Hosts文件的作用与应用

本文通过对临汾市气象部门办公信息网中多个站、多次出现的问题的分析,找出原因所在,并针对性的做了分析并提出了解决的方法。介绍了HOSTS文件的功能,并根据HOSTS文件的功能,对我们工作中出现的问题给予解决和指导,在保障网络畅通、网络安全中都起到重要作用。     

基于二维小波变换的FMI图象分割

为了从FMI资料中定量提取参数，一个重要的步骤是从实际FMI资料中分离出反映溶孔、溶洞、裂缝的子图像。本文给出的方法，考虑图像像元邻域的特征，应用二维小波变换求出目标与背景边缘的点集，按这个边缘点集的坐标点所对应的原图像像素灰度值的平均值作为分割阈值进行图像分割。实际资料处理表明，应用这种方法可以从实际的FMI资料中准确地分割出孔洞、裂缝的子图像并且可以按深度段连续自动处理，为后续定量计算参数奠定了良好基础。     

An invariance in the carbazoles of petroleum

A remarkable invariance in the ratio of 1,3-dimethylcarbazole （DMC） to 1,6-DMC was discovered in crude oils from the Pearl River Mouth Basin, South China Sea. The remarkably invariant ratio is kept at a constant of about unity regardless of their concentrations, sources or maturities for the sampies. In combination with the molecular structures of 1,3- and 1,6-DMCs, the invariance might indicate that the nitrogen compounds share a common precursor with a skeleton of 1-methylcarbazole and are formed through methylation at C3 and C6 with an essentially identical rate.     

“探宝号”船可变阵列震源的实现及应用

2001年，广州海洋地质调查局对“探宝号”船原有震源更新升级为阵列可变的BOLT震源系统。随着更新改造工程的成功，该船已成为具备承担高分辨率、常规、低频深水油气地震勘探的多功能地震调查船。本文介绍了地震勘探震源的基本工作原理以及三种阵列的分布、波形、频谱等特性。     

松辽盆地古龙凹陷青山口组生排烃扩张微米孔/缝的发现及其意义

笔者等通过电子背散射、二次成像和能谱分析,结合薄片和反射显微镜观察,发现松辽盆地古龙凹陷青山口组页岩中发育了大量由生排烃扩张形成的微米孔和微米缝。生排烃高压扩张微米孔的特点有：①一般只发育在超高压的页岩油储层中;②一般只发育在黏土质长英页岩中,纯黏土岩少见;③多为近圆形或半圆形,直径多在0. 5 μm到数微米,一般1~2 μm,最大可达8 μm;④孔缘一般为以绿泥石为主的黏土,形成不连续的圈环;圈环上缘的黏土多呈弧形或眉状,绿泥石化明显,在背散射图像中呈亮色;⑤孔内多有自生的纳米级葡萄状或豆渣状黏土,是构成封存油气的物质基础;⑥生排烃高压扩张微米孔可以组合成4种类型：即垂向联结成垂直的排烃烟囱型、垂向联结成倾斜的排烃烟囱型、水平联结成顺层的排烃管型和竖面上联结成更大的片状大孔型。排烃烟囱直或微曲,直立或倾斜;宽1~3 μm,最宽可达200 μm;高十几到30 μm,最大可达1500 μm;顶部多与顺层微米缝（或毫米缝）联结,是排烃烟囱的最终泄压和泄油气的总库;生排烃扩张微米孔孔隙度变化大,面孔率一般在5%~6%,局部面孔率最高可达39. 66%。生排烃高压扩张微米缝的特点有：①一般只发育在超高压的页岩油储层中;②一般只发育在黏土质长英页岩中,纯黏土岩少见;③多以顺页理为主的微米缝为主;④略曲的张性缝,多呈锯齿状,绕过刚性矿物;⑤宽度多在0. 5 μm到数十微米;最宽可达150 μm;⑥多与黄铁矿、白云石、磷灰石等自生矿物伴生;⑦多与生排烃扩张微米孔和排烃烟囱相连。生排烃扩张微米孔缝的形成动力主要有两种：一种是烃类流体的高压扩张力;第二种是烃类流体的化学溶蚀力。笔者等计算了形成这种生排烃微米孔和微米缝的压力,形成生排烃扩张微米孔从1500 m的44. 74 MPa到2500 m深的74. 81 MPa;形成生排烃扩张微米缝的排烃压力稍大,在相同深度比形成生排烃扩张微米孔大3 MPa。生排烃扩张微米孔缝与其他孔缝相连构成了一个储运网络,使储层的储集能力和渗透性大幅增加,是可动用储量的主要贡献者,为古龙页岩油的开发创造了有利条件。生排烃扩张微米孔缝的发现对于古龙页岩油的勘探开发具有重要意义,同时对于页岩油储层的研究具有启发作用。     

改进的能量守恒方法及其在CHAMP重力场恢复中的应用

An efficient method for gravity field determination from CHAMP orbits and accelerometer data is referred to as the energy balance approach. A new CHAMP gravity field recovery strategy based on the improved energy balance approach IS developed in this paper. The method simultaneously solves the spherical harmonic coefficients, daily Integration constant, scale and bias parameters. Two 60 degree and order gravitational potential models, XISM-CHAMPO1S from the classical energy balance approach, and XISM-CHAMPO2S from the improved energy balance, are determined using about one year＇s worth of CHAMP kinematic orbits from TUM and accelerometer data from GFZ. Comparisons among XISM-CHAMPO1S, XISM-CHAMPO2S, EIGEN-CGO3C, EIGEN-CHAMPO3S, EIGEN2, ENIGNIS and EGM96 are made. The results show that the XISM-CHAMPO2S model is more accurate than EGM96, EIGENIS, EIGEN2 and XISM-CHAMPO1S at the same degree and order, and has almost the same accuracy as EIGEN-CHAMPO3S.     

山东省地震台网中心网站建设

主要介绍了山东省地震中心网站的页面栏目设计和页面具体内容,介绍了网站的具体功能,以及网站制作的技术与方法,通过访问该网站可以了解到山东省地震台网中心的各种信息,并且能够查询到山东省2002年以来大于2.0级的地震.     

莒县长岭镇整合矿产资源促进矿业经济可持续发展

日照市莒县长岭镇走规模化、集约化经营之路,使该镇一度陷入低谷的砖瓦产业重新焕发生机,一度外流的投资业户重新归来。截至目前,全镇砖瓦厂已发展到30余处,形成年消耗页岩粘土60万m3,年产砖瓦4.2亿片(块)的生产能力。产品畅销省内外,甚至国外,年产值过亿元,仅此一项税收就占全     

Iron isotopic analyses of geological reference materials on MC-ICP-MS with instrumental mass bias corrected by three independent methods

Here we report iron (Fe) isotopic data of three pure Fe solution standards (IRMM-014, GSB Fe, and NIST 3126a) and five widely used geological reference materials (RMs) from the United States Geological Survey and Geological Survey of Japan obtained on a Neptune Plus multi-collector–inductively coupled plasma–mass spectrometer (MC-ICP-MS) in our laboratory over the past 3 years. The instrumental mass bias was corrected by three independent methods: sample-standard bracketing (SSB), Ni doping?+?SSB, and ⁵⁷Fe–⁵⁸Fe double spike?+?SSB. Measurements reveal that both the Ni doping and double spike methods helped calibrate short-term fluctuations in mass bias. Collectively, almost all measurements of RMs yielded δ⁵⁶Fe within?±?0.05 of recommended values, provided that each sample was measured four times on MC-ICP-MS. For the first time, new recommended values for NIST SRM3126a are reported (δ⁵⁶Fe?=?0.363?±?0.006, 2SE, 95% CI; and δ⁵⁷Fe?=?0.534?±?0.010, 2SE).     

The effect of annealing on the luminescence decay-time of synthetic calcite:Mn

Calcite was synthesized by four methods, and the luminescence decay-time was measured for nine samples before and after heating hydrothermally in the temperature range 200–400°C. Decay-time data were collected between room temperature and approximately 15 K. The decay time at room temperature is approximately 50 ms, with little difference between a given calcite before and after hydrothermal treatment. The decay time at 15 K is always greater than at room temperature as the effect of thermal quenching diminishes. Differences in decay time before and after heating are more apparent at low temperature owing to this reduction in thermal quenching. The decay time decreased significantly in two samples, and an increase in decay time was observed in the remaining seven samples following heating. Among the latter group, the change in decay time was insignificant in three samples. The results are compared with previous data in which it was shown that the effect of heating is to increase the intensity of luminescence.