Probabilistic domain decomposition for the solution of the two-dimensional magnetotelluric problem

Probabilistic domain decomposition is proposed as a novel method for solving the two-dimensional Maxwell’s equations as used in the magnetotelluric method. The domain is split into non-overlapping sub-domains and the solution on the sub-domain boundaries is obtained by evaluating the stochastic form of the exact solution of Maxwell’s equations by a Monte-Carlo approach. These sub-domains can be naturally chosen by splitting the sub-surface domain into regions of constant (or at least continuous) conductivity. The solution over each sub-domain is obtained by solving Maxwell’s equations in the strong form. The sub-domain solver used for this purpose is a meshless method resting on radial basis function-based finite differences. The method is demonstrated by solving a number of classical magnetotelluric problems, including the quarter-space problem, the block-in-half-space problem and the triangle-in-half-space problem.     

Post-peak,fluid-mediated modification of granulite facies zircon and monazite in the Trivandrum Block,southern India

The quarry at Kottavattom in the Trivandrum Block of southern India contains spectacular examples of fluid-assisted alteration of high-grade metamorphic rocks. Garnet-biotite gneiss has undergone a change in mineral assemblage to form submetre scale orthopyroxene-bearing patches, later retrogressed to form an amphibole-bearing lithology. These patches, often referred to as arrested or incipient charnockite, crosscut the original metamorphic foliation and are typically attributed to passage of a low aH₂O fluid through the rock. Whilst this conversion is recognised as a late stage process, little detailed chronological work exists to link it temporally to metamorphism in the region. Zircon and monazite analysed from Kottavattom not only record metamorphism in the Trivandrum Block but also show internal, lobate textures crosscutting the original zoning, consistent with fluid-aided coupled dissolution-reprecipitation during formation of the orthopyroxene-bearing patches. High-grade metamorphism at the quarry occurred between the formation of metamorphic monazite at ~585 Ma and the growth of metamorphic zircon at ~523 Ma. The fluid-assisted alteration of the garnet-biotite gneiss is poorly recorded by altered zircon with only minimal resetting of the U–Pb system, whereas monazite has in some cases undergone complete U–Pb resetting and records an age for fluid infiltration at ~495 Ma. The fluid event therefore places the formation of the altered patches at least 25 Myr after the zircon crystallisation in the garnet-biotite gneiss. The most likely fluid composition causing the modification and U–Pb resetting of zircon and monazite is locally derived hypersaline brine.     

Periglacial trimlines,former nunataks and the altitude of the last ice sheet in Wester Ross,northwest Scotland

High-level weathering limits separating ice-scoured topography from frost-weathered detritus were identified on 28 mountains in Wester Ross at altitudes of 700–960 m, and a further 22 peaks support evidence of ice scouring to summit level. Weathering limits are defined most clearly on sandstone and gneiss, which have resisted frost shattering during the Late Devensian Lateglacial, but can also be distinguished on schists and quartzite. Schmidt hammer measurements and analyses of clay mineral assemblages indicate significantly more advanced rock and soil weathering above the weathering limits. The persistence of gibbsite above weathering limits indicates that they represent the upper limit of Late Devensian glacial erosion. The regular decline of weathering-limit altitudes along former flowlines eliminates the possibility that the weathering limits represent former thermal boundaries between protective cold-based and erosive warm-based ice. The weathering limits are therefore interpreted as periglacial trimlines that define the maximum surface altitude of the last ice sheet. Calculated basal shear stresses of 50–95 kPa are consistent with this interpretation. Reconstruction of ice-sheet configuration indicates that the former ice-shed lay above 900 m along the present watershed, and that the ice surface descended northwestwards, with broad depressions along major troughs and localised domes around independent centres of ice dispersal. Extrapolation of the ice surface gradient and altitude suggests that the ice sheet did not overrun the Outer Hebrides, but was confluent with the independent Outer Hebrides ice-cap in the North Minch basin. Erratics located up to 140 m above the reconstructed ice surface are inferred to have been emplaced by a pre-Late Devensian ice sheet (or ice sheets) of unknown age. © 1997 John Wiley & Sons, Ltd.     

Platinum and palladium mobility in supergene environment: The residual origin of the Pirogues River mineralization, New Caledonia

Eluvial concentration of platinum-group minerals (PGM) has developed in the south of New Caledonia, from the weathering of a mafic and ultramafic cumulate. The platinum/palladium (Pt/Pd) ratio evolution from the bottom to the top of the weathering profile indicates a chemical mobilization of Pd in supergene environment. The examination by scanning electron microscopy of the residual PGM collected in the weathering profile and their chemical characterization by electronic microprobe show a preservation of the structure and chemical signature (in the core of the grains) of the fresh PGM. This clearly demonstrates that the PGM studied here are residual and are affected by dissolution process.     

An experimental study of phase equilibria in the systems H2O–CO2–CaCl2 and H2O–CO2–NaCl at high pressures and temperatures (500–800?°C, 0.5–0.9?GPa): geological and geophysical applications

Phase equilibria in the ternary systems H₂O–CO₂–NaCl and H₂O–CO₂–CaCl₂ have been determined from the study of synthetic fluid inclusions in quartz at 500 and 800 °C, 0.5 and 0.9 GPa. The crystallographic control on rates of quartz overgrowth on synthetic quartz crystals was exploited to prevent trapping of fluid inclusions prior to attainment of run conditions. Two types of fluid inclusion were found with different density or CO₂ homogenisation temperature (T_h(CO₂)): a CO₂-rich phase with low T_h(CO₂), and a brine with relatively high T_h(CO₂). The density of CO₂ was calibrated using inclusions in the binary system H₂O–CO₂. Mass balance calculations constrain tie lines and the miscibility gap between brines and CO₂-rich fluids in the H₂O–CO₂–NaCl and H₂O–CO₂–CaCl₂ systems at 500 and 800 °C, and 0.5 and 0.9 GPa. The miscibility gap in the CaCl₂ system is larger than in the NaCl system, and solubilities of CO₂ are smaller. CaCl₂ demonstrates a larger salting-out effect than NaCl at the same P–T conditions. In ternary systems, homogeneous fluids are H₂O-rich and of extremely low salinity, but at medium to high concentrations of salts and non-polar gases fluids are unlikely to be homogeneous. The two-phase state of crustal fluids should be common. For low fluid-rock ratios the cation compositions of crustal fluids are buffered by major crustal minerals: feldspars and micas in pelites and granitic rocks, calcite (dolomite) in carbonates, and pyroxenes and amphiboles in metabasites. Fluids in pelitic and granitic rocks are Na-K rich, while for carbonate and metabasic rocks fluids are Ca-Mg-Fe rich. On lithological boundaries between silicate and carbonate rocks, or between pelites and metabasites, diffusive cation exchange of the salt components of the fluid will cause the surfaces of immiscibility to intersect, leading to unmixing in the fluid phase. Dispersion of acoustic energy at critical conditions of the fluid may amplify seismic reflections that result from different fluid densities on lithological boundaries.Editorial responsibility: I. Parsons     

Geochemistry of Archean shales from the Pilbara Supergroup,Western Australia

Archean clastic sedimentary rocks are well exposed in the Pilbara Block of Western Australia. Shales from turbidites in the Gorge Creek Group (ca. 3.4 Ae) and shales from the Whim Creek Group (ca. 2.7 Ae) have been examined. The Gorge Creek Group samples, characterized by muscovite-quartzchlorite mineralogy, are enriched in incompatible elements (K, Th, U, LREE) by factors of about two, when compared to younger Archean shales from the Yilgarn Block. Alkali and alkaline earth elements are depleted in a systematic fashion, according to size, when compared with an estimate of Archean upper crust abundances. This depletion is less notable in the Whim Creek Group. Such a pattern indicates the source of these rocks underwent a rather severe episode of weathering. The Gorge Creek Group also has fairly high B content (85 ± 29 ppm) which may indicate normal marine conditions during deposition.Rare earth element (REE) patterns for the Pilbara samples are characterized by light REE enrichment ($\text{La}{}_{\mathrm{N}}\text{Yb}{}_{\mathrm{N}}\text{≥ 7.5}$) and no or very slight Eu depletion ($\text{Eu}\text{Eu}{}^1\text{= 0.82 – 0.99}$). A source comprised of about 80% felsic igneous rocks without large negative Eu-anomalies (felsic volcanics, tonalites, trondhjemites) and 20% mafic-ultramafic volcanics is indicated by the trace element data. Very high abundances of Cr and Ni cannot be explained by any reasonable provenance model and a secondary enrichment process is called for.     

Rare earth element geochemistry of Archean metasedimentary rocks from Kambalda,Western Australia

Archean sedimentary rocks of very limited lateral extent from horizons within basaltic and ultramafic volcanic sequences at Kambalda, Western Australia, are extremely variable in major elements, LIL and ferromagnesian trace element compositions. The REE patterns are uniform and do not have negative Eu anomalies. Two samples have very low total REE abundances and positive Eu anomalies attributed to a very much greater proportion of chemically deposited siliceous material. Apart from these two samples, the Kambalda data are similar to REE abundances and patterns from Archean sedimentary rocks from Kalgoorlie, Western Australia and to average Archean sedimentary rock REE patterns. These show a fundamental distinction from post-Archean sedimentary rock REE patterns which have higher $\text{La}\text{Yb}$ ratios and a distinct negative Eu anomaly.     

Nickel speciation in Sebertia acuminata,a plant growing on a lateritic soil of New Caledonia

Nickel speciation in a nickel hyperaccumulating plant (Sebertia acuminata) and its associated soil of southern New Caledonia was studied using various analytical methods. The soil is formed of iron oxides (goethite, hematite), which contain almost all the nickel. The available nickel is probably linked to the organic matter in the litter. Sebertia acuminata, acts as a nickel pump, and concentrates the metal in its leaves. It partitions nickel and silica; nickel is concentrated in the cells (probably in the vacuoles) as organometallic complexes, whereas silica forms the framework of the cells, and the phytolithes. A thorough study of these plants seems essential in order to define the soil–plant relations, and to propose appropriate ways for ecological restoration. To cite this article: N. Perrier et al., C. R. Geoscience 336 (2004).