Calibration of the high-pressure cohesive strength meter (CSM)

Coastal erosion is an immense economic and social problem that has been receiving increased attention in recent years. A number of devices have been developed to determine the sediment stability in coastal areas: laboratory and field flumes; a range of different erosion devices; shear vanes and fall cone penetrometers. The cohesive strength meter (CSM) erosion device was developed to determine in situ the temporal and spatial variations in the erosion threshold of muddy intertidal sediments. Technological developments have enabled considerable improvements to be made to the original design over the last 15 years.     

Solitary wave generation dynamics at Luzon Strait

A high resolution modeling study is undertaken, with a 2.5-dimensional nonhydrostatic model, of the generation of internal waves induced by tidal motion over the ridges in Luzon Strait. The model is forced by the barotropic tidal components K1, M2, and O1. These tidal components, along with the initial density field, were extracted from data and models. As the barotropic tide moves over the Luzon Strait sills, there is a conversion of barotropic tidal energy into baroclinic tidal energy. Depressions are generated that propagate towards the Asian Seas International Acoustics Experiment (ASIAEX) test site on the Chinese continental shelf. Nonlinear effects steepen the depressions, frequency and amplitude dispersion set in, and disintegration into large amplitude solitary waves occurs. The effects of varying the initial density field, tidal component magnitudes, as well as adding a steady background current to represent the occasional excursions of the Kuroshio Current into the strait, are considered.Depressions are generated at each of the two sills in Luzon Strait which radiate away, steepening and evolving into internal solitary wave trains. Baroclinic fluxes of available potential energy, kinetic energy and linear are calculated for various parameter combinations. The solitary wave trains produced in the simulations generally consist of large amplitude wave trains alternating with small amplitude wave trains. During strong tidal flow, Kelvin–Helmholtz type instabilities can develop over the taller double-humped sill. The solitary waves propagating towards the ASIAEX test site have been observed to reach amplitudes of 120–250 m, depending on the tidal strength. ASIAEX observations indicate amplitudes up to 150 m and the Windy Island Experiment (WISE) measurements contain magnitudes over 200 m. The model results yield solitary wave amplitudes of 70–300 m and half widths of 0.60–3.25 km, depending on parameter values. These are in the range of observations. Measurements by Klymak et al. (2006), in the South China Sea, exhibit amplitudes of 170 m, half widths of 3 km and phase speeds of 2.9 m s^?1. Model predictions indicate that the solitary waves making up the wave packet each experience different background currents with strong near surface shear.The energy in the leading soliton of the large amplitude wave trains ranges between 1.8 and 9.0 GJ m^?1. The smaller value, produced using barotropic tidal currents based on the Oregon State University data base, is the same as the energy estimated to be in a solitary wave observed by Klymak et al. (2006). Estimates of the conversion of barotropic tidal energy into radiating internal wave energy yield conversion rates ranging between 3.6% and 8.3%.     

Eclogite thermobarometry: The consistency between conventional thermobarometry and forward phase-equilibrium modelling

Eclogite thermobarometry is crucial for constraining the depths and temperatures to which oceanic and continental crust subduct. However, obtaining the pressure and temperature (P–T) conditions of eclogites is complex as they commonly display high-variance mineral assemblages, and the mineral compositions only vary slightly with P–T. In this contribution, we present a comparison between two independent and commonly used thermobarometric approaches for eclogites: conventional thermobarometry and forward phase-equilibrium modelling. We assess how consistent the thermobarometric calculations are using the garnet–clinopyroxene–phengite barometer and garnet–clinopyroxene thermometer with predictions from forward modelling (i.e. comparing the relative differences between approaches). Our results show that the overall mismatch in methods is typically ±0.2–0.3 GPa and ±29–42°C although differences as large as 80°C and 0.7 GPa are possible for a few narrow ranges of P–T conditions in the forward models. Such mismatch is interpreted as the relative differences among methods, and not as absolute uncertainties or accuracies for either method. For most of the investigated P–T conditions, the relatively minor differences between methods means that the choice in thermobarometric method itself is less important for geological interpretation than careful sample characterization and petrographic interpretation for deriving P–T from eclogites. Although thermobarometry is known to be sensitive to the assumed X_Fe³⁺ of a rock (or mineral), the relative differences between methods are not particularly sensitive to the choice of bulk-rock X_Fe³⁺, except at high temperatures (>650°C, amphibole absent) and for very large differences in assumed X_Fe³⁺ (0–0.5). We find that the most important difference between approaches is the activity–composition (a–x) relations, as opposed to the end-member thermodynamic data or other aspects of experimental calibration. When equivalent a–x relations are used in the conventional barometer, P calculations are nearly identical to phase-equilibrium models (ΔP < 0.1). To further assess the implications of these results for real rocks, we also evaluate common mathematical optimizations of reaction constants used for obtaining the maximum P–T with conventional thermobarometric approaches (e.g. using the highest aGrs² × aPrp in garnet and Si content in phengite, and the lowest aDi in clinopyroxene). These approaches should be used with caution, because they may not represent the compositions of equilibrium mineral assemblages at eclogite facies conditions and therefore systematically bias P–T calculations. Assuming method accuracy, geological meaningful P_max at a typical eclogite facies temperature of ~660°C will be obtained by using the greatest aDi, aCel, and aPrp and lowest aGrs and aMs; garnet and clinopyroxene with the lowest Fe²⁺/Mg ratios may yield geological meaningful T_max at a typical eclogite facies pressure of 2.5 GPa.     

Searches for very high energy gamma rays from blazars with CANGAROO-III telescope in 2005-2009

We have searched for very high energy (VHE) gamma rays from four blazars using the CANGAROO-III imaging atmospheric Cherenkov telescope. We report the results of the observations of H 2356-309, PKS 2155-304, PKS 0537-441, and 3C 279, performed from 2005 to 2009, applying a new analysis to suppress the effects of the position dependence of Cherenkov images in the field of view. No significant VHE gamma ray emission was detected from any of the four blazars. The GeV gamma-ray spectra of these objects were obtained by analyzing Fermi/LAT archival data. Wide range (radio to VHE gamma-ray bands) spectral energy distributions (SEDs) including CANGAROO-III upper limits, GeV gamma-ray spectra, and archival data, even though they are non-simultaneous, are discussed using a one-zone synchrotron self-Compton (SSC) model in combination with a external Compton (EC) radiation. The HBLs (H 2356-309 and PKS 2155-304) can be explained by a simple SSC model, and PKS 0537-441 and 3C 279 are well modeled by a combination of SSC and EC model. We find a consistency with the blazar sequence in terms of strength of magnetic field and component size.     

Variable stars in the field of open cluster NGC 6819

We report on the discovery of 25 variable stars plus 13 suspected variables found in the field of the open cluster NGC 6819. The stars were identified from time-series photometric data obtained on the Isaac Newton Telescope, La Palma, during two observing runs covering the 19 nights between 1999 June  22–30  and 1999 July  22–31  . The variables found include 12 eclipsing binaries with an additional three suspected, nine BY Draconis systems, plus four variables of other types, including one star believed to be a Cepheid. Three of the 15 eclipsing binaries are believed to be cluster members. Details of a further 10 suspected variable stars are also included.     

Grain-scale variations in trace element composition of fluid-altered zircon,Acasta Gneiss Complex,northwestern Canada

SEM back-scattered electron images of zircon separates from a 2.9 Ga granitic dyke from the Acasta Gneiss Complex, Slave Province, reveal primary igneous oscillatory zoning which is transgressively overprinted by irregular alteration domains. Electron microprobe analyses show that altered zircon domains are depleted in Zr and Si relative to unaltered zircon while retaining a constant Zr/Si ratio. SIMS trace element analyses indicate that LREE are preferentially enriched in the altered domains. Altered zircon contains elevated concentrations of Ba (up to 580 ppm), Ca (up to 2% weight of the element) and common Pb (>50 ppb). The presence of LREE, Ca, Ba and common Pb in the zircons is interpreted to be the result of secondary alteration by an aqueous fluid, and not by primary incorporation during crystallization. We propose that the alteration-related elements are located in amorphous zircon domains.     

Quasi-sinusoidal oscillations of the angular velocity of pulsars

We study the oscillations of the angular velocity of pulsars, obtaining an equation for the angular velocity and its derivative taking account of the curvature of vortices. We show that this equation has a quasisinusoidal solution and find the period of these oscillations. We show that the estimates for the value of the periods for various models of neutron stars give quantities of the order of tens of days, which is in agreement with the observations of the quasi-periodic oscillations and fluctuations of the angular velocity of pulsars.Translated fromAstrofizika, Vol. 38, No. 2, 1995.     

Little Ice Age glaciers in the Balkans: low altitude glaciation enabled by cooler temperatures and local topoclimatic controls

Moraine ridges are present in the highest cirques of the Durmitor massif in Montenegro and post‐date the widespread Pleistocene moraines of this area. Lichenometry suggests that at least eight glaciers were present in the 19th century and correlate with the culmination of the Little Ice Age in the European Alps. Cooler temperatures combined with local topoclimatic controls, including windblown and avalanching snow as well as shading, were crucial for the formation and survival of these glaciers below the regional equilibrium–line altitude. The resultant regional equilibrium line altitude (ELA) was positioned close to the highest peaks between 2400 and 2500 m, with local controls such as avalanche, windblown snow and shading depressing the ELA in the northern cirques to 2130–2210 m. This ELA position was very low for this latitude and lower than for most glaciers in the European Alps at any time during the Holocene, and even equivalent to many Alpine glaciers during the Younger Dryas. Today, one glacier still survives in Montenegro, in a deep northeast‐facing cirque characterized by the largest combined areas of potential avalanche and windblown snow. Copyright © 2009 John Wiley & Sons, Ltd.     

Petrology of the Easter microplate region in the South Pacific

Submersible investigations along the East Rift segments, the Pito Deep and the Terevaka transform fault of the Easter microplate eastern boundary, and on a thrust-fault area of the Nazca Plate collected a variety of basalts and dolerites. The volcanics consist essentially of depleted (N-MORB), transitional (T-MORB) and enriched (E-MORB) basalts with low (0.01−0.1, < 0.7), intermediate (0.12–0.25, 0.7–1.2) and high (> 0.25, > 1.2–2) K/Ti and(La/Sm)_N ratios, respectively. The Fe-Ti-rich ferrobasalt encountered among the N-MORBs are found on the Pito Deep Central volcano, on the Terevaka intra-transform ridge, on the ancient (< 2.5 Ma) Easter microplate (called EMP, comprising the East Rift Inner pseudofaults and Pito Deep west walls) and on thrust-fault crusts. The most enriched (T- and E-MORB) volcanics occur along the East Rift at 25 °50′–27 °S (called 26 °S East Rift) and on the Pito seamount located near the tip of the East Rift at 23 °00′–23 °40′S (called 23 °S East Rift). The diversity in incompatible element ratios of the basalts in relation to their structural setting suggests that the volcanics are derived from a similar heterogenous mantle which underwent variable degrees of partial melting and magma mixing. In addition the Pito seamount volcanics have undergone less crystal fractionation (< 20%) than the lavas from the other Easter microplate structures (up to 35–45%). The tectonic segmentation of the East Rift observed between 23 and 27 °S corresponds to petrological discontinuities related to Mg# variations and mantle melting conditions. The highest Mg# (> 61) are found on topographic highs (2000–2300 m) and lower values (Mg# < 56) at the extremities of the East Rift segments (2500–5600 m depths). The deepest area (5600 m) along the East Rift is located at 23 °S and coincides with a Central volcano constructed on the floor of the Pito Deep. Three major compositional variabilities of the volcanics are observed along the East Rift segments studied: (1) the 26 °S East Rift segment where the volcanics have intermediate Na₈ (2.5–2.8%) and Fe₈ (8.5–11%) contents; (2) the 23 °S East Rift segment (comprising Pito seamount and Pito Deep Central volcano) which shows the highest (2.9–3.4%) values of Na₈ and a low (8–9%) Fe₈ content; and (3) the 25 °S (at 24 °50′–26 °10′S) and the 24 °S (at 24 °10′–25 °S) East Rift segments where most of the volcanics have low to intermediate Na₈ (2.6–2.0%) and a high range of Fe₈ (9–13%) contents. When modeling mantle melting conditions, we observed a relative increase in the extent of partial melting and decreasing melting pressure. These localized trends are in agreement with a 3-D type diapiric upwelling in the sense postulated by Niu and Batiza (1993). Diapiric mantle upwelling and melting localized underneath the 26, 25 and 23 °S (Pito seamount and Central volcano) East Rift segments are responsable for the differences observed in the volcanics. The extent of partial melting varies from 14 to 19% in the lithosphere between 18 and 40 km deep as inferred from the calculated initial (P_o=16kbar) and final melting (P_f=7kbar) pressures along the various East Rift segments. The lowest range of partial melting (14–16%) is confined to the volcanics from 23 °S East Rift segment including the Pito seamount and the Central volcano. The Thrust-fault area, and the Terevaka intra-transform show comparable mantle melting regimes to the 25 and 26 °S East Rift segments. The older lithosphere of the EMP interior is believed to have been the site of high partial melting (17–20%) confined to the deeper melting area (29–50 km). This increase in melting with increasing pressure is similar to the conditions encountered underneath the South East Pacific Rise (13–20 °S).     

Anomalous Behavior of the Linear Polarization of the Herbig Ae Star WW Vul during the 1997 Minimum

In the course of photopolarimetric monitoring of the Herbig Ae star WW Vul, an unusual variation of linear polarization upon energence from a deep minimum was recorded, which cannot be explained by the standard mechanism for such objects (UX Ori stars): a variable contribution of radiation scattered by circumstellar dust. An analysis of possible causes of the anomalous behavior of polarization shows that it was most likely due to the presence of aligned, aspherical dust grains in the dust cloud crossing the line of sight at that time.