Mahafir: A water harvesting system in the Eastern Jordan (Badia) Eesert

There are many different water harvesting systems in the Middle East and the operation of one type, the mahafir, was investigated in the Badia Region of Jordan. Mahafir are crescent and rectangular shaped excavations dug into the playa surface, now filled with sediment. Their previous volumes were estimated through topographical survey of the surrounding earth mounds. The average depth of the mahafir was found to be 3.2 m; storing a total water volume of 111,619 m³ at Maharouta and 55,005 m³ at Anka. The mahafir only occupy 4% of the playa surface and their source of water is primarily direct rainfall onto the playa surface augmented by runoff from adjacent slopes. Taking annual rainfalls as an input from 1963 to 1992 and even assuming rainfall harvesting is only 10% effective it appears that the full water storage potential of the mahafir could be met in most years.     

A basalt-trachyte-phonolite series from Ua Pu,Marquesas Islands,Pacific Ocean

The paper describes a suite of volcanic and intrusive rocks from Ua Pu, one of the Marquesas Islands, situated in the central Pacific Ocean. The rocks comprise alkali olivine basalts, hawaiites, mugearites, trachytes, and phonolites. Their petrographic characters are briefly described and 24 new chemical analyses presented. The rocks fall into a sodic and a potassic series, since some rocks are richer in K₂O than Na₂O, whilst the phonolites have exceptionally high total alkali contents.The differentiation of the series is discussed and special attention is paid to the phonolites in which icositetrahedral pseudomorphs occur. It is concluded that these pseudomorphs are probably after analcime rather than leucite.     

Chloritoid stability in very iron-rich altered pillow lavas

Conclusions Our major conclusions are that the strong correlation of P₂O₅ and light REE abundances in basalts does not (a) require residual apatite or whitlockite during partial melting, or (b) imply that P₂O₅ and REE-rich magmas are derived from more refractory sources than the source of magmas with lower P₂O₅ and REE contents.     

Plate tectonics and the fusion of Asia

The coincidence of orogenic belts containing zones of high pressure metamorphism, ophiolites and deepwater sediments with faunal province boundaries leads to the postulation of several sutural zones within Asia. About nine blocks are defined and it is suggested on the basis of palaeogeographical, palaeontological and tectonic evidence that Asia did not fuse completely until well into the Mesozoic.     

Recent changes in sea level and their possible causes

A new analysis of ‘global’ sea level has been made that largely avoids space/time bias of previous works. A coherent pattern of increasing relative sea level (RSL) was found to exist on average at all stations analyzed between 1903–1969. Subject to considerable assumption, the rate of RSL increase associated with this pattern was 15 cm/century. A similar analysis of the period 1930–1975 again showed RSL increasing on average everywhere but in the western half of the North Pacific Ocean. Decrease of RSL in this area was substantiated by hydrographic data. Thus in recent years the concept of a ‘global’ sea level rise is not supported. The temporal behavior of thenear global signals from both time periods was well approximated by a simple linear trend. There was no evidence of a more rapid rise in RSL in recent years. Potential causes of the above RSL change were investigated. Changes in the position of the earth's axis of rotation support the idea that the RSL change was due to approximately equal melting of Greenland/Antarctica. Changes in the length of day only marginally support this idea. However, other attractive geophysical explanations for variations in both these astronomical parameters exist. Observed change in sea surface temperature (SST), if representative of reasonable changes in vertical thermal structure, could give the observed RSL change. However, the SST data are likely biased instrumentally toward increasing trend. Also, thermal expansion of the oceans would not significantly affect the rotational parameters although changes in these parameters could be due to non-RSL related processes. Changes in ocean circulation and/or subsidence along all the coastal margins simultaneously seem unlikely causes of the observed change in RSL. In summary, it is not possible at this time to explain reliably the apparent increase in RSL.     

Chemical processes and migration of elements during retrogression of a staurolite-zone assemblage in western North Carolina

A detailed study of retrograde alteration of a staurolite porphyroblast and its surrounding matrix of mica schist has made use of petrographic, modal, and microprobe analysis. Retrogression was to the garnet zone of metamorphism and apparently occurred largely after a temperature decline of 70–100° C. The event caused metasomatic removal of Zn but may have been isochemical relative to other analyzed elements. The best estimate of the overall reaction is: 1 staurolite+3.018 biotite+3.550 quartz+0.629 albite +0.014 anorthite+0.678 NaCl+14.004 H₂O =3.274 Na-rich muscovite+3.561 chlorite +0.273 ilmenite+0.110 chloritoid+0.039 garnet +0.339 ZnCl₂.Non-systematic variation in composition of analyzed minerals is revealed by statistical treatment of replicate analyses. Such variation involves monovalent and divalent cations within many minerals, but is most pronounced within retrograde muscovite. Muscovite variation involves Si and Al as well as FM and alkalis and does not follow a phengite law of charge-coupled substitution.Relative to the core of the retrograded staurolite crystal, zoning is seen in averaged muscovite compositions and in development of incompatible mineral assemblages, which include chloritoid well within retrograded staurolite but biotite within the matrix. A local gradient in the chemical potential of an Al-bearing component was likely present during retrogression.Alteration of staurolite was probably accomplished by reaction and diffusion through the medium of an intergranular fluid phase. Relative to staurolite, migration of elements involved immigration of considerable amounts of Mg, Na, K, and H and expulsion of Al, Fe, Zn, and O. It is inferred that concentration of Al within the fluid phase was considerably lower than those of monovalent and divalent cations.Preservation of considerable staurolite and evidence for a local concentration gradient of Al in the fluid phase suggest that limited amounts of H₂O were available. Expulsion of Zn suggests that much water was not consumed locally but exited the terrane. An attempt at resolution of this dilemna involves fracture-channelized infiltration of H₂O into the rock. A more regional petrographic study of retrogression suggests that H₂O which entered the rock may have been liberated initially by prograde dehydration at a moderately greater depth of 2–3 km.Results of this study, especially the non-phengitic nature of crystal-chemical substitution within muscovite, indicate chemical reaction under conditions of disequilibrium. Apparently, extent of retrogression was controlled by availability of H₂O rather than by thermochemical equilibria.     

Velocities of compressional and shear waves in limestones

Carbonate rocks are important hydrocarbon reservoir rocks with complex textures and petrophysical properties (porosity and permeability) mainly resulting from various diagenetic processes (compaction, dissolution, precipitation, cementation, etc.). These complexities make prediction of reservoir characteristics (e.g. porosity and permeability) from their seismic properties very difficult. To explore the relationship between the seismic, petrophysical and geological properties, ultrasonic compressional‐ and shear‐wave velocity measurements were made under a simulated in situ condition of pressure (50 MPa hydrostatic effective pressure) at frequencies of approximately 0.85 MHz and 0.7 MHz, respectively, using a pulse‐echo method. The measurements were made both in vacuum‐dry and fully saturated conditions in oolitic limestones of the Great Oolite Formation of southern England. Some of the rocks were fully saturated with oil. The acoustic measurements were supplemented by porosity and permeability measurements, petrological and pore geometry studies of resin‐impregnated polished thin sections, X‐ray diffraction analyses and scanning electron microscope studies to investigate submicroscopic textures and micropores. It is shown that the compressional‐ and shear‐wave velocities (V_p and V_s, respectively) decrease with increasing porosity and that V_p decreases approximately twice as fast as V_s. The systematic differences in pore structures (e.g. the aspect ratio) of the limestones produce large residuals in the velocity versus porosity relationship. It is demonstrated that the velocity versus porosity relationship can be improved by removing the pore‐structure‐dependent variations from the residuals. The introduction of water into the pore space decreases the shear moduli of the rocks by about 2 GPa, suggesting that there exists a fluid/matrix interaction at grain contacts, which reduces the rigidity. The predicted Biot–Gassmann velocity values are greater than the measured velocity values due to the rock–fluid interaction. This is not accounted for in the Biot–Gassmann velocity models and velocity dispersion due to a local flow mechanism. The velocities predicted by the Raymer and time‐average relationships overestimated the measured velocities even more than the Biot model.     

The acoustic signature of fluid flow in complex porous media

Effective medium approximations for the frequency-dependent and complex-valued effective stiffness tensors of cracked/porous rocks with multiple solid constituents are developed on the basis of the T-matrix approach (based on integral equation methods for quasi-static composites), the elastic–viscoelastic correspondence principle, and a unified treatment of the local and global flow mechanisms, which is consistent with the principle of fluid mass conservation. The main advantage of using the T-matrix approach, rather than the first-order approach of Eshelby or the second-order approach of Hudson, is that it produces physically plausible results even when the volume concentrations of inclusions or cavities are no longer small. The new formulae, which operates with an arbitrary homogeneous (anisotropic) reference medium and contains terms of all order in the volume concentrations of solid particles and communicating cavities, take explicitly account of inclusion shape and spatial distribution independently. We show analytically that an expansion of the T-matrix formulae to first order in the volume concentration of cavities (in agreement with the dilute estimate of Eshelby) has the correct dependence on the properties of the saturating fluid, in the sense that it is consistent with the Brown–Korringa relation, when the frequency is sufficiently low. We present numerical results for the (anisotropic) effective viscoelastic properties of a cracked permeable medium with finite storage porosity, indicating that the complete T-matrix formulae (including the higher-order terms) are generally consistent with the Brown–Korringa relation, at least if we assume the spatial distribution of cavities to be the same for all cavity pairs. We have found an efficient way to treat statistical correlations in the shapes and orientations of the communicating cavities, and also obtained a reasonable match between theoretical predictions (based on a dual porosity model for quartz–clay mixtures, involving relatively flat clay-related pores and more rounded quartz-related pores) and laboratory results for the ultrasonic velocity and attenuation spectra of a suite of typical reservoir rocks.     

Three-Dimensional Geopositioning Accuracy of Ikonos Imagery

An investigation of the accuracy potential of Ikonos 1m satellite imagery is reported. Three sensor orientation/triangulation models are applied to stereo- and three-image configurations of "Geo" imagery with the aim of achieving 3D geopositioning to sub-metre accuracy. The models considered comprise rational functions with bias compensation, affine projection and the direct linear transformation. Test results from the Melbourne Ikonos Testfield are reported and these show that with modest provision of good quality ground control, Ikonos "Geo" imagery can yield 3D object-point determination to an accuracy of 0.5m in planimetry and 0.7m in height. The accuracy achieved is not only consistent with expectations for rigorous sensor orientation models, but is also readily attainable in practice with only a small number of ground control points being required