Assessment of global warming on the island of Tenerife, Canary Islands (Spain). Trends in minimum, maximum and mean temperatures since 1944

Temperature variation is studied at different altitudes and orientation on the island of Tenerife, according to the trends in the mean, maximum and minimum at 21 meteorological stations. Reference series are obtained by sectors, along with a representative overall series for Tenerife, in which temperature shows a statistically significant growth trend of 0.09?±?0.04°C/decade since 1944. Night-time temperatures have risen most (0.17°C?±?0.04°C/decade), while by day they have been more stable. Consequently, the diurnal temperature range between day and night has narrowed. By regions, warming has been much more intense in the high mountains than the other sectors below the inversion layer between 600 and 1,400?m altitude, and progressively milder towards the coast. The temperature rise on the windward (north-northeast) slopes is greater than on the leeward side and could be related to the increase in cloudiness on the northern side. The general warming of the island is less than in continental areas at between 24 and 44oN, being closer to the sea surface temperature in the same area. This is probably explained largely by the insular conditions. In fact warming is more evident in the high mountains (0.14?±?0.07°C/decade), where the tempering effect of the ocean and the impact of changes in the stratocumulus is weaker, being similar to the mean continental values in the northern hemisphere.     

Comparative study of As,Cd, Cu,Cr, Mg,Mn, Ni,Pb and Zn concentrations between sediment and water from estuary and port

The contents of As, Cd, Cu, Cr, Mg, Mn, Ni, Pb and Zn have been determined in sediment and water samples from Valle de las Garzas estuary and Port Manzanillo (Colima, Mexico) using ICP-AES. The concentrations of these elements were used for a comparative study to determine the distribution of heavy metals and to evaluate which elements reflect natural or anthropogenic backgrounds. For this purpose, seven sampling points were selected: Four of them correspond to the lagoon, and three were situated in the port. Statistical analysis of the mineral content was assessed. Initially, data comparison was assessed by statistical tests for each variable. Principal component analysis was then applied considering the influence of all variables at the same time by obtaining the distribution of samples according to their scores in the principal component space. In this way, four studies were carried out: (1) study of sediments collected during the dry season; (2) study of sediments collected during the rainy season; (3) comparative study between sediments from rainy and dry season; and (4) study of water composition collected during rainy season. From the results of the performed analyses, it can be concluded that metals distribution pattern reflected natural and anthropogenic backgrounds (e.g., sediments from the lagoon, situated at the beginning of the rain channel, presented high contents of Zn and Cu, perhaps related to anthropogenic activities or the influence of igneous sediments).     

A parametric study of stability and resonances around L 4 in the elliptic restricted three-body problem

The size of the stable region around the Lagrangian point L ₄ in the elliptic restricted three-body problem is determined by numerical integration as a function of the mass parameter and eccentricity of the primaries. The size distribution of the stable regions in the mass parameter-eccentricity plane shows minima at certain places that are identified with resonances between the librational frequencies of motions around L ₄. These are computed from an approximate analytical equation of Rabe relating the frequency, mass parameter and eccentricity. Solutions of this equation are determined numerically and the global behaviour of the frequencies depending on the mass parameter and eccentricity is shown and discussed. The minimum sizes of the stable regions around L ₄ change along the resonances and the relative strength of the resonances is analysed. Applications to possible Trojan exoplanets are indicated. Escape from L ₄ is also investigated.     

Temperature-time dependence of the electrical conductivity of garnets

aam mam uu mn¶rt;muaamuu n¶rt; u u nua ua —aam auumu m mnam (200–1000°, ₂ 10^–1 a). aa¶rt;u, m um na¶rt;a uu a n¶rt;u auumu mn¶rt;mu m mnam, u¶rt;m auumu ¶rt;a mn¶rt;mu mnam u n¶rt;m mu mnam uma.     

Morphology of the Wadati-Benioff zone,andesitic volcanism,and active fracture zones in Central America

Summary The morphology of the Wadati-Benioff zone in the region of Central America, based on the distribution of 1377 earthquake foci, verified the existence of an intermediate aseismic gap and its relation to active andesitic volcanism, and the non-uniformity of subduction due to the hampering effect of the main structural features of the subducting Cocos plate. Four deep seismically active fracture zones, genetically connected with the process of subduction, and three fracture zones manifesting the possible boundary between the Americas and Caribbean plates were identified in the continental wedge.     

Micromechanical approach to effective viscoelastic properties of micro‐fractured geomaterials

The aim of this paper is to formulate a micromechanics‐based approach to non‐aging viscoelastic behavior of materials with randomly distributed micro‐fractures. Unlike cracks, fractures are discontinuities that are able to transfer stresses and can therefore be regarded from a mechanical viewpoint as interfaces endowed with a specific behavior under normal and shear loading. Making use of the elastic‐viscoelastic correspondence principle together with a Mori‐Tanka homogenization scheme, the effective viscoelastic behavior is assessed from properties of the material constituents and damage parameters related to density and size of fractures. It is notably shown that the homogenized behavior thus formulated can be described in most cases by means of a generalized Maxwell rheological model. For practical implementation in structural analyses, an approximate model for the isotropic homogenized fractured medium is formulated within the class of Burger models. Although the approximation is basically developed for short‐term and long‐term behaviors, numerical applications indicate that the approximate Burger model accurately reproduce the homogenized viscoelastic behavior also in the transient conditions.     

Histogram and variogram inference in the multigaussian model

Several iterative algorithms are proposed to improve the histogram and variogram inference in the framework of the multigaussian model. The starting point is the variogram obtained after a traditional normal score transform. The subsequent step consists in simulating many sets of gaussian values with this variogram at the data locations, so that the ranking of the original values is honored. The expected gaussian transformation and the expected variogram are computed by an averaging operation over the simulated datasets. The variogram model is then updated and the procedure is repeated until convergence. Such an iterative algorithm can adapt to the case of tied data and despike the histogram. Two additional issues are also examined, referred to the modeling of the empirical transformation function and to the optimal pair weighting when computing the sample variogram.     

Density,porosity, mineralogy,and internal structure of cosmic dust and alteration of its properties during high‐velocity atmospheric entry

X‐ray microtomography (XMT), X‐ray diffraction (XRD), and magnetic hysteresis measurements were used to determine micrometeorite internal structure, mineralogy, crystallography, and physical properties at μm resolution. The study samples include unmelted, partially melted (scoriaceous), and completely melted (cosmic spherules) micrometeorites. This variety not only allows comparison of the mineralogy and porosity of these three micrometeorite types but also reveals changes in meteoroid properties during atmospheric entry at various velocities. At low entry velocities, meteoroids do not melt and their physical properties do not change. The porosity of unmelted micrometeorites varies considerably (0–12%) with one friable example having porosity around 50%. At higher velocities, the range of meteoroid porosity narrows, but average porosity increases (to 16–27%) due to volatile evaporation and partial melting (scoriaceous phase). Metal distribution seems to be mostly unaffected at this stage. At even higher entry velocities, complete melting follows the scoriaceous phase. Complete melting is accompanied by metal oxidation and redistribution, loss of porosity (1 ± 1%), and narrowing of the bulk (3.2 ± 0.5 g cm^?3) and grain (3.3 ± 0.5 g cm^?3) density range. Melted cosmic spherules with a barred olivine structure show an oriented crystallographic structure, whereas other subtypes do not.     

A multi‐dimensional analysis of the impacts of the Mahatma Gandhi National Rural Employment Guarantee Scheme: A tale from Tamil Nadu

This paper provides a multi‐dimensional analysis of the impacts of the Indian Mahatma Gandhi National Rural Employment Guarantee Scheme using a case study from rural Tamil Nadu. Drawing on structured interviews in households and semi‐structured interviews with local employers and officials, we analyse the effects of the workfare scheme when it is widely and properly implemented. We distinguish between different conceptualizations of the work scheme as a means of welfare provision, labour market policy and intervention directed towards other objectives. We found that the goals of the scheme were fulfilled unevenly in the given context. Among other findings, we show that positive effects on the welfare of participating and non‐participating households were accompanied by adverse effects on the local economy and negligible impact on out‐migration for work.     

Assessment of three temperature reconstruction methods in the virtual reality of a climate simulation

The performance of statistical climate reconstruction methods in the pre-instrumental period is uncertain, as they are calibrated in a short instrumental period but applied to much longer reconstructions time spans. Here, the virtual reality created by a climate simulation of the past millennium with the model ECHO-G is used as a test bed of three methods to reconstruct the annual Northern Hemisphere temperature. The methods are Composite plus Scaling, the inverse regression method of Mann et al. (Nature 392:779–787, 1998) and a direct principal-components regression method. The testing methodology is based on the construction of pseudo-proxies derived from the climate model output, the application of each of these methods to pseudo-proxy timeseries, and the comparison of their result with the simulated mean temperature. Different structures of the noise have been used to construct pseudo-proxies, ranging from the simulated grid-point precipitation. Also, one sparse and one denser pseudo-proxy network, co-located with two real networks, have been considered. All three methods underestimate the simulated variations of the Northern Hemisphere temperature, but the Composite plus Scaling method clearly displays a better performance and is robust against the different noise models and network size. The most relevant factor determining the skill of the reconstruction appears to be the network size, whereas the different noise models tend to yield similar results.