黄土高原发展过程中的五大转折

1 Introduction W hatim portanttransform ations have taken place during the form ation ofthe Loess Plateau in China? Research on this problem has especially im portantscientific significance forus to learn ofthe evolution oftheLoessPlateau and predictthe f…     

Modelling interactions between fold–thrust belt deformation, foreland flexure and surface mass transport

Interactions between fold and thrust belt deformation, foreland flexure and surface mass transport are investigated using a newly developed mathematical model incorporating fully dynamic coupling between mechanics and surface processes. The mechanical model is two dimensional (plane strain) and includes an elasto‐visco‐plastic rheology. The evolving model is flexurally compensated using an elastic beam formulation. Erosion and deposition at the surface are treated in a simple manner using a linear diffusion equation. The model is solved with the finite element method using a Lagrangian scheme with marker particles. Because the model is particle based, it enables straightforward tracking of stratigraphy and exhumation paths and it can sustain very large strain. It is thus ideally suited to study deformation, erosion and sedimentation in fold–thrust belts and foreland basins. The model is used to investigate how fold–thrust deformation and foreland basin development is influenced by the non‐dimensional parameter , which can be interpreted as the ratio of the deformation time scale to the time scale for surface processes. Large values of imply that the rate of surface mass transport is significantly greater than the rate of deformation. When , the rates of surface processes are so slow that one observes a classic propagating fold–thrust belt with well‐developed wedge top basins and a largely underfilled foreland flexural depression. Increasing causes (1) deposition to shift progressively from the wedge top into the foredeep, which deepens and may eventually become filled, (2) widespread exhumation of the fold–thrust belt, (3) reduced rates of frontal thrust propagation and possible attainment of a steady‐state orogen width and (4) change in the style and dynamics of deformation. Together, these effects indicate that erosion and sedimentation, rather than passively responding to tectonics, play an active and dynamic role in the development of fold–thrust belts and foreland basins. Results demonstrate that regional differences in the relative rates of surface processes (e.g. because of different climatic settings) may lead to fold–thrust belts and foreland basins with markedly different characteristics. Results also imply that variations in the efficiency of surface processes through time (e.g., because of climate change or the emergence of orogens above sea level) may cause major temporal changes in orogen and basin dynamics.     

城市土地潜力分析--以南京市为例

研究城市土地潜力是城市建设者合理利用城市土地、提高城市土地利用效率、保护耕地的基础。该文利用GIS对土地、规划、环保、人口等相关数据进行整合,从房地产开发的角度建立测算最低经济容积率的模型,求得每块城市土地的经济容积率;基于GIS空间分析功能,分析城市土地利用现状与最低经济容积率,并用地域环境质量综合评价、历史文化名城保护规划等数据对结果进行修正,得出南京市城市土地潜力的数量、质量及空间分布。     

产业集群与浦东集成电路产业建设

产业集群的形成是现代经济发展中的一个非常重要的现象。浦东集成电路产业集群是“国家集成电路产业基地”的核心,产业集群的形成对浦东集成电路产业提高竞争力具有重要的意义。本文分析了浦东集成电路产业集群的发展现状。指出目前浦东集成电路产业集群的建设还处于一个初步阶段,无论是企业间,还是企业与高校、科研机构或者其他组织机构间的创新合作交流都十分有限,从而在一定程度上抑制了集成电路产业整体学习能力和竞争力的提高。文章针对这些问题,从产业链、区域性产业发展政策、环境配套设施建设等方面提出了加强浦东集成电路产业集群建设的对策建议。     

大气CO2浓度升高对土壤中不同粒级碳的影响

不同粒级土壤中的碳有着不同的周转规律，在高CO2浓度条件下，它们含量的变化将在一定程度上反映土壤碳是累积还是减少，对明确土壤碳的变化趋势有重要意义．采用田间培养试验初步模拟研究在高CO2浓度条件下土壤不同粒级碳的分布．结果表明，加入秸秆培养1年，由于CO2浓度升高的原因导致在低氮（LN）、常规氮（NN）和高氮（HN）水平下土壤中碳分别增加0．01、1．10、1．22g／kg，表现为粒级〈53μm土壤颗粒中碳分别增加1．53、2．19、2．70g／kg．粒级〈53μmm土壤颗粒碳量的增加，主要是由于其重量分配百分数显著增加36．2％，碳浓度增加5．4％；粒级〉250μm和250～53μm土壤颗粒部分虽然其碳浓度分别增加20．8％和17．3％（P〈0．05），怛由于重量分配百分数分别显著降低22．8％和36．1％，结果碳量降低．试验表明高CO2浓度导致不同粒级土壤的分配及碳浓度的变化；高氮施肥水平下有增加土壤碳量特别是小粒级土壤碳量的趋势．     

Early Holocene water budget of the Nakuru-Elmenteita basin, Central Kenya Rift

The Nakuru-Elmenteita basin in the Central Kenya Rift, contains two shallow, alkaline lakes, Lake Nakuru (1770 m above sea level) and Lake Elmenteita (1786 m). Ancient shorelines and lake sediments at 1940 m suggest that these two lakes formed a single large and deep lake as a result of a wetter climate during the early Holocene. Here, we used a hydrological model to compare the precipitation–evaporation balance during the early Holocene to today. Assuming that the Nakuru-Elmenteita basin was hydrologically closed, as it is today, the most likely climate scenario includes a 45% increase in mean-annual precipitation, a 0.5°C decrease in air temperature, and an increase of 9% in cloud coverage from the modern values. Compared to the modeling results from other East African lake basins, this dramatic increase in precipitation seems to be unrealistic. Therefore, we propose a significant flow of water from the early Holocene Lake Naivasha in the south towards the Nakuru-Elmenteita basin to compensate the extremely negative hydrological budget of this basin. Since we did not find any field evidence for a surface connection, as often proposed during the last 70 years, the hydrological deficit of the Nakuru-Elmenteita basin could have also been compensated by a subsurface water exchange.     

Clinoform architecture and along‐strike facies variability through an exhumed erosional to accretionary basin margin transition

Exhumed basin margin‐scale clinothems provide important archives for understanding process interactions and reconstructing the physiography of sedimentary basins. However, studies of coeval shelf through slope to basin‐floor deposits are rarely documented, mainly due to outcrop or subsurface dataset limitations. Unit G from the Laingsburg depocentre (Karoo Basin, South Africa) is a rare example of a complete basin margin scale clinothem (>60 km long, 200 m‐high), with >10 km of depositional strike control, which allows a quasi‐3D study of a preserved shelf‐slope‐basin floor transition over a ca. 1,200 km² area. Sand‐prone, wave‐influenced topset deposits close to the shelf‐edge rollover zone can be physically mapped down dip for ca. 10 km as they thicken and transition into heterolithic foreset/slope deposits. These deposits progressively fine and thin over tens of km farther down dip into sand‐starved bottomset/basin‐floor deposits. Only a few km along strike, the coeval foreset/slope deposits are bypass‐dominated with incisional features interpreted as minor slope conduits/gullies. The margin here is steeper, more channelized and records a stepped profile with evidence of sand‐filled intraslope topography, a preserved base‐of‐slope transition zone and sand‐rich bottomset/basin‐floor deposits. Unit G is interpreted as part of a composite depositional sequence that records a change in basin margin style from an underlying incised slope with large sand‐rich basin‐floor fans to an overlying accretion‐dominated shelf with limited sand supply to the slope and basin floor. The change in margin style is accompanied with decreased clinoform height/slope and increased shelf width. This is interpreted to reflect a transition in subsidence style from regional sag, driven by dynamic topography/inherited basement configuration, to early foreland basin flexural loading. Results of this study caution against reconstructing basin margin successions from partial datasets without accounting for temporal and spatial physiographic changes, with potential implications on predictive basin evolution models.