Sediments of lakes Rotoroa and Rotoiti,South Island,New Zealand

The chemistry and mineralogy of the sediments of Lakes Rotoroa and Rotoiti, South Island, New Zealand (41° 51 S, 172° 38 E and 41° 50 S, 172° 50 E respectively) , were studied. In general, the cation exchange properties, element concentrations, and mineral compositions of the sediments show little variation between samples from each lake. However, some nutrient concentrations, notably exchangeable calcium, magnesium, and potassium, and total nitrogen and sulphur, are higher in sediments from weed beds than in sediments underlying deeper water; iron and manganese concentrations tend to show the opposite trend. Concentrations of exchangeable calcium and total nitrogen, sulphur, manganese, and iron generally decrease down the sediment profiles from the sediment/water interface. Differences between lakes, notably higher concentrations of illite and of the elements potassium, aluminium, titanium, and zirconium, and lower concentrations of calcium in the sediments of Lake Rotoiti than in those from Lake Rotoroa, are probably due mainly to the different geological settings rather than to differences in the diagenetic processes operating within the lakes. Mineralogical analyses indicate that the lake sediments are derived mainly from the valleys of the major inflow rivers rather than from the slopes at the sides of each lake.     

Impacts of a bivalve mass mortality event on an estuarine food web and bivalve grazing pressure

Declines in bivalve populations have been quite common worldwide, often associated with coastal development, pollution and climate change. In addition to the impacts of these chronic stressors, occasional mass mortality events may have severe consequences on ecosystem services and biodiversity. In this study, we examined the impact of a mass mortality event of the clam (Austrovenus stutchburyi) on an estuarine food web and the grazing pressure exerted by the bivalve population. In February 2009, c. 60% of the clam population died in Whangateau Harbour, New Zealand. Population clearance rate calculations suggest that the clam population do not exert significant top-down control on phytoplankton biomass in the estuary, and thus the impact of the mortality event on bivalve grazing pressure was less severe than the reduction in abundance would suggest. A trophic model shows that phytoplankton play a limited role in the estuary food web, which is instead dominated by microphytobenthos and clams. This study highlights the importance of microphytobenthos in shallow estuaries, and the application of the trophic model is a useful tool that can identify key components of the ecosystem and could help inform monitoring programmes.     

Reflection on the first five years of South Africa’s Acoustic Tracking Array Platform (ATAP): status,challenges and opportunities

The Acoustic Tracking Array Platform (ATAP) is a marine science programme that monitors the movements and migrations of inshore marine animals along the South African coastline. Acoustically tagged animals are monitored by an expanded network of approximately 100 automated data-logging acoustic receivers moored at strategic node sites, from Cape Point in the west to the South Africa–Mozambique border in the east. During five years since its inception, in 2011, the ATAP has achieved outstanding progress in terms of the numbers of animals and the variety of species tagged. To date, the ATAP has yielded over 2.6 million detections from more than 700 acoustically tagged animals, representing 27 different species from 20 families, including the African penguin Spheniscus demersus, fishery-at-risk species (e.g. dusky kob Argyrosomus japonicus) and iconic elasmobranchs (e.g. white shark Carcharodon carcharias). Following a period of considerable equipment loss in 2014, refinement of the receiver network was required and the deeper receivers at each site were decommissioned without influencing the integrity of the nationwide array. The platform, managed by the South African Institute for Aquatic Biodiversity, ultimately represents a low-cost method of collecting long-term data that currently benefits approximately 25 researchers from 14 organisations. Case studies are presented to expose the opportunities provided by the ATAP, which will undoubtedly yield new discoveries and provide a greater understanding of the movement patterns and migrations of a wide variety of inshore marine and estuary-associated species.     

Growth of vertically segmented normal faults

The geometry and evolution of vertically segmented normal faults, with dip separations of < ca 11.5 m have been studied in a coastal outcrop of finely bedded Cretaceous chalk at Flamborough Head, U.K. Fault trace segments are separated by both contractional and extensional offsets which have step, overlap or bend geometries. The location of fault trace offsets is strongly controlled by lithology occurring at either thin (ca 1 mm-8 cm) and mechanically weak marl layers or partings between chalk units. Fault segmentation occurred during either fault nucleation within, or propagation through, the strongly anisotropic lithological sequence. An inverse relationship between fault displacement and number of offsets per length of fault trace reflects the progressive destruction of offsets during fault growth. The preservation of fault offsets is therefore dependent on offset width and fault displacement. Fault rock, comprising gouge and chalk breccia, may vary in thickness by 1.5–2.0 orders of magnitude on individual fault traces. Strongly heterogeneous fault rock distributions are most common on small faults (< 10 cm displacement) and are produced mainly by destruction of fault offsets. Shearing of fault rock with increasing displacement gives rise to a more homogeneous fault rock distribution on large faults at the outcrop scale.     

Ergebnisse präzisionsgravimetrischer Messungen auf einer WE-Linie in der DDR 1977

Summary Results of gravity measurements performed in 1977 along a WE-profile situated in the GDR area are discussed. Systematic influences caused by the variations of the hydrologic conditions in the local regions of the observation points reach 100 nm s^–2. From the results of the yearly repeated gravity measurements (1970/77) a mean yearly gravity variation of about 20 nm s^–2 a^–1 was calculated for the sedimentary eastern part of the profile.     

Temporal change of C-isotope signatures and methanogenic pathways in rice field soil incubated anoxically at different temperatures

Production of CH₄ and CO₂ was quantified in anoxically incubated soil samples taken from an Italian rice field. The rates increased with temperature between 10 and 37°C. The δ¹³C of the accumulated CO₂, CH₄ and acetate changed with time in a systematic way. The data were used in mass balance equations to constrain isotopic fractionation factors and pathways of CH₄ production. The calculations were further constrained by the determination of ¹⁴CH₄ production from ¹⁴CO₂ at steady state. At 50°C, CH₄ was exclusively produced from CO₂, indicating a fractionation factor of α_CO2/CH4 = 1.073. Between 10 and 37°C, the results showed a temporal change in the methanogenic pathway. A relatively high (40-60%) CO₂-derived fraction of CH₄ production in the beginning was followed by a phase in which contribution of CO₂-derived CH₄ decreased to low (<15%) values, and ultimately by the steady state phase in which values increased to <40% (the theoretically expected value). The rate of change from one phase to the next increased with temperature. Incubation temperature had a strong effect on the overall fractionation of ¹³C during the formation and consumption of acetate, with stronger fractionation at low than at high temperature. The results further showed that, especially at low temperatures, fractionation occurred during acetate turnover and acetoclastic methanogenesis, despite the fact that steady-state conditions caused (apparent) substrate-limitation.     

High-resolution numerical simulations of Hurricane Isabel (2003) over North Carolina

Two numerical simulations were performed to study the ability of a high-resolution mesoscale model to predict the track and structure of Hurricane Isabel over North Carolina. One simulation (Control) used standard NCEP climatologically-based sea surface temperature (SST) data for the lower boundary condition while another simulation (Experimental) prescribed real-time high-resolution SST data for the lower boundary. Results from this study show that both simulations predict the track of Isabel over North Carolina reasonably well, although the track predicted by the experimental simulation agrees more closely with observations. The experimental simulation more closely agrees with observations of the intensity of Isabel and the amount and spatial distribution of precipitation. These results reinforce the importance of accurate high-resolution SST data on numerical simulations of tropical cyclones.     

Thermal–mechanical modeling of cooling history and fracture development in inflationary basalt lava flows

Thermal–mechanical analyses of isotherms in low-volume basalt flows having a range of aspect ratios agree with inferred isotherm patterns deduced from cooling fracture patterns in field examples on the eastern Snake River Plain, Idaho, and highlight the caveats of analytical models of sheet flow cooling when considering low-volume flows. Our field observations show that low-volume lava flows have low aspect ratios (width divided by thickness), typically < 5. Four fracture types typically develop: column-bounding, column-normal, entablature (all of which are cooling fractures), and inflation fractures. Cooling fractures provide a proxy for isotherms during cooling and produce patterns that are strongly influenced by flow aspect ratio. Inflation fractures are induced by lava pressure-driven inflationary events and introduce a thermal perturbation to the flow interior that is clearly evidenced by fracture patterns around them. Inflation fracture growth occurs incrementally due to blunting of the lower tip within viscoelastic basalt, allowing the inflation fracture to pivot open. The final stage of growth involves propagation beyond the blunted tip towards the stress concentration at the tapered tip of a lava core, resulting in penetration of the core that causes quenching of the lava and the formation of a densely fractured entablature. We present numerical models that include the effects of inflation fractures on lava cooling and which support field-based inferences that inflation fractures depress the isotherms in the vicinity of the fracture, cause a subdivision of the lava core, control the location of the final portion of the lava flow to solidify, and cause significant changes in the local cooling fracture orientations. In addition to perturbing isotherms, inflation fractures cause a lava flow to completely solidify in a shorter amount of time than an identically shaped flow that does not contain an inflation fracture.     

Evolution and petroleum geology of Amlia and Amukta intra-arc summit basins, Aleutian Ridge

Amlia and Amukta Basins are the largest of many intra-arc basins formed in late Cenozoic time along the crest of the Aleutian Arc. Both basins are grabens filled with 2–5 km of arc-derived sediment. A complex system of normal faults deformed the basinal strata. Although initial deposits of late Micocene age may be non-marine in origin, by early Pliocene time, most of the basinfill consisted of pelagic and hemipelagic debris and terrigenous turbidite deposits derived from wavebase and subaerial erosion of the arc's crestal areas. Late Cenozoic volcanism along the arc commenced during or shortly after initial subsidence and greatly contributed to active deposition in Amlia and Amukta Basins.Two groups of normal faults occur: major boundary faults common to both basins and ‘intra-basin’ faults that arise primarily from arc-parallel extension of the arc. The most significant boundary fault, Amlia-Amukta fault, is a south-dipping growth fault striking parallel to the trend of the arc. Displacement across this fault forms a large half-graben that is separated into the two depocentres of Amlia and Amukta Basins by the formation of a late Cenozoic volcanic centre, Seguam Island. Faults of the second group reflect regional deformation of the arc and offset the basement floor as well as the overlying basinal section. Intra-basin faults in Amlia Basin are predominantly aligned normal to the trend of the arc, thereby indicating arc-parallel extension. Those in Amukta basin are aligned in multiple orientations and probably indicate a more complex mechanism of faulting. Displacement across intra-basin faults is attributed to tectonic subsidence of the massif, aided by depositional loading within the basins. In addition, most intra-basin faults are listric and are associated with high growth rates.Although, the hydrocarbon potential of Amlia and Amukta Basins is difficult to assess based on existing data, regional considerations imply that an adequate thermal history conducive to hydrocarbon generation has prevailed during the past 6-5 my. The possibility for source rocks existing in the lower sections of the basins is suggested by exposures of middle and upper Miocene carbonaceous mudstone on nearby Atka Island and the implication that euxinic conditions may have prevailed during the initial formation of the basins. Large structures have evolved to trap migrating hydrocarbons, but questions remain concerning the preservation of primary porosity in a sedimentary section rich in reactive volcaniclastic debris.