3-D upper crustal tomographic structure across the Vrancea seismic zone, Romania

The VRANCEA99 and VRANCEA2001 seismic refraction experiments are part of a multidisciplinary project to study the Eastern Carpathians in Romania. The objectives of these studies are intended to disclose a more detailed picture of the crustal and upper mantle structures above the seismically active Vrancea region. In this paper we provide additional constraints for the upper crustal structures of the area. The 1999 campaign consisted of a 320-km-long N–S profile and a 70-km-long E–W profile. The intersecting 2001 profile extended in E–W direction from the Hungarian border to the Black Sea. In order to enhance the model resolution, first arrival data from local crustal earthquakes were also included.This configuration allowed for the first time to derive a 3-D velocity model for the upper crust of the Romanian Carpathian Orogen, within a 115×235 km wide region, centred over the Vrancea seismic zone. The 3-D model reveals lateral velocity variations, which were not visible on the in-line interpretations. It allows us to distinguish between foreland platform areas, foreland basins and the Carpathian Orogen. Clear velocity differences between the foreland basins south and southeast of the Eastern Carpathians and the Focsani Basin further north indicate different pre-Miocene sedimentary compositions and geological evolutions of these foreland platforms. The involved Moesian and Scythian platforms are separated by the Trotus Fault system, which is observed as a velocity discontinuity. An upper crustal high-velocity zone, above the northern Vrancea seismic zone, could also be identified. This high-velocity zone is explained by a Middle Pliocene to Pleistocene E–W oriented out-of-sequence thrust of the crystalline basement, below the decollement of the flysch nappes.     

Structure of the crust and uppermost mantle beneath southern Finland revealed by analysis of local events registered by the SVEKALAPKO seismic array

In 1998–1999, a large-scale seismic array was deployed in Finland as a part of the EUROPROBE/SVEKALAPKO subproject, involving 14 European universities and research institutes. The objective of the project was to map the deep lithosphere structure and thickness beneath the Fennoscandian Shield by means of teleseismic events. In addition, about 580 local seismic events were registered during the data acquisition period. Among them, only eight local earthquakes were recorded, the rest being quarry blasts from mining sites in Russia, Finland, Estonia and Sweden. In this study, we present the analysis of the seismic wave field from the strongest local events registered by the majority of the stations of the SVEcofennian–KArelian–LAPland–KOla Transect (SVEKALAPKO) array with the aim of mapping the structure of the upper mantle beneath the array. For this purpose, we selected the events corresponding to a single source type and compared these recordings with those from wide-angle reflection and refraction experiments in the area to identify the regional phases. The record sections of selected events demonstrate strong reflections (PmP) from the Moho boundary. The refracted Pn phases can be seen as first arrivals at distances of about 200–400 km from the source. At offsets of about 400–800 km, phases reflected from inhomogeneities in the uppermost mantle (P1) and double reflections from the Moho boundary (PmPPmP) were recorded.Results from 2D forward ray trace modeling of reflected and refracted P-waves along four profile swathes from SVEKALAPKO stations demonstrate that the mantle reflections originate from two different groups of boundaries beneath the array: one group of phases arrive from subhorizontal and gently dipping reflectors below the Moho boundary at a depth of 70–90 km, while the other group are phases originating from a depth of 100 to 130 km. Based on the irregular character of the first group of reflections, their different spatial orientation and correlation with the Moho offsets, we interpret the boundaries of this group as relicts of ancient subduction and collision processes. The second group of reflections can be explained by a transition from mechanically strong to mechanically weak lithosphere.     

岩石破裂过程中电阻率变化机理的探讨

受压岩石在破裂过程中,视电阻率会出现明显的变化,其异常形态与实验条件有很大的关系. 实验中对磁铁石英岩样品施加了单轴压缩,岩石的破裂经反复加载和卸载实现,并在岩样的裂隙中注入了食盐溶液. 在实验的各阶段,对样品的主剖面重建出一系列内部真电阻率分布的图像,揭示了介质内的微细结构,从而探讨了视电阻率变化的原因. 实验发现,岩石中裂隙的存在及所含液体的饱和状态,是岩石在主破裂前控制电阻率变化的两个最重要的因素;低应力状态属常态导电过程,孔隙度的变化是主要因素;高应力状态属裂隙表面导电机制,随着破裂面在岩体内部出现,水和孔隙有了完全贯通的平面,多种导电机制都得以发挥作用. 此外,体导电结构的变化在宏观上表现为各向异性和图样有序性的增强.     

Upper crustal seismic structure of the Mazury complex and Mazowsze massif within East European Craton in NE Poland

The large-scale seismic experiment POLONAISE '97 (POlish Lithospheric ONsets—An International Seismic Experiment) was carried out in May 1997 in Poland, Lithuania, and Germany. Its main purpose was to investigate the structure of the crust and the uppermost mantle in the region of the Trans European Suture Zone (TESZ) that lies between the East European Craton (EEC) and the Palaeozoic Platform. This paper covers the interpretation of seismic data along the NW–SE-trending, 180-km-long profile P5 located on the EEC. The recordings were of a high quality with seismic energy clearly visible along the whole profile. We have not found waves refracted below the upper crust in first arrivals. In the NW part of the profile, we have delineated a high-velocity body with the P-wave velocity in the range of 6.5–6.75 km/s in the upper crust. It corresponds to the K trzyn anorthosite massif within the Mazury complex. The Mazowsze massif is rather uniformly characterized by P-wave velocities 5.9–6.05 and 6.2–6.35 km/s in two layers, respectively. Sufficient S-wave data were available to estimate the V_p/V_s ratio (as well as the Poisson ratio), being 1.80 (0.277) in the high-velocity body and 1.67 (0.220) in the upper crust.Apart from the 2-D model along the profile, results of 3-D modelling in the area of the P5 profile are presented. Using off-line recordings, we got P-wave velocity field up to 8 km/s below the P5 profile at the depth of about 40 km as well as horizontal extent of the high-velocity body.     

Summary of project TOR: delineation of a stepwise, sharp, deep lithosphere transition across Germany–Denmark–Sweden

Project Tor (Teleseismic Tomography across the Tornquist Zone in Germany–Denmark–Sweden) is now producing results. We are able to detect very significant deep lithosphere differences, and we can now discuss the sharpness laterally. In 1996–1997, our 120 seismographs constituted the largest seismic antenna ever in Europe. The Tor area was chosen along a well-studied crustal profile of an earlier project, and the inversion efforts are concentrated on the deep lithosphere and asthenosphere differences to depths around 300 km. The Tor investigation can be called two-and-a-half-dimensional, as it has a 900-km profile length with 100 km width plus a few seismographs off the profile. The Tor data have been subjected to P-wave travel time tomography, surface wave and receiver function analysis as well as anisotropy and scattering measurements. Through ray tracing in a compiled crustal model and subtraction of the modelled travel time anomalies, the influence of the lower lithosphere/asthenosphere on the seismic rays from distant earthquakes is being established. Travel time tomography results confirm very large lateral lithosphere differences of 4–6% in P-wave velocity. For several events of the large data base, it is demonstrated that the observed P-wave travel time anomalies of 1–2 s can be divided almost equally between known crustal effects and lower lithosphere/asthenosphere differences, which then must account for about 1 s of the travel time differences. The transition is interpreted to be sharp and steep in two places. It goes all the way through the lithosphere at the northern rim of the Tornquist Zone near the border between Sweden and Denmark, and here the lithosphere difference is large. A smaller lithosphere difference is found near the southern edge of the Ringkøbing-Fyn High just north of the border between Denmark and Germany. Also, this transition is sharp and steep, and goes all through the lithosphere. These two sharp transitions divide the Tor region into three different lithosphere structures distinguishable in P-wave travel time tomography, surface wave dispersion, P- and S-wave anisotropy, and partly in P-wave scattering.     

Moho topography and lower crustal wide-angle reflectivity around the TESZ in southern Scandinavia and northeastern Europe

The Moho topography is strongly undulating in southern Scandinavia and northeastern Europe. A map of the depth to Moho shows similarities between the areas of the Teisseyre–Tornquist Zone (TTZ) in Poland and the Fennoscandian Border Zone (FBZ), which is partly coinciding with the Sorgenfrei–Tornquist Zone (STZ) in Denmark. The Moho is steeply dipping at these zones from a crustal thickness of approximately 32 km in the young Palaeozoic Platform and basin areas to approximately 45 km in the old Precambrian Platform and Baltic Shield. The Moho reflectivity (P_MP waveform) in the POLONAISE'97 refraction/wide-angle seismic data from Poland and Lithuania is variable, ranging from ‘sharp’ to strongly reverberating signals of up to 2 s duration. There is little or no lower crustal wide-angle reflectivity in the thick Precambrian Platform, whereas lower crustal reflectivity in the thin Palaeozoic Platform is strongly reverberating, suggesting that the reflective lower crust and upper mantle is a young phenomena. From stochastic reflectivity modelling, we conclude that alternating high- and low-velocity layers with average thicknesses of 50–300 m and P-wave velocity variations of ±3–4% of the background velocity can explain the lower crustal reflectivity. Sedimentary layering affects the reflectivity of deeper layers significantly and must be considered in reflectivity studies, although the reverberations from the deeper crust cannot be explained by the sedimentary layering only. The reflective lower crust and upper mantle may correspond to a zone that has been intruded by mafic melts from the mantle during crustal extension and volcanism.     

Three-dimensional seismic modelling of crustal structure in the TESZ region based on POLONAISE''97 data

This paper reports the results of 3-D tomographic modelling of crustal structure in the Trans European Suture Zone region (TESZ) of Poland, eastern Germany and Lithuania. The data are the product of a large-scale seismic experiment POLONAISE'97, which was carried out in 1997. This experiment was designed to provide some 3-D coverage. The TESZ forms the boundary between the Precambrian crustal terranes of the East European Craton (EEC) and the younger Phanerozoic terranes to the southwest. The 3-D results generally confirm the earth models derived by earlier 2-D analyses, but also add some important details as well as a 3-D perspective on the structure. The velocity model obtained shows substantial horizontal variations of crustal structure across the study area. Seismic modelling shows low (<6.1 km/s) velocities suggesting the presence of sedimentary rocks down to a depth of about 20 km in the Polish basin. The shape of the basin in the vicinity of the profile P4 shows significant asymmetry. Three-dimensional modelling also allowed tracing of horizontal irregularities of the basin shape as well as variations of the Moho depth not only along profiles, but also between them. The slice between P2 and P4 profiles shows about 10-km variations of the Moho over a 100-km interval. The crustal thickness varies from about 30 km in SW, beneath the Palaeozoic platform, to about 42 km beneath East European Craton in NE. High seismic velocities of about 6.6 km/s were found in the depth range 2–10 km, which coincides with K trzyn anorthosite massif. The results of this 3-D seismic modelling of the POLONAISE'97 data will ultimately be supplemented by inversion of seismic data from previous experiments.     

Water Resource Development in the Quaternary Ryukyu Limestone Regions of Japan:Application of the GIS to the Site Selection of Underground Dams

Based on the natural and social conditions as well as hydrogeological characteristics of the Ryukyu limestone, a major aquifer in the Ryukyu Islands, a conception of underground dam, was proposed in the early 1970s in order to develop ground water resources in the Quaternary Ryukyu limestone regions of Japan. The practice of nearly thirty years has shown that the underground dam is an environment-friendly and effective way for developing ground water in these regions.To further improve the technology associated with underground dam, the authors introduced related analytic methods. The application of the geographical information system technology to site selection of the underground dam is reported in this paper.