Characterization of pre-failure deformation and evolution of a large earthflow using InSAR monitoring and optical image interpretation

Landslides - At 6pm on July 19, 2019, the Yahuokou earthflow (Zhouqu County, Gansu Province, China) was reactivated following a period of intense rainfall. A volume of approximately...     

Metamorphism and kinematics of the early deformation in the Variscan suture of SW Iberia

The early (Devonian) collisional stage in SW Iberia has been investigated through the analysis of deformation in the Cubito‐Moura schists, the main lithology of an Allochthonous Complex putatively rooted in the suture between the Ossa‐Morena and South Portuguese zones. The first deformation in these schists (D₁) is recorded as a S₁‐L₁ mylonitic fabric well preserved in early quartz veins. Subsequent D₂ deformation caused the main folds and the main (S₂) foliation. After restoration, the stretching lineation (L₁) trends at a small angle with the Ossa‐Morena/South Portuguese suture. This trend, together with the top‐to‐the‐east kinematics determined from quartz microfabric is indicative of an oblique left‐lateral collisional scenario in SW Iberia. Chlorite–white K‐mica–quartz ± chloritoid multi‐equilibrium calculations yield P–T conditions in the range 0.9–1.2 GPa and 300–400 °C, during the first collisional stage. P–T conditions during D₂ were 0.3–0.8 GPa and 400–450 °C, thus indicating an important stage of exhumation of the Allochthonous Complex during these two collisional events, after subduction of the Ossa‐Morena Zone margin under the South Portuguese Zone continental crust. In the general context of the Variscan orogen, dominated by dextral collision, the left‐lateral convergence in SW Iberia can be explained in terms of the Avalonian salient represented by the South Portuguese Zone, which would impinge between Iberia and Morocco.     

Formation of a stratified subglacial ‘till’ assemblage by ice‐marginal thrusting and glacier overriding

Ó Cofaigh, C., Evans, D. J. A. & Hiemstra, J. F. 2010: Formation of a stratified subglacial ‘till’ assemblage by ice‐marginal thrusting and glacier overriding. Boreas, 10.1111/j.1502‐3885.2010.00177.x. ISSN 0300‐9483. A thick sequence of glaciotectonically stacked till and outwash is preserved in a coastal embayment at Feohanagh, southwest Ireland. The sequence contains a variety of diamicton lithofacies, including laminated, stratified and massive components, but stratified diamictons dominate. Stratification/lamination is imparted by the presence of numerous closely spaced subhorizontal and anastomosing partings, which give a fissile appearance to the diamictons. Many partings are the result of sandy or thin gravelly layers within the diamictons. Some diamictons contain interbeds and lenses of sand, mud and gravel, which still preserve the original stratification. The sequence at Feohanagh is the product of a two‐stage depositional process in which initial glaciolacustrine sedimentation in an ice‐dammed lake was followed by glaciotectonic thrusting and overriding, during which the lake sediments were reworked and variably deformed. Similar late Quaternary sequences of glaciotectonically stacked stratified sediments and till have been described from around the coastal margins of Ireland and Britain, where they constitute glaciotectonite–subglacial traction till continuums rather than true lodgement tills as traditionally implied. Thick stratified diamicton assemblages are likely to occur in areas where steep topography provides pinning points for the glacier margin to stabilize and deliver large volumes of sediment into a glaciolacustrine or glaciomarine setting before proglacial and subglacial reworking of the sediment pile. The resulting geological–climatic unit, often defined as ‘till’, will contain a large amount of stratified and variably deformed material (laminated and stratified diamictons will be common), including intact sediment rafts, reflecting low strain rates and short sediment transport distances.     

The mixed-bed glacial landform imprint of the North Sea Lobe in the western North Sea

During the last glacial cycle an intriguing feature of the British-Irish Ice Sheet was the North Sea Lobe (NSL); fed from the Firth of Forth and which flowed south and parallel to the English east coast. The controls on the formation and behaviour of the NSL have long been debated, but in the southern North Sea recent work suggests the NSL formed a dynamic, oscillating terrestrial margin operating over a deforming bed. Further north, however, little is known of the behaviour of the NSL or under what conditions it operated. This paper analyses new acoustic, sedimentary and geomorphic data in order to evaluate the glacial landsystem imprint and deglacial history of the NSL offshore from NE England. Subglacial tills (AF2/3) form a discontinuous mosaic interspersed with bedrock outcrops across the seafloor, with the partial excavation and advection of subglacial sediment during both advance and retreat producing mega-scale glacial lineations and grounding zone wedges. The resultant ‘mixed-bed’ glacial landsystem is the product of a dynamic switch from a terrestrial piedmont-lobe margin with a net surplus of sediment to a partially erosive, quasi-stable, marine-terminating, ice stream lobe as the NSL withdrew northwards. Glaciomarine sediments (AF4) drape the underlying subglacial mixed-bed imprint and point to a switch to tidewater conditions between 19.9 and 16.5 ka cal BP as the North Sea became inundated. The dominant controls on NSL recession during this period were changing ice flux through the Firth of Forth ice stream onset zone and water depths at the grounding line; the development of the mixed-bed landsystem being a response to grounding line instability. © 2018 John Wiley & Sons, Ltd.     

High-resolution X-ray fluorescence profiling of hybrid event beds: Implications for sediment gravity flow behaviour and deposit structure

Hybrid event beds form when turbidity currents that transport or locally acquire significant quantities of mud decelerate. The mud dampens turbulence driving flow transformations, allowing both mud and sand to settle into dense, near-bed fluid layers and debris flows. Quantifying details of the mud distribution vertically in what are often complex tiered deposits is critical to reconstructing flow processes and explaining the diverse bed types left by mud-bearing gravity flows. High-resolution X-ray fluorescence core scanning provides continuous vertical compositional profiles that can help to constrain mud distribution at sub-millimetre scale, offering a significant improvement over discrete sampling. The approach is applied here to cores acquired from the Pennsylvanian Ross Sandstone Formation, western Ireland, where a range of hybrid event beds have been identified. Raw X-ray fluorescence counts are calibrated against element concentrations and mineral abundances determined on coincident core plugs, with element and element log-ratios used as proxies to track vertical changes in abundances of quartz, illite (including mica), chlorite and calcite cement. New insights include ‘stepped’ (to higher values) as opposed to ‘saw-tooth’ vertical changes in mud content and the presence of compositional banding that would otherwise be overlooked. Hybrid event beds in basin floor sheets that arrived ahead of the prograding fan system have significantly cleaner sandy components than those in mid-fan lobes. The latter may imply that the heads of the currents emerging from mid-fan channels entrained significant mud immediately before they collapsed. Many of the H3 debrites are bipartite with a sandier H3a division attributed to re-entrainment and mixing of a trailing debris or fluid mud flow (H3b) with sand left by the forward part of the flow. Hybrid event bed structure may thus partly reflect substrate interaction and mixing during deposition, and the texture of the bed divisions may not simply mirror those in the suspensions from which they formed.     

Site Response as a Function of Near-Surface Geology in the South Iceland Seismic Zone

Site response measurements provide information on the amplification of ground motions generated by local conditions. Recent studies of large destructive earthquakes have shown that damage during the earthquakes are often caused by the amplification of seismic waves in near-surface sedimentary layers. The estimation of site response is therefore critical, in order to evaluate the true seismic hazard potential of a given area. We investigated local site amplifications in the South Iceland Seismic Zone (SISZ). Nine digital seismographs were deployed, temporarily, in an area of approximately 400 km2, in the westernmost part of the SISZ. Among the 90 events recorded, 15 were used in this study, including a magnitude 3.1 (ML) event and selected aftershocks, which occurred in the northern outskirts of the village Hveragerdi. Single Station Spectral Ratios (SSSR) of the recorded earthquakes revealed some of the effects of local site conditions. Spectral amplification factors of 2–5 on average, can be expected in the SIL area, depending on the sediment type and thickness. Higher site amplifications occur in the southern part of the study region, where the thickest sedimentary cover is found. Spectral amplification, related to topographical effects, is observed at the bedrock reference station, Bjarnastadir. Standard Spectral Ratios (SSR), with respect to the bedrock reference station, Bjarnastadir, were also calculated for some stations, in order to compare the two spectral ratio results. The two methods show a good correlation at some stations, whereas at others they vary considerably. The comparison between the earthquake and ambient noise data, on the other hand, gave better correlation when the SSSR method is used.     

Variability of heat shock proteins and glutathione S-transferase in gill and digestive gland of blue mussel,Mytilus edulis

Glutathione S-transferase (GST) and heat shock proteins (hsps) 40, 60, 70 and 90 were determined by immunoblotting using actin as an internal control in Mytilus edulis from one station outside (site1) and three stations within (sites 2-4) Cork Harbour, Ireland. Comparisons were made between gill and digestive gland and between sites. Gill shows generally higher hsp 60, 70 and 90 while digestive gland has higher hsp 40. Site 1 showed higher gill hsps 40 and 70 than sites 2-4 while gill GST was higher in sites 3 and 4 than 1 and 2. Comparison with sites in the North Sea (site 5: outside Tj?rn? in The Koster archipelago in the Skagerack) and Baltic Sea (site 6: Ask? island) also revealed lower hsps 40 and 70 in site 6 (low salinity) than site 5 (high salinity) although hsps 60, 70 and 90 were detectable in digestive gland unlike sites 1-4. Previously, only hsp 70 had been studied at these sites [Mar. Environ. Res. 39. (1995), 181]. At the mRNA level, gill hsp 70 is 80-fold higher at Tj?rn? than Ask?. These data suggest that, while salinity may slightly decrease hsp 40 and 70, both hsp 70 and GST are selectively up-regulated by approx. 10- and 3-fold, respectively, at Tj?rn? compared to the other sites which we attribute to exposure to more widely fluctuating pollution levels.     

Aeolian sand sea development along the mid‐Cretaceous western Tethyan margin (Spain): erg sedimentology and palaeoclimate implications

The existence of a mid‐Cretaceous erg system along the western Tethyan margin (Iberian Basin, Spain) was recently demonstrated based on the occurrence of wind‐blown desert sands in coeval shallow marine deposits. Here, the first direct evidence of this mid‐Cretaceous erg in Europe is presented and the palaeoclimate and palaeoceanographic implications are discussed. The aeolian sand sea extended over an area of 4600 km². Compound crescentic dunes, linear draa and complex aeolian dunes, sand sheets, wet, dry and evaporitic interdunes, sabkha deposits and coeval extradune lagoonal deposits form the main architectural elements of this desert system that was located in a sub‐tropical arid belt along the western Tethyan margin. Sub‐critically climbing translatent strata, grain flow and grain fall deposits, pin‐stripe lamination, lee side dune wind ripples, soft‐sediment deformations, vertebrate tracks, biogenic traces, tubes and wood fragments are some of the small‐scale structures and components observed in the aeolian dune sandstones. At the boundary between the aeolian sand sea and the marine realm, intertonguing of aeolian deposits and marine facies occurs. Massive sandstone units were laid down by mass flow events that reworked aeolian dune sands during flooding events. The cyclic occurrence of soft sediment deformation is ascribed to intermittent (marine) flooding of aeolian dunes and associated rise in the water table. The aeolian erg system developed in an active extensional tectonic setting that favoured its preservation. Because of the close proximity of the marine realm, the water table was high and contributed to the preservation of the aeolian facies. A sand‐drift surface marks the onset of aeolian dune construction and accumulation, whereby aeolian deposits cover an earlier succession of coastal coal deposits formed in a more humid period. A prominent aeolian super‐surface forms an angular unconformity that divides the aeolian succession into two erg sequences. This super‐surface formed in response to a major tectonic reactivation in the basin, and also marks the change in style of aeolian sedimentation from compound climbing crescentic dunes to aeolian draas. The location of the mid‐Cretaceous palaeoerg fits well to both the global distribution of other known Cretaceous erg systems and with current palaeoclimate data that suggest a global cooling period and a sea‐level lowstand during early mid‐Cretaceous times. The occurrence of a sub‐tropical coastal erg in the mid‐Cretaceous of Spain correlates with the exposure of carbonate platforms on the Arabian platform during much of the Late Aptian to Middle Albian, and is related to this eustatic sea‐level lowstand.