基于光谱和纹理的SVM矿化蚀变信息提取研究

针对传统矿化信息提取方法单一,利用光谱或纹理、信息量相对较少、需要大量样本的缺陷,利用基于光谱和纹理的支持向量机(SVM)原理,建立矿化信息提取模型.选择青海泽库县析界日地区作为典型研究区.首先提取研究区光谱和纹理信息,选取训练样本;然后求解最优超平面,进而确定决策函数;最后泛化推广识别其他待识别的样本.通过所提取的遥感蚀变异常信息与重砂异常点叠加分析,叠加基本吻合;从野外实地验证来看,均发现了不同程度的矿化现象,并指出了5个重点异常区.     

Distribution Characteristics of Sulfur and the Main Harmful Trace Elements in China’s Coal

To promote the rational development and use of clean coal resources in China, data on the regional and age distribution of sulfur, arsenic and other harmful elements in Chinese coal was broadly collected, tested for content, and analyzed. Coal in northwestern China is characterized by low to extremely low levels of sulfur; the coal of the Taiyuan Formation in northern China mainly has high-sulfur content; that of the Shanxi Formation is mainly characterized by low sulfur coal; and the Late Permian coal in southern China has overall higher sulfur content; other regions have low sulfur coal. The average content of harmful trace elements in the bulk of China＇s coal is similar to the corresponding content in the coal of the North America and the rest of the world, whereas the content of various elements （Hg, Sb and Se） is different in magnitude to the corresponding percentage in the crust. The average content of the elements Cr, Se, Co, Be, U, Br in Late Permian coal in S China ranks first in the country whereas the average content of Hg and CI in the coals of Late Carboniferous to Early Permian age in N China are the highest. The average content of Mn in Early and Middle Jurassic coal is higher in NW China. The high content of harmful elements in some coal should cause particular concern both in the development and utilization of coal.     

四川义敦地区早中三叠世义敦群岩相古地理

经过对四川义敦地区中下三叠统党思组、列衣纽涉及到的9幅1：5万区调图幅和18条剖面、沉积等厚线的综合分析研究,认为该区主体部分在早中三叠世沉积环境经历了深海盆地海底扇中-外扇相→深海盆地浊流相→下斜坡相→上斜坡相→外陆棚相→外陆棚-上斜坡相的演化。岩相古地理图上的沉积等厚线显示,该区有上麻绒盆地和义敦盆地等2个沉积中心,在拉纳山一带还出出现有拗陷盆地。     

测井仪器的故障分析与排除思路

TYSC-3Q与PSJ-2型数字测井仪是目前煤田测井中常用的二种测井仪器,在使用过程中难免发生诸如测井控制故障、声速探管故障、密度三侧向探管故障、井温、井液电阻率探管故障、电法面板故障、数字测井面板故障、电测井故障等常见故障类型。通过对各类故障因素进行剖析,指出了故障易发生的部位,并详细的介绍了检查的方法及故障的排除步骤。     

洞穴完井工艺在寿阳地区煤层气钻井中的应用

洞穴完井工艺包括钻井、完井、排水采气等工序,为提高煤层渗透率,最大限度的保证煤层气解析与运移,洞穴完井一般要求有效井径3-4m,及一定范围的破碎带。远东能源公司为开采寿阳地区15#煤层中的煤层气,部署了4口生产井．其井身设计为三开结构。钻井主要设备为T685WS顶驱车载钻机及多台不同型号的空压机,采用潜孔锤冲击钻进．以空气、空气泡沫为冲洗介质,钻进至15#目标煤层底板以下46m处完钻,然后利用可伸缩式扩孔器进行扩孔。在扩孔至距三开井底8～10m时．开始采用空气和清水憋压,通过瞬间释放压力,使煤层坍塌,如此反复,至造穴直径达到要求。由于严格按照技术标准及操作流程作业,采取的技术措施合理,4口井均已顺利投入生产,增产效果显著。可见该种洞穴完井技术的应用,不仅可以保护煤层原生结构及环境,并且还能减少煤层气射孔、压裂等环节的费用．对于煤层气井施工具有重要的经济意义。     

《干旱区地理》的引文统计分析

本文使用文献计量学中的引文分析方法,以《干旱区地理》为调查样本进行了统计分析。《干旱地理》１９８５－１９９４年共版４３期,刊登论文５５８篇,其中附有引文的论文４３６篇,引文２７６６条。     

遥感技术在煤炭地质中的应用现状及前景

介绍了遥感技术在煤炭资源调查和评价、煤矿区地质灾害调查和评估、生态环境及污染调查评价和监测以及煤矿三维可视化仿真规划系统建设方面的应用研究现状及所取得的主要成果，并结合遥感技术的发展方向，展望了其在煤炭地质中的应用前景。     

Comparison of magnetic parameters with vehicular Br levels in urban roadside soils

Chemical methods are generally chosen to monitor soil pollution but magnetic measurements proved to yield additional information at low cost and less time consumption. In this investigation, the novel use of rapid and non-destructive magnetic measurements to characterize Br levels in Xuzhou (China) urban roadside soils was reported. X-ray fluorescence spectrometry (XRF) was used to quantify Br in the soil samples. Data from 21 roadside soil samples confirm Br contamination, with a mean level of 4.36 mg kg⁻¹ and a range of 2.4–8.7 mg kg⁻¹. These values are higher than that of unpolluted soils in Xuzhou that averages 1.1 mg kg⁻¹. Hierarchical clustering analysis shows Br in Xuzhou roadside soils is mainly from road traffic. Clear correlations between Br levels and simple magnetic parameters [mass specific susceptibility (χ _LF), susceptibility of anhysteretic remanent magnetization (χ _ARM), saturation isothermal remanence (SIRM)] are observed. The present study shows that these three magnetic parameters can be used as a proxy for Br levels in Xuzhou urban roadside soils.     

全数字摄影测量系统DEM生产的质量控制

目前,数字高程模型(DEM)在理论研究和实践应用方面都有了很大的进展,已在测绘、地质、农业、工程、建筑、军事、导航等多个领域得到了广泛应用,因此高效快捷地生产高精度的DEM是十分必要和迫切的。全数字摄影测量系统DEM生产方案是解决这一问题的有效途径,文章针对该系统的特点,提出了加强质量控制的策略和方法,并阐述了对一些实践问题的解决。