%（36%~39%）,南疆夏季降水量（日）占年降水量（日）的51%~63%（48%~60%）;新疆夏季不同等级降水量、降水日及降水强度的空间分布不均匀。新疆夏季总降水量与各等级降水量的空间相似系数最为密切,与各等级降水强度的空间相似系数相对较小;新疆夏季小雨贡献率最大,中雨其次,大雨最小,夏季降水量和降水日的变化主要受小雨的影响。     

铺前—清澜断裂西支晚更新世活动特征

海域浅层地震探测调查表明,铺前—清澜断裂向北西海域方向延伸,断裂走向NW-SE,倾向SW,为高倾角的正断层;在地震剖面上,断裂断错了第四系地层;进一步应用钻探技术对铺前—清澜断裂进行探测研究,结合层序地层学、岩性岩相分析与年代测定等方法建立了钻孔联合剖面,揭示断层性质为正断层,倾向SW,断距4.0 m,断层的最新活动时代为晚更新世,第四纪表现为张性活动,断裂的平均垂直速率为0.15 mm/a。