Decline of Pseudodiaptomus hessei (Copepoda, Calanoida) in two water bodies located in the Senegal River hydrosystem (West Africa): Hypotheses and perspectives

Pseudodiaptomus hessei is a key species in many water bodies in the Senegal River hydrosystem but it became rare or completely disappeared from two ecosystems (Lake Guiers and Dakar Bango Reservoir; Senegal, West Africa) after major hydrological changes caused by human action, mainly impoundments on the river in 1985, and the opening of a new estuary mouth in 2003. Kâ et al. [Kâ, S., Pagano, M., Ba, N., Bouvy, M., Leboulanger, C., Arfi, R., Thiaw, O.T., Ndour, E.H.M., Corbin, D., Defaye, D., Cuoc, C., Kouassi, E., 2006. Zooplankton distribution related to environmental factors and phytoplankton in a shallow tropical lake (Lake Guiers, Senegal, West Africa). International Review of Hydrobiology 91(5), 389–405] put forward several hypotheses to explain the reasons for this decline: salinity and chemical changes in the water, predation by a cyclopid predator Mesocyclops ogunnus and/or the inhibiting effects of cyanobacteria and/or diatoms (allelopathy). This study assessed these hypotheses by studying the distribution of P. hessei in 13 stations (including the Dakar Bango reservoir and Lake Guiers) in relation to physical, chemical and biological (phyto- and zooplanktons) factors at each station. We produced a distribution pattern for this species in the Senegal River hydrosystem. Rank correlations and principal component analysis showed that P. hessei was not correlated with conductivity but was positively correlated with pH and alkalinity, suggesting chemical effects. The clear association with two filamentous cyanobacteria (Cylindrospermopsis raciborskii and Anabaena sp.) did not appear to support the hypothesis of cyanobacteria inhibition but blooming conditions were never encountered during the study. Negative correlation with diatoms (especially with Fragilaria sp.) suggested that aldehyde producing diatoms had a negative effect. Negative correlations with cyclopids such as Mesocyclops supported the hypothesis of cyclopid predation to explain the decline of P. hessei. This study proposes several lines of research for future studies to test these hypotheses.     

Experimental constraints on ultrapotassic magmatism from the Bohemian Massif (durbachite series, Czech Republic)

The equilibrium phase relations of a mafic durbachite (53 wt.% SiO₂) from the Třebíč pluton, representative of the Variscan ultrapotassic magmatism of the Bohemian Massif (338–335 Ma), have been determined as a function of temperature (900–1,100°C), pressure (100–200 MPa), and H₂O activity (1.1–6.1 wt.% H₂O in the melt). Two oxygen fugacity ranges were investigated: close to the Ni–NiO (NNO) buffer and 2.6 log unit above NNO buffer (∆NNO + 2.6). At 1,100°C, olivine is the liquidus phase and co-crystallized with phlogopite and augite at 1,000°C for the whole range of investigated pressure and water content in the melt. At 900°C, the mineral assemblage consists of augite and phlogopite, whereas olivine is not stable. The stability field of both alkali feldspar and plagioclase is restricted to low pressure (100 MPa) at nearly water-saturated conditions (<3–4 wt.% H₂O) and T < 900°C. A comparison between experimental products and natural minerals indicates that mafic durbachites have a near-liquidus assemblage of olivine, augite, Ti-rich phlogopite, apatite and zircon, followed by alkali feldspar and plagioclase, similar to the mineral assemblage of minette magma. Natural amphibole, diopside and orthopyroxene were not reproduced experimentally and probably result from sub-solidus reactions, whereas biotite re-equilibrated at low temperature. The crystallization sequence olivine followed by phlogopite and augite reproduces the sequence inferred in many mica-lamprophyre rocks. The similar fractionation trends observed for durbachites and minettes indicate that mafic durbachites are probably the plutonic equivalents of minettes and that K- and Mg-rich magmas in the Bohemian Massif may have been generated from partial melting of a phlogopite–clinopyroxene-bearing metasomatized peridotite. Experimental melt compositions also suggest that felsic durbachites can be generated by simple fractionation of a more mafic parent and mixing with mantle-derived components at mid crustal pressures.     

Formation rates of Subantarctic mode water and Antarctic intermediate water within the South Pacific

The formation of Subantarctic Mode Water (SAMW) and Antarctic Intermediate Water (AAIW) significantly contributes to the total uptake and storage of anthropogenic gases, such as CO₂ and chlorofluorocarbons (CFCs), within the world's oceans. SAMW and AAIW formation rates in the South Pacific are quantified based on CFC-12 inventories using hydrographic data from WOCE, CLIVAR, and data collected in the austral winter of 2005. This study documents the first wintertime observations of CFC-11 and CFC-12 saturations with respect to the 2005 atmosphere in the formation region of the southeast Pacific for SAMW and AAIW. SAMW is 94% and 95% saturated for CFC-11 and CFC-12, respectively, and AAIW is 60% saturated for both CFC-11 and CFC-12. SAMW is defined from the Subantarctic Front to the equator between potential densities 26.80-27.06 kg m⁻³, and AAIW is defined from the Polar Front to 20°N between potential densities 27.06-27.40 kg m⁻³. CFC-12 inventories are 16.0×10⁶ moles for SAMW and 8.7×10⁶ moles for AAIW, corresponding to formation rates of 7.3±2.1 Sv for SAMW and 5.8±1.7 Sv for AAIW circulating within the South Pacific. Inter-ocean transports of SAMW from the South Pacific to the South Atlantic are estimated to be 4.4±0.6 Sv. Thus, the total formation of SAMW in the South Pacific is approximately 11.7±2.2 Sv. These formation rates represent the average formation rates over the major period of CFC input, from 1970 to 2005. The CFC-12 inventory maps provide direct evidence for two areas of formation of SAMW, one in the southeast Pacific and one in the central Pacific. Furthermore, eddies in the central Pacific containing high CFC concentrations may contribute to SAMW and to a lesser extent AAIW formation. These CFC-derived rates provide a baseline with which to compare past and future formation rates of SAMW and AAIW.     

Optical and X-Ray Observations of the Symbiotic System Ag Draconis During Quiescence and Outburst

We review the main characteristics of the symbiotic system AG Draconis, with special emphasis on its optical and X-ray variations. We also discuss the X-ray to visual energy distribution during quiescence and outburst and describe our spectroscopic and X-ray observations during the 2003 outburst. Based on X-ray observations collected with the XMM–Newton Observatory, on INES data from the IUE satellite, and on optical spectra collected with the Asiago–Cima Ekar, Bologna–Loiano and La Palma–Galileo Italian telescopes.     

Speciation of volatile arsenic at geothermal features in Yellowstone National Park

Geothermal features in the Yellowstone National Park contain up to several milligram per liter of aqueous arsenic. Part of this arsenic is volatilized and released into the atmosphere. Total volatile arsenic concentrations of 0.5-200 mg/m³ at the surface of the hot springs were found to exceed the previously assumed nanogram per cubic meter range of background concentrations by orders of magnitude. Speciation of the volatile arsenic was performed using solid-phase micro-extraction fibers with analysis by GC-MS. The arsenic species most frequently identified in the samples is (CH₃)₂AsCl, followed by (CH₃)₃As, (CH₃)₂AsSCH₃, and CH₃AsCl₂ in decreasing order of frequency. This report contains the first documented occurrence of chloro- and thioarsines in a natural environment. Toxicity, mobility, and degradation products are unknown.     

西昆仑北缘钾镁煌斑岩及超镁铁岩地质特征

产于塔里木地台铁克力克隆起内的钾镁煌夺岩石化学成分与亚洲钾煌斑岩的平均岩这成分接近,与澳大利亚西后利地区钾镁煌斑岩一致。稀土元素、微量元素组成与世界已 知钾镁煌斑岩具有相同特征。铁克力克隆起南缘柯岗－塔伦深断裂南阔绰人串珠状分布的超镁铁岩体,与钾镁煌斑岩具有相同的地质背景。该深断裂与西昆仑北缘深断裂交汇处是寻找含矿钾镁煌斑岩的有利部位。     

Bulk-rock geochemistry and plagioclase zoning in lavas exposed along the northern flank of the Western Blanco Depression (Northeast Pacific): Insight into open-system magma chamber processes

The present study is based on a set of lavas and crosscutting dikes collected by dives along detailed vertical transects on the northern flank of the western part of the Blanco Transform Fault, Northeast Pacific. The studied area consists of a small basin, the Western Blanco Depression (WBD), extending from the southern end of the Juan de Fuca ridge to a pseudofault trace 60 km eastward. The Northern Scarp of the WBD comprises a volcanic unit overlying a sheeted-dike complex. Major and trace element data, coupled with Sr–Nd isotope ratios, reveal a two-component mantle source, composed by an isotopically depleted matrix variably veined by more enriched material. One chemical group (NS2), indistinguishable from the other Northern Scarp samples on the basis of trace element data, has an unusually depleted isotopic composition typical of a nearly pure mantle end-member. Some cogenetic samples of the Northern Scarp have been used to constrain the differentiation modalities. Anorthite and MgO content profiles in plagioclase xenocrysts and phenocrysts reveal (i) the existence of H₂O-bearing evolved melts in the mushy zones and (ii) the occurrence of mixing process between these melts and anhydrous mafic liquids. The hydration is supported by other petrographic features such as high magmatic fO₂ values, calculated from Fe–Ti oxide pairs, and the presence of pyroxene inclusions in plagioclase phenocrysts. Mixing, consistent with the existence of Ni-rich ferrobasalts, is interpreted to be the consequence of the reservoir refilling by mafic liquids (Mg# = 70). These petrological and geochemical evidences are combined with the evolution of Mg# with depth to suggest a periodic open-system magma chamber evolution beneath the southern end of the Juan de Fuca ridge.     

Assessment of coastal flooding hazard along the Emilia Romagna littoral,IT

Aim of this paper is to develop simple tools for mapping — at regional and local scale — coastal areas exposed at flooding risk. A two-step simplified procedure for coastal management purposes is presented and is applied to Emilia Romagna (Italy), whose low and sandy coast faces the relatively mild Northern Adriatic Sea. The procedure is composed by a 1D conceptual model to determine flooding probability along wide coastal stretches and by a more detailed 2D Level II reliability method, that provides local quantitative statistical maps of inland flooding propagation. Qualitative maps obtained by literature approaches and quantitative results of flooding probability along the littoral show a good agreement. A coastal flood state indicator is proposed to rapidly assess coastal hazard.     

Investigating mesoscale eddy characteristics in the Luzon Strait region using altimetry

Ocean Dynamics - The circulation in the northern South China Sea (SCS) strongly responds to anticyclonic eddies that shed from the Kuroshio intruding across Luzon Strait. An eddy tracking algorithm...     

Modelling of local velocity anomalies: a cookbook

The determination of small-scale velocity anomalies (from tens to a few hundreds of metres) is a major problem in seismic exploration. The impact of such anomalies on a structural interpretation can be dramatic and conventional techniques such as tomographic inversion or migration velocity analysis are powerless to resolve the ambiguity between structural and velocity origins of anomalies. We propose an alternative approach based on stochastic modelling of numerous anomalies until a set of models is found which can explain the real data. This technique attempts to include as much a priori geological information as possible. It aims at providing the interpreter with a set of velocity anomalies which could possibly be responsible for the structural response. The interpreter can then choose one or several preferred models and pursue a more sophisticated analysis. The class of retained models are all equivalent in terms of data and therefore represent the uncertainty in the model space. The procedure emulates the real processing sequence using a simplified scheme. Essentially, the technique consists of five steps: 1 Interpretation of a structural anomaly in terms of a velocity anomaly with its possible variations in terms of position, size and amplitude. 2 Drawing a model by choosing the parameters of the anomaly within the acceptable range. 3 Modelling the traveltimes in this model and producing the imaging of the reflected interface. 4 Comparing the synthetic data with the real data and keeping the model if it lies within the data uncertainty range. 5 Iterate from step 2. In order to avoid the high computational cost inherent in using statistical determinations, simplistic assumptions have been made: ? The anomaly is embedded in a homogeneous medium: we assume that the refraction and the time shift due to the anomaly have a first-order effect compared with ray bending in the intermediate layers. ? We model only the zero-offset rays and therefore we restrict ourselves to structural problems. ? We simulate time migration and so address only models of limited structural complexity. These approximations are justified in a synthetic model which includes strong lateral velocity variations, by comparing the result of a full processing sequence (prestack modelling, stack and depth migration) with the simplified processing. This model is then used in a blind test on the inversion scheme.