Properties of unstable waves in the lower St Lawrence Estuary

Abstract

The lower St Lawrence Estuary is an interesting case amongst estuaries in that it is wide enough to accommodate the development of mesoscale unstable waves and eddies. These features are generated by the runoff‐driven jet along this body's south shore. We present data yielding estimates of the length, time and velocity scales of these unstable disturbances. To relate these quantities to the dynamics we employ a 2‐layer quasigeos‐trophic instability model featuring realistic lateral shear. All model runs show short time and length scales, e‐folding periods of less than 10 days and wavelengths less than 50 km.     

Production and pelagic dissolution of biogenic silica in the Southern Ocean

Vertical distributions of particulate silica, and of production and dissolution rates of biogenic silica, were determined on two N-S transects across the Pacific sector of the Antarctic Circumpolar Current during the austral spring of 1978. Particulate silica profiles showed elevated levels in surface water and near the bottom, with low (35–110 nmol Si · 1^?1) and vertically uniform values through the intervening water column. Both the particulate silica content of the upper 200 m and the production rate of biogenic silica in the photic zone increased from north to south, reaching their highest values near the edge of the receding pack ice. A significant, but variable, fraction (18–58%) of the biogenic silica produced in the surface layer was redissolving in the upper 90–98 m. Net production of biogenic silica in the surface layer (production minus dissolution) was proceeding at a mean rate of ca. 2 mmol Si · m^?2 · day^?1. This is ca. 4 times greater than the most recent estimate of the mean accumulation rate of siliceous sediments beneath the ACC. We estimate, based on mass balance, that the mean dissolution rate of biogenic silica in subsurface water column in the Southern Ocean is 1.2–2.9 mmol Si · m^?2 · day^?1.     

Forecasting ocean wave energy: The ECMWF wave model and time series methods

Recently, the technology has been developed to make wave farms commercially viable. Since electricity is perishable, utilities will be interested in forecasting ocean wave energy. The horizons involved in short-term management of power grids range from as little as a few hours to as long as several days. In selecting a method, the forecaster has a choice between physics-based models and statistical techniques. A further idea is to combine both types of models. This paper analyzes the forecasting properties of a well-known physics-based model, the European Center for Medium-Range Weather Forecasts (ECMWF) Wave Model, and two statistical techniques, time-varying parameter regressions and neural networks. Thirteen data sets at locations in the Atlantic and Pacific Oceans and the Gulf of Mexico are tested. The quantities to be predicted are the significant wave height, the wave period, and the wave energy flux. In the initial tests, the ECMWF model and the statistical models are compared directly. The statistical models do better at short horizons, producing more accurate forecasts in the 1-5 h range. The ECMWF model is superior at longer horizons. The convergence point, at which the two methods achieve comparable degrees of accuracy, is in the area of 6 h. By implication, the physics-based model captures the underlying signals at lower frequencies, while the statistical models capture relationships over shorter intervals. Further tests are run in which the forecasts from the ECMWF model are used as inputs in regressions and neural networks. The combined models yield more accurate forecasts than either one individually.     

A sample changer for automated seawater nutrient analysis systems

An automatic sample changer based upon a commercially available 20-port rotary valve has been developed for use in automated seawater nutrient analyses. All parts exposed to seawater are of stainless steel, Teflon®, or Kel-F®. The sampler has proven to be rugged and efficient in both shore and shipboard laboratories.     

The accumulation rate of meteorite falls at the Earth's surface: The view from Roosevelt County,New Mexico

Abstract— The discovery of 154 meteorite fragments within an 11 km² area of wind-excavated basins in Roosevelt County, New Mexico, permits a new calculation of the accumulation rate of meteorite falls at the Earth's surface. Thermoluminescence dating of the coversand unit comprising the prime recovery surface suggests the maximum terrestrial age of the meteorites to be about 16.0 ka. The 68 meteorite fragments subjected to petrological analyses represent a minimum of 49 individual falls. Collection bias has largely excluded carbonaceous chondrites and achondrites, requiring the accumulation rate derived from the recovered samples to be increased by a factor of 1.25. Terrestrial weathering destroying ordinary chondrites can be modelled as a first-order decay process with an estimated half-life of 3.5 ± 1.9 ka on the semiarid American High Plains. Having accounted for the age of the recovery surface, area of field searches, pairing of finds, collection bias and weathering half-life, we calculate an accumulation rate of 9.4 × 10² falls/a per 10⁶ km² for falls > 10 g total mass. This figure exceeds the best-constrained previous estimate by more than an order of magnitude. One possible reason for this disparity may be the extraordinary length of the fall record preserved in the surficial geology of Roosevelt County. The high accumulation rate determined for the past 16 ka may point to the existence of periods when the meteorite fall rate was significantly greater than at present.     

The host galaxies of active galactic nuclei

We examine the properties of the host galaxies of 22 623 narrow-line active galactic nuclei (AGN) with  0.02 < z < 0.3  selected from a complete sample of 122 808 galaxies from the Sloan Digital Sky Survey. We focus on the luminosity of the [O  iii ]λ5007 emission line as a tracer of the strength of activity in the nucleus. We study how AGN host properties compare with those of normal galaxies and how they depend on L [O  iii ]. We find that AGN of all luminosities reside almost exclusively in massive galaxies and have distributions of sizes, stellar surface mass densities and concentrations that are similar to those of ordinary early-type galaxies in our sample. The host galaxies of low-luminosity AGN have stellar populations similar to normal early types. The hosts of high-luminosity AGN have much younger mean stellar ages. The young stars are not preferentially located near the nucleus of the galaxy, but are spread out over scales of at least several kiloparsecs. A significant fraction of high-luminosity AGN have strong Hδ absorption-line equivalent widths, indicating that they experienced a burst of star formation in the recent past. We have also examined the stellar populations of the host galaxies of a sample of broad-line AGN. We conclude that there is no significant difference in stellar content between type 2 Seyfert hosts and quasars (QSOs) with the same [O  iii ] luminosity and redshift. This establishes that a young stellar population is a general property of AGN with high [O  iii ] luminosities.     

Hyperspectral mapping of alteration assemblages within a hydrothermal vug at the Haughton impact structure,Canada

Meteorite impacts on Earth and Mars can generate hydrothermal systems that alter the primary mineralogies of rocks and provide suitable environments for microbial colonization. We investigate a calcite–marcasite‐bearing vug at the ~23 km diameter Haughton impact structure, Devon Island, Nunavut, Canada, using imaging spectroscopy of the outcrop in the field (0.65–1.1 μm) and samples in the laboratory (0.4–2.5 μm), point spectroscopy (0.35–2.5 μm), major element chemistry, and X‐ray diffraction analyses. The mineral assemblages mapped at the outcrop include marcasite; marcasite with minor gypsum and jarosite; fibroferrite and copiapite with minor gypsum and melanterite; gypsum, Fe³⁺ oxides, and jarosite; and calcite, gypsum, clay, microcline, and quartz. Hyperspectral mapping of alteration phases shows spatial patterns that illuminate changes in alteration conditions and formation of specific mineral phases. Marcasite formed from the postimpact hydrothermal system under reducing conditions, while subsequent weathering oxidized the marcasite at low temperatures and water/rock ratios. The acidic fluids resulting from the oxidation collected on flat‐lying portions of the outcrop, precipitating fibroferrite + copiapite. That assemblage then likely dissolved, and the changing chemistry and pH resulting from interaction with the calcite‐rich host rock formed gypsum‐bearing red coatings. These results have implications for understanding water–rock interactions and habitabilities at this site and on Mars.     

Spaceborne visible and thermal infrared lithologic mapping of impact‐exposed subsurface lithologies at the Haughton impact structure,Devon Island,Canadian High Arctic: Applications to Mars

Abstract— This study serves as a proof‐of‐concept for the technique of using visible‐near infrared (VNIR), short‐wavelength infrared (SWIR), and thermal infrared (TIR) spectroscopic observations to map impact‐exposed subsurface lithologies and stratigraphy on Earth or Mars. The topmost layer, three subsurface layers and undisturbed outcrops of the target sequence exposed just 10 km to the northeast of the 23 km diameter Haughton impact structure (Devon Island, Nunavut, Canada) were mapped as distinct spectral units using Landsat 7 ETM+ (VNIR/SWIR) and ASTER (VNIR/SWIR/TIR) multispectral images. Spectral mapping was accomplished by using standard image contrast‐stretching algorithms. Both spectral matching and deconvolution algorithms were applied to image‐derived ASTER TIR emissivity spectra using spectra from a library of laboratory‐measured spectra of minerals (Arizona State University) and whole‐rocks (Ward's). These identifications were made without the use of a priori knowledge from the field (i.e., a “blind” analysis). The results from this analysis suggest a sequence of dolomitic rock (in the crater rim), limestone (wall), gypsum‐rich carbonate (floor), and limestone again (central uplift). These matched compositions agree with the lithologic units and the pre‐impact stratigraphic sequence as mapped during recent field studies of the Haughton impact structure by Osinski et al. (2005a). Further conformation of the identity of image‐derived spectra was confirmed by matching these spectra with laboratory‐measured spectra of samples collected from Haughton. The results from the “blind” remote sensing methods used here suggest that these techniques can also be used to understand subsurface lithologies on Mars, where ground truth knowledge may not be generally available.