Estimating the hydraulic properties of an aquitard from in situ pore pressure measurements

A workflow is described to estimate specific storage (S _s) and hydraulic conductivity (K) from a profile of vibrating wire piezometers embedded into a regional aquitard in Australia. The loading efficiency, compressibility and S _s were estimated from pore pressure response to atmospheric pressure changes, and K was estimated from the earliest part of the measurement record following grouting. Results indicate that S _s and K were, respectively, 8.8?×?10^?6 to 1.2?×?10^?5 m^?1 and 2?×?10^?12 m s^?1 for a claystone/siltstone, and 4.3?×?10^?6 to 9.6?×?10^?6 m^?1 and 1?×?10^?12 to 5?×?10^?12 m s^?1 for a thick mudstone. K estimates from the pore pressure response are within one order of magnitude when compared to direct measurement in a laboratory and inverse modelled flux rates determined from natural tracer profiles. Further analysis of the evolution and longevity of the properties of borehole grout (e.g. thermal and chemical effects) may help refine the estimation of formation hydraulic properties using this workflow. However, the convergence of K values illustrates the benefit of multiple lines of evidence to support aquitard characterization. An additional benefit of in situ pore pressure measurement is the generation of long-term data to constrain groundwater flow models, which provides a link between laboratory scale data and the formation scale.     

Petrophysical and mechanical properties of Euganean trachyte and implications for dimension stone decay and durability performance

Euganean trachyte is a subvolcanic porphyritic rock extracted in northern Italy with an age-old tradition of use as dimension stone, historically linked, in particular, to the fervent building activity brought by the Roman Empire and, later on, the Republic of Venice Serenissima. The results of a comprehensive petrophysical and mechanical characterization of Euganean trachyte from the most representative quarries are discussed here, involving the following properties: density, porosity, water absorption, capillary water uptake, hygroscopic water adsorption, hydric/hygric dilatation, water vapor diffusion, thermal expansion, and resistance to salt attack and abrasion. The different trachyte varieties, although belonging to the same quarry basin, exhibit a relatively wide array of technical performances, which are strongly dependent on pore volume, size, size distribution, shape, and degree of interconnection, controlling modes and rates of water transport and retention. Therefore, indications are provided for evaluating durability performance of the stone, with stress on water-driven weathering. Complementary information is finally given on the possible criteria followed in the antiquity for properly selecting the trachyte quarries to be exploited, and by a comparison with the properties of the most important trachytes extracted in Europe.     

The action of neutral oleic acid in the flotation of hematite

Acidification of solutions of oleate salts forms emulsions of oleic acid. It was found that these emulsions produce a different adsorption behaviour on different size fractions of the same mineral. At low oleate concentrations, for the finer fractions, adsorption at acid pH was higher than chemisorption at pH = 7.5; adsorption was lower for the coarser, flotation-size fractions. Therefore, the conclusions obtained in acid solutions for the adsorption of oleate on fine minerals cannot be applied to flotation-size minerals.At low oleate concentrations there is a good correlation between oleate adsorption and hematite flotation. This does not hold for oleate concentrations > 5· 10^?5M, where there is poor flotability in the acid region, although the adsorption of oleic acid is very high. This is attributed to the disordered character of the layer of cooperatively adsorbed oleic acid.