ANABRANCHING RIVERS: THEIR CAUSE,CHARACTER AND CLASSIFICATION

Anabranching rivers consist of multiple channels separated by vegetated semi-permanent alluvial islands excised from existing floodplain or formed by within-channel or deltaic accretion. These rivers occupy a wide range of environments from low to high energy, however, their existence has never been adequately explained. They occur concurrently with other types of channel pattern, although specific requirements include a flood-dominated flow regime and banks that are resistant to erosion, with some systems characterized by mechanisms to block or constrict channels, thereby triggering avulsion. The fundamental advantage of an anabranching river is that, by constructing a semi-permanent system of multiple channels, it can concentrate stream flow and maximize bed-sediment transport (work per unit area of the bed) under conditions where there is little or no opportunity to increase gradient. On the basis of stream energy, sediment size and morphological characteristics, six types of anabranching river are recognized; types 1–3 are lower energy and types 4–6 are higher energy systems. Type 1 are cohesive sediment rivers (commonly termed anastomosing) with low w/d ratio channels that exhibit little or no lateral migration. They are divisible into three subtypes based on vegetative and sedimentary environment. Type 2 are sand-dominated, island-forming rivers, and type 3 are mixed-load laterally active meandering rivers. Type 4 are sand-dominated, ridge-forming rivers characterized by long, parallel, channel-dividing ridges. Type 5 are gravel-dominated, laterally active systems that interface between meandering and braiding in mountainous regions. Type 6 are gravel-dominated, stable systems that occur as non-migrating channels in small, relatively steep basins. Anabranching rivers represent a relatively uncommon but widespread and distinctive group that, because of particular sedimentary, energy-gradient and other hydraulic conditions, operate most effectively as a system of multiple channels separated by vegetated floodplain islands or alluvial ridges.     

Combined flow origin of edgewise intraclast conglomerates: Sellick Hill Formation (Lower Cambrian), South Australia

Unusually thick, coarse grained edgewise intraclast conglomerates occur at eight or more horizons within subtidal nodular and ribbon bedded wackestones and packstones of the Lower Cambrian Sellick Hill Formation, South Australia. The intraclast beds are flat based and laterally discontinuous, forming bar-like structures that must have exhibited bathymetric relief of as much as 1 m. The internal fabrics of these beds are variable. Thinner beds are dominated by flat-lying intraclasts; thicker beds contain both chaotic, randomly oriented, steeply inclined intraclasts and clusters of fan-shaped, vertically stacked edgewise intraclasts. The Sellick Hill Formation intraclast conglomerates are inferred to have been formed by intense, storm-generated combined flows on a broad, subtidal carbonate ramp. Superimposition of wave-induced oscillatory motions on geostrophic bottom flows during large storms generates short-lived, but exceptionally high instantaneous shear stresses in the bottom boundary layer. Entrainment of the relatively large intraclasts occurs through sliding, rather than pivoting. Edgewise fabrics are a product of asymmetric acceleration and deceleration of intraclasts during passage of waves and the chaotic nature of collisions between intraclasts moving within the boundary layer. Collisions between intraclasts impart a rotating moment, causing intraclasts to tip up during maximum fluid shear stress. Lodgement or packing of clasts in vertical or steeply inclined positions occurs within scours, where intraclasts can wedge between other vertically inclined clasts, or where intraclasts are pinned in steep orientations by collisions with shallowly inclined intraclasts. Differential erosional resistance of the intraclast deposits probably led to the development of sharp lateral changes in thickness. The Sellick Hill Formation intraclast conglomerates record erosion and reworking of subtidal, subfairweather wave base environments by exceptionally intense and presumably rare storm flows. The intraclast horizons represent a substantial loss in stratigraphic resolution due to widespread erosion of the ramp.     

Planned Shopping Centres

Planned shopping centres affect the geographical direction of retailing and the nature of retailing in general. As major marketing outlets for national and international chains they are especially attractive to consumers. This paper examines shopping centres in New Zealand and their impact on stand alone retailers and includes a case study of the Queensgate shopping centre in Lower Hutt.     

Transform-normal extension on the Northern Death Valley fault system, California-Nevada

The Northern Death Valley fault zone is a major right-lateral structure that has accommodated 70 km or more of regional transtensional deformation in Tertiary to Recent time. Extension parallel to its north-west transport direction in the Death Valley region of California has produced ‘pull-apart’ structures that are responsible for opening the central Death Valley rhombochasm. In several ranges along the length of the Northern Death Valley fault zone, there is also evidence for extension directed to the south-west, normal to strike-slip movement. Evidence from the Funeral, Grapevine and Cottonwood Mountains suggests that a significant amount of down-dip slip has occurred on the Northern Death Valley fault zone and parallel structures (together referred to as the Northern Death Valley fault system) coeval with the majority of right-lateral slip and transform-parallel extension. As a result of both these components of extension, a separate basin opened in northern Death Valley with an orientation and architecture very different from that of central Death Valley. In addition, the Northern Death Valley fault system may be responsible for the present topography of the Funeral and Grapevine Mountains. Transform-normal extension appears to be the result of a misorientation of the Northern Death Valley fault zone within the regional stress field over the past 6 Myr, as suggested by simple geometric calculations.     

Rates of aerodynamic entrainment in a developing boundary layer

Despite its significance for inception of grain transport by wind, the initial dislodgement of grains from a static surface by aerodynamic forces of drag and lift in the absence of grain collision has received little attention. This paper describes a series of wind-tunnel experiments in which the erosion of narrow strips of loose grains from the roughened surface of a flat plate exposed to a range of wind speeds was examined. The progressive downwind development of the boundary layer over the plate provided a range of airflow conditions which permitted systematic evaluation of grain entrainment rates arising from purely aerodynamic forces. Use of closely graded size fractions in flat, single grain layers resting on identical, fixed grain support eliminated the effects of surface irregularities and impacts from saltation. Results show that erosion of strips of loose grains develops with time according to an inverse exponential function in which the entrainment rate time constant relates to Shields dimensionless shear stress function. An empirical expression defining aerodynamic entrainment rate in terms of rate of strip erosion is derived and comparisons are made between present and published data. The need for additional data to resolve several questions raised by the present investigation is stressed. In addition, a simple, objective technique for accurate determination of the aerodynamic entrainment threshold of any loose, granular sediment is proposed.     

Lake Hoare, Antarctica: sedimentation through a thick perennial ice cover

Lake Hoare in the Dry Valleys of Antarctica is covered with a perennial ice cover more than 3 m thick, yet there is a complex record of sedimentation and of growth of microbial mats on the lake bottom. Rough topography on the ice covering the lake surface traps sand that is transported by the wind. In late summer, vertical conduits form by melting and fracturing, making the ice permeable to both liquid water and gases. Cross-sections of the ice cover show that sand is able to penetrate into and apparently through it by descending through these conduits. This is the primary sedimentation mechanism in the lake. Sediment traps retrieved from the lake bottom indicate that rates of deposition can vary by large amounts over lateral scales as small as 1 m. This conclusion is supported by cores taken in a 3 × 3 grid with a spacing of 1.5 m. Despite the close spacing of the cores, the poor stratigraphic correlation that is observed indicates substantial lateral variability in sedimentation rate. Apparently, sand descends into the lake from discrete, highly localized sources in the ice that may in some cases deposit a large amount of sand into the lake in a very short time. In some locations on the lake bottom, distinctive sand mounds have been formed by this process. They are primary sedimentary structures and appear unique to the perennially ice-covered lacustrine environment. In some locations they are tens of centimetres high and gently rounded with stable slopes; in others they reach ～ 1 m in height and have a conical shape with slopes at angle of repose. A simple formation model suggests that these differences can be explained by local variations in water depth and sedimentation rate. Rapid colonization and stabilization of fresh sand surfaces by microbial mats composed of cyanobacteria, eukaryotic algae, and heterotrophic bacteria produces a complex intercalation of organic and sandy layers that are a distinctive form of modern stromatolites.     

The character of seismo-turbidites in the S-1 sapropel, Zakinthos and Strofadhes basins, Greece

The early Holocene S-1 sapropelic sequence in the northwest Hellenic Trench has been studied in six piston cores from the Zakinthos and Strofadhes basins. The S-1 sequence, 0.7-3.5 m thick, consists principally of silt to mud turbidites, with rare, thick, disorganized, sandy turbidites. These lithofacies are described and compared with fine-grained turbidites from the literature. Petrographical data, including the abundance of organic carbon and planktonic microfossils, indicate that the principal source of sediment to the turbidites was from the continental slope. On the basis of composition and texture, five turbidite units can be correlated between the two basins. These basins are fed by separate but adjacent drainage systems. The apparently synchronous occurrence of turbidites in the two drainage systems suggests that the turbidity currents were seismically triggered. Some of the turbidites show poorly organized beds which may reflect the slump origin and the short (30 km) distances of travel. Turbidites were deposited more frequently in the S-1 sapropelic interval than in the over- and underlying sediments. Application of slope stability analysis shows that on the 8° slopes above the basins, a 10-cm-thick sapropel would have a factor of safety of about 2, and would fail with earthquake accelerations in excess of 0.08 g. The frequency of earthquakes likely to produce such accelerations is similar to the observed frequency of turbidites. The low strength of the sapropelic sediment makes it particularly susceptible to such failure. Similar thin-skinned slumping may be an important process for the initiation of turbidity currents in other environments where there are steep slopes or high sedimentation rates.     

Aerodynamic entrainment threshold: effects of boundary layer flow conditions

Experimental data are presented demonstrating the influence of boundary layer flow conditions on aerodynamic entrainment of grains in the absence of intersaltation collisions. New methods are proposed for (1) the unambiguous determination of aerodynamic threshold for any grain population and (2) approximation of the probability density function (PDF) distributions of threshold shear velocity for aerodynamic entrainment. In wind tunnel experiments, the orderly spatial development of flow conditions within a developing boundary layer over the roughened surface of a flat plate constrains the aerodynamic threshold condition in terms of both mean and fluctuating values. Initial grain dislodgements and subsequent erosion from narrow strips of loose, finely fractionated ballotini were recorded photographically as wind speed was increased. Boundary layer parameters, including average threshold shear velocity (U_*t), were calculated using the momentum integral method. Direct observations show that sporadic oscillation of grains preceded dislodgement. At slightly higher velocities most grains rolled over their neighbours before entering saltation. Initial entrainment in spatially semi-organized flurries of 50 or more grains was followed by quiescent periods at airflow velocities close to threshold. These observations provide strong circumstantial evidence linking both the nature and spatial pattern of initial grain motions to sweep events during the fluid bursting process. For each grain fraction, values of U_*t were found to span an unexpectedly wide range and to decrease downwind from the leading edge of the plate as turbulence intensity increased. A probabilistic entrainment model is applied to the aerodynamic threshold condition so as to incorporate the effects of changing turbulent flow regimes over the plate. Analysis of strip erosion curves gives both an objective definition of the threshold condition and usable approximations of the PDF for U_*t required by the model and for future stochastic treatment of the threshold condition.