Mapping spiny aster infestations with QuickBird imagery

QuickBird satellite imagery acquired in June 2003 and September 2004 was evaluated for detecting the noxious weed spiny aster [Leucosyris spinosa (Benth.) Greene] on a south Texas, USA rangeland area. A subset of each of the satellite images representing a diversity of cover types was extracted and used as a study site. The satellite imagery had a spatial resolution of 2.8 m and contained 11-bit data. Unsupervised and supervised classification techniques were used to classify false colour composite (green, red, and near-infrared bands) images of the study site. Imagery acquired in June was superior to that obtained in September for distinguishing spiny aster infestations. This was attributed to differences in spiny aster phenology between the two dates. An unsupervised classification of the June image showed that spiny aster had producer's and user's accuracies of 90% and 93.1%, respectively, whereas a supervised classification of the June image had producer's and user's accuracies of 90% and 81.8%, respectively. These results indicate that high resolution satellite imagery coupled with image analysis techniques can be used successfully for detecting spiny aster infestations on rangelands.     

A global inventory of coral reef stressors based on satellite observed nighttime lights

In this article, we present a satellite-based approach to gather information about the threat to coral reefs worldwide. Three chosen reef stressors – development, gas flaring and heavily lit fishing boat activity – are analysed using nighttime lights data derived from the Defense Meteorological Satellite Program (DMSP) produced at the National Oceanic & Atmospheric Administration, National Geophysical Data Center (NOAA/NGDC). Nighttime lights represent a direct threat to coral reef ecosystems and are an excellent proxy measure for associated human-caused stressors. A lights proximity index (LPI) is calculated, measuring the distance of coral reef sites to each of the stressors and incorporating the stressor's intensity. Colourized maps visualize the results on a global scale. Area rankings clarify the effects of artificial night lighting on coral reefs on a regional scale. The results should be very useful for reef managers and for state administrations to implement coral reef conservation projects and for the scientific world to conduct further research.     

Field Measurements of Plant Emissivity Spectra: An Experimental Study on Remote Sensing of Vegetation in the Thermal Infrared Region

Spectral features of plant species in the visible to SWIR (0.4–2.5 μm) region have been studied extensively, but scanty attention has been given to plant thermal infrared (TIR: 4–14 μm) properties. This paper presents preliminary results of a study that was conducted first time in India to measure radiance and emissivity properties of eight plant species in TIR spectral region in the field conditions using a FTIR (Fourier Transform Infrared) field spectroradiometer working in 4–14 μm at an agriculture experimental farm. Several spectral features in the emissivity spectra of plant species were observed that are probably related to the leaf chemical constituents, such as cellulose and xylan (hemicellulose) and structural aspects of leaf surface like abundance of trichomes and texture. Observations and results from the field measurements were supported by the laboratory measurements like biochemical analysis. These preliminary field emissivity measurements of leaves in TIR show that there is useful spectral information that may be detectable by field-based instrument. More detailed field and laboratory measurements are underway to explore this research theme.     

BUSINESS AND PLEASURE

Abstract

Mr. Surveyor A walked into the Club, his first visit after a four-months' field season. He entered the lounge, sank into one of the deep luxurious leather arm-chairs and called for his“sundowner“. In a little while he was joined by several other Government officers, glad to see him after his long absence and eager to hear of his bush experiences and to cap them with stories of their own.     

Analysis of urban built-up areas and surface urban heat island using downscaled MODIS derived land surface temperature data

Regional scale urban built-up areas and surface urban heat islands (SUHI) are important for urban planning and policy formation. Owing to coarse spatial resolution (1000 m), it is difficult to use Moderate Resolution Imaging Spectroradiometer (MODIS) Land surface temperature (LST) products for mapping urban areas and visualization, and SUHI-related studies. To overcome this problem, the present study downscaled MODIS (1000 m resolution)-derived LST to 250 m resolution to map and visualize the urban areas and identify the basic components of SUHI over 12 districts of Punjab, India. The results are compared through visual interpretation and statistical procedure based on similarity analysis. The increased entropy value in the downscaled LST signifies higher information content. The temperature variation within the built-up and its environs is due to difference in land use and is depicted better in the downscaled LST. The SUHI intensity analysis of four cities (Ludhiana, Patiala, Moga and Vatinda) indicates that mean temperature in urban built-up core is higher (38.87 °C) as compared to suburban (35.85 °C) and rural (32.41 °C) areas. The downscaling techniques demonstrated in this paper enhance the usage of open-source wide swath MODIS LST for continuous monitoring of SUHI and urban area mapping, visualisation and analysis at regional scale. Such initiatives are useful for the scientific community and the decision-makers.     

Microwave response of seasonal snow-cover measured by using a ground-based radiometer at 6.93 and 18.7 ghz frequencies and at dual polarization

Snow cover is an important variable for climatic and hydrologic models due to its effects on surface albedo, energy, and moisture budgets. Passive microwave sensors can be used to monitor temporal and spatial variations in large-scale snow cover parameters, avoiding problems of cloud cover and polar nights. In the present study, brightness temperature values were estimated (using calibration curves) for moist snow on natural and blackbody/metal surface. T_B response on snow depth, density, SWE and angular variation from nadir were measured and found that T_B decreases with increase of snow depth and with increase of angle from nadir. Empirical relations were used to estimate emissivity, dielectric constant and dielectric loss factor. It was observed that emissivity decreases with the increase of dielectric constant. The dielectric constant and dielectric loss factor both increases with the increase of density. Experiments were performed during winter of year 2005 at Dhundi and Solang (H.P.), India, using ground based passive microwave radiometer having 6.9 and 18.7 GHz antenna frequencies at dual polarization.     

A Keystone Transform Without Interpolation for SAR Ground Moving-Target Imaging

Synthetic aperture radar (SAR) image formation for a ground moving target necessitates the compensation of the unknown target trajectory. The keystone transform has been employed to remove the linear component of the range migration for the moving target, where interpolation is required. In this letter, a realization of the keystone transform avoiding interpolation is presented. The kernel of this transform, i.e., the range-frequency-dependent azimuth time rescaling, is implemented using only complex multiplications and fast Fourier transforms based on the scaling principle, which has been successfully applied in the equalization of the space-variant range cell migration in SAR processing. In addition, the moving target is coarsely focused according to the SAR geometry and the platform velocity while exploiting the scaling principle. This preliminary focusing is helpful in the isolation of the moving target from ground clutter, so as to facilitate a more refined processing with respect to each mover. SAR raw data combined with simulated echoes of moving targets are utilized to validate the presented approach     

Spatial Technologies in Deriving the Morphotectonic Characteristics of Tectonically Active Western Tripura Region,Northeast India

Employing integrated remote sensing and GIS technology the western most part of Tripura region (Northeast India) and adjoining Bangladesh region has been investigated in the light of its geomorphological characteristics. Nature of fold ridges, several streams and the respective drainage basins are well depicted in satellite images and digital elevation model providing meaningful information. Quantitative parameters such as stream sinuosity, drainage basin asymmetry, basin elongation ratio have been computed. Main rivers of the study area, namely the Gomti and Khowai follows extremely meandering path and crosses through the transversely faulted anticlinal ridges. Fluvial anomalies viz. shift in stream channel and the abandoned meandering loops have been inferred and mapped. The Haora river in the study area exhibits northward shift in some part. Development of drainage system towards north and south from the drainage divide along the latitude 23°45^′N indicated up arching of the region which is also corroborated by the extracted topographic profiles. It has been observed that several tributary streams have gone dry and agricultural fields are developed along the dried up stream. These derived parameters remained useful to understand the nature of topographical modification attributed to the possible tectonic activity.     

Comparison of Two Data Smoothing Techniques for Vegetation Spectra Derived From EO-1 Hyperion

Hyperspectral data are generally noisier compared to broadband multispectral data because their narrow bandwidth can only capture very little energy that may be overcome by the self-generated noise inside the sensors. It is desirable to smoothen the reflectance spectra. This study was carried out to see the effect of smoothing algorithms - Fast-Fourier Transform (FFT) and Savitzky–Golay (SG) methods on the statistical properties of the vegetation spectra at varying filter sizes. The data used in the study is the reflectance spectra data obtained from Hyperion sensor over an agriculturally dominated area in Modipuram (Uttar Pradesh). The reflectance spectra were extracted for wheat crop at different growth stages. Filter sizes were varied between 3 and 15 with the increment of 2. Paired t-test was carried out between the original and the smoothed data for all the filter sizes in order to see the extent of distortion with changing filter sizes. The study showed that in FFT, beyond filter size 11, the number of locations within the spectra where the smooth spectra were statistically different from its original counterpart increased to 14 and reaches 21 at the filter size 15. However, in SG method, number of statistically different locations were more than those found in the FFT, but the number of locations did not changing drastically. The number of statistically disturbed locations in SG method varied between 16 and 19. The optimum filter size for smoothing the vegetation spectra was found to be 11 in FFT and 9 in SG method.     

Measuring tree stem diameters using intensity profiles from ground-based scanning lidar from a fixed viewpoint

This paper presents a method for using the intensity of returns from a scanning light detection and ranging (lidar) system from a single viewing point to identify the location and measure the diameter of tree stems within a forest. Such instruments are being used for rapid forest inventory and to provide consistent supporting information for airborne lidars. The intensity transect across a tree stem is found to be consistent with a simple model parameterised by the range and diameter of the trunk. The stem diameter is calculated by fitting the model to transect data. The angular span of the stem can also be estimated by using a simple threshold where intensity values are tested against the expected intensity for a stem of given diameter. This is useful when data are insufficient to fit the model or the stem is partially obscured. The process of identifying tree positions and trunk diameters is fully automated and is shown to be successful in identifying a high proportion of trees, including some that are partially obscured from view. The range and bearing to trees are in excellent agreement with field data. Trunk angular span and diameter estimations are well correlated with field measurements at the plot scale. The accuracy of diameter estimation is found to decrease with range from the scanning position and is also reduced for stems subtending small angles (less than twice the scanning resolution) to the instrument. A method for adjusting survey results to compensate for trees missed due to obscuration from the scanning point and the use of angle count methods is found to improve basal area estimates and achieve agreement within 4% of field measurements.