Plate tectonics and the fusion of Asia

The coincidence of orogenic belts containing zones of high pressure metamorphism, ophiolites and deepwater sediments with faunal province boundaries leads to the postulation of several sutural zones within Asia. About nine blocks are defined and it is suggested on the basis of palaeogeographical, palaeontological and tectonic evidence that Asia did not fuse completely until well into the Mesozoic.     

Velocities of compressional and shear waves in limestones

Carbonate rocks are important hydrocarbon reservoir rocks with complex textures and petrophysical properties (porosity and permeability) mainly resulting from various diagenetic processes (compaction, dissolution, precipitation, cementation, etc.). These complexities make prediction of reservoir characteristics (e.g. porosity and permeability) from their seismic properties very difficult. To explore the relationship between the seismic, petrophysical and geological properties, ultrasonic compressional‐ and shear‐wave velocity measurements were made under a simulated in situ condition of pressure (50 MPa hydrostatic effective pressure) at frequencies of approximately 0.85 MHz and 0.7 MHz, respectively, using a pulse‐echo method. The measurements were made both in vacuum‐dry and fully saturated conditions in oolitic limestones of the Great Oolite Formation of southern England. Some of the rocks were fully saturated with oil. The acoustic measurements were supplemented by porosity and permeability measurements, petrological and pore geometry studies of resin‐impregnated polished thin sections, X‐ray diffraction analyses and scanning electron microscope studies to investigate submicroscopic textures and micropores. It is shown that the compressional‐ and shear‐wave velocities (V_p and V_s, respectively) decrease with increasing porosity and that V_p decreases approximately twice as fast as V_s. The systematic differences in pore structures (e.g. the aspect ratio) of the limestones produce large residuals in the velocity versus porosity relationship. It is demonstrated that the velocity versus porosity relationship can be improved by removing the pore‐structure‐dependent variations from the residuals. The introduction of water into the pore space decreases the shear moduli of the rocks by about 2 GPa, suggesting that there exists a fluid/matrix interaction at grain contacts, which reduces the rigidity. The predicted Biot–Gassmann velocity values are greater than the measured velocity values due to the rock–fluid interaction. This is not accounted for in the Biot–Gassmann velocity models and velocity dispersion due to a local flow mechanism. The velocities predicted by the Raymer and time‐average relationships overestimated the measured velocities even more than the Biot model.     

The acoustic signature of fluid flow in complex porous media

Effective medium approximations for the frequency-dependent and complex-valued effective stiffness tensors of cracked/porous rocks with multiple solid constituents are developed on the basis of the T-matrix approach (based on integral equation methods for quasi-static composites), the elastic–viscoelastic correspondence principle, and a unified treatment of the local and global flow mechanisms, which is consistent with the principle of fluid mass conservation. The main advantage of using the T-matrix approach, rather than the first-order approach of Eshelby or the second-order approach of Hudson, is that it produces physically plausible results even when the volume concentrations of inclusions or cavities are no longer small. The new formulae, which operates with an arbitrary homogeneous (anisotropic) reference medium and contains terms of all order in the volume concentrations of solid particles and communicating cavities, take explicitly account of inclusion shape and spatial distribution independently. We show analytically that an expansion of the T-matrix formulae to first order in the volume concentration of cavities (in agreement with the dilute estimate of Eshelby) has the correct dependence on the properties of the saturating fluid, in the sense that it is consistent with the Brown–Korringa relation, when the frequency is sufficiently low. We present numerical results for the (anisotropic) effective viscoelastic properties of a cracked permeable medium with finite storage porosity, indicating that the complete T-matrix formulae (including the higher-order terms) are generally consistent with the Brown–Korringa relation, at least if we assume the spatial distribution of cavities to be the same for all cavity pairs. We have found an efficient way to treat statistical correlations in the shapes and orientations of the communicating cavities, and also obtained a reasonable match between theoretical predictions (based on a dual porosity model for quartz–clay mixtures, involving relatively flat clay-related pores and more rounded quartz-related pores) and laboratory results for the ultrasonic velocity and attenuation spectra of a suite of typical reservoir rocks.     

Three-Dimensional Geopositioning Accuracy of Ikonos Imagery

An investigation of the accuracy potential of Ikonos 1m satellite imagery is reported. Three sensor orientation/triangulation models are applied to stereo- and three-image configurations of "Geo" imagery with the aim of achieving 3D geopositioning to sub-metre accuracy. The models considered comprise rational functions with bias compensation, affine projection and the direct linear transformation. Test results from the Melbourne Ikonos Testfield are reported and these show that with modest provision of good quality ground control, Ikonos "Geo" imagery can yield 3D object-point determination to an accuracy of 0.5m in planimetry and 0.7m in height. The accuracy achieved is not only consistent with expectations for rigorous sensor orientation models, but is also readily attainable in practice with only a small number of ground control points being required     

Modelling the seismic attributes of overpressured siliciclastic rocks, with a genetic annealing (GAN) algorithm

ABSTRACT A genetic annealing (GAN) algorithm is used to derive an empirical model which predicts compressional-wave velocity values for overpressured siliciclastic rocks. The algorithm involves non-linear random searching and mutation techniques and its annealing component imposes a very strict control over the rate of convergence of the search. This technique provides an alternative to the standard calculations involving the effective stress coefficient ( n ). The pore pressure is introduced into the model as an explicit variable and as part of an overpressure coefficient, ( P _p/ P _c) − the ratio of pore to confining pressure. Empirical model-derived data and known laboratory data are compared and their differences are shown to be within statistically acceptable error limits. The empirical equation fits all under- and overpressured data simultaneously, irrespective of pore fluid pressure level, with the same parameters. It is used to predict seismic velocities very accurately for extreme levels of overpressure, starting from normally pressured experimental data. The model highlights the effect of pore pressure on the compressional-wave velocity of fully saturated samples with different clay contents. It can be used when the experimental data available are sparse and particularly when a prediction of material behaviour is necessary at specific pore fluid pressure and depth conditions.     

The influence of sampling design on spatial data quality in a geographic citizen science project

Geographic citizen science has much potential to assist in wildlife research and conservation, but the quality of observation data is a key concern. We examined the effects of sampling design on the quality of spatial data collected for a koala citizen science project in Australia. Data were collected from three samples—volunteers (n = 454), an Internet panel (n = 103), and landowners (n = 35)—to assess spatial data quality, a dimension of citizen science projects rarely considered. The locational accuracy of koala observations among the samples was similar when benchmarked against authoritative data (i.e., an expert‐derived koala distribution model), but there were differences in the quantity of data generated. Fewer koala location data were generated per participant by the Internet panel sample than the volunteer or landowner samples. Spatial preferences for land uses affecting koala conservation were also mapped, with landowners more likely to map locations for residential and tourism development and volunteers less likely. These spatial preferences have the potential to influence the social acceptability of future koala conservation proposals. With careful sampling design, both citizen observations and land use preferences can be included within the same project to augment scientific assessments and identify conservation opportunities and constraints.     

Regional structural controls of gold mineralisation,Bendigo and Castlemaine goldfields,Central Victoria,Australia

The Bendigo and Castlemaine goldfields are classic examples of structurally controlled orogenic gold deposits in the Bendigo Zone of central Victoria, SE Australia. Detailed mapping and biostratigraphic interpretation has led to a better understanding of the regional structural controls of this type of gold-quartz mineralisation. Mineralised quartz veins are hosted by the Castlemaine Group, an Early-to-Middle Ordovician turbidite succession at least 3,000 m thick. Gold deposits are controlled by low-displacement faults that are clustered into several belts (the goldfields) indicating a regional structural control. The timing of mineralisation overlapped with that of the major period of deformation including folding, cleavage development and regional faulting. The Bendigo and Castlemaine goldfields are located in an area termed the Whitelaw thrust sheet bounded by two unmineralised, high-displacement, regional-scale faults. Mapping has revealed an interrelationship between the regional-scale faults, regional structural style and goldfield location. The goldfields lie immediately west of the boundary between the upper and lower portions of the thrust sheet and are characterised by symmetric folds with sub-horizontal to synclinal enveloping surfaces, relatively low co-axial strains and moderate cleavage development. The non-gold-bearing areas immediately east of each goldfield correspond with the lower part of the Whitelaw thrust sheet and are characterised by higher non-coaxial strains, stronger cleavage and folds with wide west-dipping limbs giving rise to easterly vergent sections and steeply west-dipping enveloping surfaces. That mineralisation was an integral part of the thin-skinned style of deformation in the central Bendigo Zone is indicated by timing relationships and the interrelationship between local-scale mineralised structures and regional-scale features such as large-displacement unmineralised faults, regional variations in fold style and overall thrust sheet geometry. The work supports previous models that suggest mineralised fluids were focussed along a linked system of deep-seated faults. The primary conduits may have been major regional-scale ‘intrazone’ faults, which are inferred to sole into detachments near the base of the Castlemaine Group. It is proposed that these structures linked with minor intrazone faults and then with networks of low-displacement mineralised faults that were strongly controlled by folds. The location of minor intrazone faults was probably controlled by internal thrust sheet geometry. The distribution of gold deposits and of gold production suggests that maximum fluid flow was concentrated along the eastern margins of networks of low-displacement faults.     

Graphical methods for rapid vector analysis of demagnetization data

Summary. Working graphs are presented which, when used in conjunction with a stereographic projection, enable (a) magnitude and direction of the difference between two vectors to be estimated, and (b) a vector to be resolved into two or three components of prescribed directions. Applications of the methods to multicomponent natural remanent magnetizations are illustrated.