Small-scale electrical resistivity tomography of wet fractured rocks

This paper describes a series of experiments that tested the ability of the electrical resistivity tomography (ERT) method to locate correctly wet and dry fractures in a meso-scale model. The goal was to develop a method of monitoring the flow of water through a fractured rock matrix. The model was a four by six array of limestone blocks equipped with 28 stainless steel electrodes. Dry fractures were created by placing pieces of vinyl between one or more blocks. Wet fractures were created by injecting tap water into a joint between blocks. In electrical terms, the dry fractures are resistive and the wet fractures are conductive. The quantities measured by the ERT system are current and voltage around the outside edge of the model. The raw ERT data were translated to resistivity values inside the model using a three-dimensional Occam's inversion routine. This routine was one of the key components of ERT being tested. The model presented several challenges. First, the resistivity of both the blocks and the joints was highly variable. Second, the resistive targets introduced extreme changes the software could not precisely quantify. Third, the abrupt changes inherent in a fracture system were contrary to the smoothly varying changes expected by the Occam's inversion routine. Fourth, the response of the conductive fractures was small compared to the background variability. In general, ERT was able to locate correctly resistive fractures. Problems occurred, however, when the resistive fracture was near the edges of the model or when multiple fractures were close together. In particular, ERT tended to position the fracture closer to the model center than its true location. Conductive fractures yielded much smaller responses than the resistive case. A difference-inversion method was able to correctly locate these targets.     

Effects of rate-limited mass transfer on water sampling with partially penetrating wells

Nonequilibrium concentration type curves are numerically developed and sensitivity analyses are performed to examine the relationships between effluent concentrations in partially penetrating monitoring/extraction wells, the vertical plume shape, and the mass transfer characteristics of the aquifer. The governing two-dimensional, axisymmetric nonequilibrium solute transport equation is solved in three stages using an operator-splitting approach. In the first two stages, the advection and dispersion terms are solved with the Eulerian-Lagrangian method, based on the backward method of characteristics for advection and the standard implicit Galerkin finite element method for dispersion. In the third step, the first-order, immobile-mobile domain mass transfer term is computed analytically for both two-site and lognormally distributed, multirate models. Effluent concentration variations with time and contour plots of the pore water concentration distribution in the aquifer are compared for a wide range of field- and laboratory-measured mass transfer rates, various plume shapes, and relevant physical/chemical parameter values, including pumping rate, vertical anisotropy ratio, retardation factor, and porosity. The simulation results show that rate-limited mass transfer can have a significant impact on sample and aquifer pore water concentrations during three-dimensional transport to a partially penetrating well. An alternative dimensionless form of the nonequilibrium solute transport equation is derived to illustrate the key parameter groupings that quantify rate-limited sorption effects and show the relative importance of individual parameters. A hypothetical field application example demonstrates the fitting of dimensional type curves to discrete-interval sampling data in order to evaluate the mass transfer characteristics of an aquifer and shows how type curve superposition can be used to model complex plume shapes.     

Palaeoecology, reference conditions and classification of ecological status: the EU Water Framework Directive in practice

The European Union's Water Framework Directive (WFD) requires that all Member States within the European Union determine reference conditions for aquatic ecosystems to provide a baseline against which to measure the effects of past and present activities. Reference conditions are subsequently used to classify the ecological status of European waters. The decisions regarding environmental status will be important future elements in the management of European coastal waters. We have developed a number of classification scenarios for total nitrogen (TN) in the overlying waters of the southern part of Roskilde Fjord, Denmark, taking as our basis a palaeoecological reconstruction of fluctuations in TN between 1850 and 1995. We present a provisional classification scheme for the ecological status of Roskilde Fjord, sensu the WFD. Decision(s) regarding the deviation from reference conditions will give a wide range of apparent ecological status from good, through moderate and poor, to bad depending upon the definition of an acceptable deviation from reference conditions. The determination of an acceptable deviation will ultimately be a political decision, and will result in a wide range in the protection of coastal waters in Europe. There is still, however, an urgent need for a sound scientific documentation of the various scenarios for the implementation of the WFD.     

Does sedimentary organic delta 13C record variations in quaternary ocean [CO2(aq)]?

Ocean surface water [CO2(aq)] variations based on glacial/interglacial changes in sediment delta 13Corg are shown to compare favorably with reconstructions based on ice core [CO2]. In particular, an approximate 80 microatmospheres increase in atmospheric pCO2 during the last glacial-interglacial transition is calculated to correspond to a 3-4 micromolar increase in ocean surface water [CO2(aq)] at atmospheric equilibrium. A widespread marine delta 13Corg decrease of 1-2% accompanied this event and was not preceded by an equivalent isotopic change in surface water total dissolved inorganic carbon. These observations support the hypothesis that [CO2(aq)] influences photosynthetic isotope fractionation between marine inorganic and organic carbon pools, and therefore that plankton/sediment delta 13Corg may serve as a proxy for surface water [CO2(aq)].     

Hepatic metallothionein as a biomaker for metal contamination: age effects and seasonal variation in European flounders (Pleuronectes flesus) from the Severn Estuary and Bristol Channel

Hepatic concentrations of metallothionein [MT] and three metals (Cu, Zn, Cd) were determined in 242 European flounders (Pleuronectes flesus) collected from power stations at Oldbury-upon-Severn and Hinkley Point, located in Severn Estuary and Bristol Channel, UK, respectively, between March 1996 and February 1998. A model involving three-factor analysis of variance (ANOVA) was used to examine variation in MT and metal concentrations with respect to season, year and site; with age-class included as a covariate in the analysis. Hepatic concentrations of MT and Cd (and to some degree, Cu, but not Zn) increased significantly with age. The model explained 38, 25, 17 and 26% of the variation in MT, Cu, Zn and Cd, respectively, with significant effects due to season, and to a lesser extent, to year. Site was only a significant factor for Cd which was higher in fish from Hinkley. Correlation between the individual concentration of MT and each metal alone, or in combination, was poor, and explained only an additional 3.0% of the residual variation in MT, most of which was attributable to Cu (2.7%). Compared to other industrialised estuaries, Cd concentrations were high (>20 micro g-1 in some individuals). The study emphasises the importance of seasonal variation and other factors in biomonitoring programmes and highlights the limitations of using [MT] as a biomarker for metal contamination in flounders from the Severn Estuary.     

深海锤击取样管

深海锤击取样管Ｄ·Ｊ·Ｓｍｉｔｈ，Ｋ·Ｔｒｏｎｓｔａｄ１前言锤击取样管在海洋沉积取岩芯中是一种新的设计原理，能在大陆边缘、斜坡以及深海平原沉积区钻取沉积芯样，以满足考古海洋学的要求。取样管可在水深５０００ｍ处获得长达３０ｍ的未扰动岩芯。它使用了类似陆...     

Whiting events: biogenic origin due to the photosynthetic activity of cyanobacterial picoplankton

An annual whiting event occurs each year in late May to early June in Fayetteville Green Lake, New York. The initiation of this event correlates with exponential growth of the Synechococcus population within the lake. Synechococcus is the dominant (by approximately 4 orders of magnitude) autotrophic organism owing to the oligotrophic condition of the lake. The delta 13C values of the dissolved inorganic C range seasonally from -9.5% in winter to -6.2% in summer due to photosynthetic activity. Calcite precipitates principally in the microenvironment surrounding Synechococcus because of a photosynthetically driven alkalization process and the availability of the cells as nucleation sites. This calcite has a heavier delta 13C value (>4%) than does the dissolved inorganic C of the lake water owing to the cells' preferential uptake of 12C. A conceptual model suggests that photosynthetic activity and cell surface chemistry, together with the substantial surface area that arises from the great abundance of micron-sized cells, allow Synechococcus to dominate the annual whiting events in Fayetteville Green Lake.     

蒙古国东部巴彦东铅锌矿地质特征及找矿方向

位于蒙古国东部的巴彦东铅锌矿,区域上处于南克鲁伦成矿带内,有著名的有色金属矿山与之相毗邻。在现有的资源量估算边界外侧,矿体还未圈闭。在该矿区周围及深部仍然有较大的找矿空间。矿体主要受细粒黑云母花岗岩及其外侧的矽卡岩控制,NW向张性断层对矿体的就位亦有重要的控制作用,岩性与构造是该矿床形成的联合控制因素。同时矿体位于布格重力异常区以及正、负磁异常的急剧梯度带内。下步找矿工作重点应当在深部投入必要的钻探工作,同时应注意研究外围的矽卡岩分布区物、化探异常特征。     

Effect of wharves on intertidal assemblages on seawalls in Sydney Harbour, Australia

Worldwide, urbanisation has resulted in extensive replacement of natural habitats with man-made habitats. In Sydney Harbour, Australia, approximately half of the natural foreshore has been replaced by seawalls. Many of these have wharves built over part of their length, which could affect intertidal assemblages on seawalls beneath the wharves. This was tested by sampling and comparing assemblages under and not under wharves in Sydney Harbour. Assemblages differed between the two habitats, with greater cover of macro-algae and abundance of grazing molluscs on seawalls without a wharf and, to a lesser extent, greater cover of sessile invertebrates on seawalls under a wharf. There was, however, considerable spatial variability among locations in composition of assemblages and the species dominating differences between the two habitats. The impact of multiple artificial structures in close proximity and the variability among apparently homogeneous artificial habitats must be considered for the management of urbanised estuaries.     

Quantity, distribution, and impacts of coastal driftwood triggered by a typhoon

Typhoon Morakot pounded Taiwan in 2009 with record-breaking rainfall, washing an unprecedented amount of driftwood into the sea that was partially deposited at the coastal areas. According to the satellite imagery analysis, more than three million trees fell and were washed away to occupy 83.2% of the Taiwanese coastline, including 52 fishing harbors. The amount cleaned-up was only 1/7 of the total coastal driftwood. It was found that the amount of coastal driftwood is not only related to the amount of precipitation but is also related to the distance from the location of the landslide to the river mouth and to the landslide area. The amount of accumulated coastal driftwood demonstrated log-profile declines with increasing distance to the river mouth. Nearshore current and wave motion are the critical factors for driftwood deposition. Much of the driftwood washed into the sea harmed the tourism and fishing industries, endangered navigation and oceanic activities, and impacted the marine environment and ecosystem.