Application of an in-plane/out-of-plane interaction model for URM infill walls to dynamic seismic analysis of RC frame buildings

Experimental tests have shown that unreinforced masonry (URM) infill walls are affected by simultaneous loading in their in-plane and out-of-plane directions, but there have been few attempts to represent this interaction in nonlinear time history analysis of reinforced concrete (RC) buildings with URM infill walls. In this paper, a recently proposed macro-model that accounts for this interaction is applied to the seismic analysis of RC framed structures with URM infill walls representative of Mediterranean building stock and practices. Two RC framed structures that are representative of low and mid-rise residential buildings are analysed with a suite of a bidirectional ground motions, scaled to three different intensities. During the analyses, the in-plane/out-of-plane interaction is monitored, showing that cracking of the infills occurs predominantly by in-plane actions, while failure occurs due to a combination of in-plane and out-of-plane displacements, with the out-of-plane component usually playing the dominant role. Along the frame height, the bottom storeys are generally the most damaged, especially where thin infill walls are used. These results are consistent with observations of damage to URM infill walls in similar buildings during recent earthquakes.     

Non‐linear seismic analysis and vulnerability evaluation of a masonry building by means of the SAP2000 V.10 code

The aim of the paper is to explore the possibilities offered by SAP2000^® v.10, a software package with user‐friendly interface widely used by practising engineers, for seismic analyses of masonry buildings. The reliability of the code was first investigated by carrying out static push‐over (SPO) analyses of two walls, already analysed by other researchers using advanced programs. The equivalent frame modelling was employed in all analyses carried out. The code was then used to investigate the seismic performance of an existing two‐storey building typical of the north‐east of Italy, with the walls being made of roughly squared stones. An SPO analysis was performed first on the most significant wall, followed by a number of time‐history analyses aimed to evaluate the dynamic push‐over curves. Finally, the seismic fragility curves were derived, considering the seismic input as a random variable. Copyright © 2007 John Wiley & Sons, Ltd.     

Evidence for short-lived oscillations in the biological records from the sediments of Lago Albano (Central Italy) spanning the period ca. 28 to 17 k yr BP

We report the results of analyses of pigments (derived from algae and photosynthetic bacteria), diatoms and invertebrate fossil remains (ostracods, cladocerans, chironomids) in two late Pleistocene sediment cores from Lago Albano, a crater lake in Central Italy. The record contains evidence for oscillations in lake biota throughout the period ca. 28 to 17 k yr BP. The earliest of these are contained in the basal 3.5 m of light olive-gray and yellowish-gray spotted muds sampled in core PALB 94-1E from 70 m water depth. The later oscillations are best represented in the more extended sediment sequence recovered from a second core site, PALB 94-6B, in 30 m water depth. The sediments at site 1E, containing the earlier oscillations (ca. 28-24 k yr BP), predate any sedimentation at the shallower site, from which we infer an initially low lake level rising to permit sediment accumulation at site 6B from ca. 24 k yr onwards. At site 6B, massive silts rich in moss remains are interbedded with laminated silts and carbonates. These sediments span the period ca. 24 to 17 k yr and are interpreted as representing, respectively, times of shallow water alternating with higher lake stands, when the lake was stratified and bottom water was stagnant. A range of mutually independent chronological constraints on the frequency and duration of the oscillations recorded in the lake biota indicate that they were aperiodic and occurred on millennial to century timescales. We interpret them as responses to climate forcing through its impact on lake levels and changing aquatic productivity. The time span they occupy, their frequency and their duration suggest that at least some of these changes may parallel both the Dansgaard-Oeschger events recorded in Greenland Ice Cores and the contemporary oscillations in North Atlantic circulation documented in marine sediment cores.     

Geophysical investigation of the Colônia structure,Brazil

The origin of the nearly circular Colônia structure, located at the southwestern edge of the city of São Paulo, Brazil, has been the subject of a long‐standing debate, ever since the 1960s when the structure was first investigated by geophysical methods. The structure still raises interest for geological research, as its sedimentary infill holds important paleoclimatic information about the evolution of the tropical rainforest, as well as the interplay between the South American summer monsoon, the Intertropical Convergence Zone, and the southern Westerly wind belt—for possibly as long as several million years. In addition, the search for evidence to conclusively establish the origin of this structure continues, and the answer most likely lies in the lower portions of the basin's sedimentary infill, which also holds a significant potential for underground water resources. Here, we present the results from recent seismic (reflection and HVSR), gravimetric, and geoelectrical surveys. They have provided a reliable image of the sedimentary infill, and the maximum depth to basement within the structure has been constrained consistently by the different methods to approximately ?400 m. The geophysical data have also allowed to map the lateral contact between the crystalline basement rocks and the sedimentary infill, which indicates a diameter of approximately 2.8 km for the sedimentary basin, with 3.6 km being the diameter of the outermost limit of the structure. A total of six seismic stratigraphic boundaries were identified within the sedimentary infill, providing a framework for the planning of a deep drilling campaign and subsequent sampling program aimed at geological and paleoclimatology studies.     

Geant4 simulations of soft proton scattering in X-ray optics

Low energy protons (< 300 keV) can enter the field of view of X-ray telescopes, scatter on their mirror surfaces at small incident angles, and deposit energy on the detector. This phenomenon can cause intense background flares at the focal plane decreasing the mission observing time (e.g. the XMM-Newton mission) or in the most extreme cases, damaging the X-ray detector. A correct modelization of the physics process responsible for the grazing angle scattering processes is mandatory to evaluate the impact of such events on the performance (e.g. observation time, sensitivity) of future X-ray telescopes as the ESA ATHENA mission. The Remizovich model describes particles reflected by solids at glancing angles in terms of the Boltzmann transport equation using the diffuse approximation and the model of continuous slowing down in energy. For the first time this solution, in the approximation of no energy losses, is implemented, verified, and qualitatively validated on top of the Geant4 release 10.2, with the possibility to add a constant energy loss to each interaction. This implementation is verified by comparing the simulated proton distribution to both the theoretical probability distribution and with independent ray-tracing simulations. Both the new scattering physics and the Coulomb scattering already built in the official Geant4 distribution are used to reproduce the latest experimental results on grazing angle proton scattering. At 250 keV multiple scattering delivers large proton angles and it is not consistent with the observation. Among the tested models, the single scattering seems to better reproduce the scattering efficiency at the three energies but energy loss obtained at small scattering angles is significantly lower than the experimental values. In general, the energy losses obtained in the experiment are higher than what obtained by the simulation. The experimental data are not completely representative of the soft proton scattering experienced by current X-ray telescopes because of the lack of measurements at low energies (< 200 keV) and small reflection angles, so we are not able to address any of the tested models as the one that can certainly reproduce the scattering behavior of low energy protons expected for the ATHENA mission. We can, however, discard multiple scattering as the model able to reproduce soft proton funnelling, and affirm that Coulomb single scattering can represent, until further measurements at lower energies are available, the best approximation of the proton scattered angular distribution at the exit of X-ray optics.     

Approximate solutions of non-linear circular orbit relative motion in curvilinear coordinates

A compact, time-explicit, approximate solution of the highly non-linear relative motion in curvilinear coordinates is provided under the assumption of circular orbit for the chief spacecraft. The rather compact, three-dimensional solution is obtained by algebraic manipulation of the individual Keplerian motions in curvilinear, rather than Cartesian coordinates, and provides analytical expressions for the secular, constant and periodic terms of each coordinate as a function of the initial relative motion conditions or relative orbital elements. Numerical test cases are conducted to show that the approximate solution can be effectively employed to extend the classical linear Clohessy–Wiltshire solution to include non-linear relative motion without significant loss of accuracy up to a limit of 0.4–0.45 in eccentricity and 40–45\(^\circ \) in relative inclination for the follower. A very simple, quadratic extension of the classical Clohessy–Wiltshire solution in curvilinear coordinates is also presented.     

Pie de Palo, Argentina: A cataclastic diapir

The term cataclastic diapirism is proposed for the low-temperature extrusion of highly fractured rocks through more competent strata to produce domed topographies at the surface. The process is illustrated by reference to the geomorphology, neotectonics and microseismicity of the Pie de Palo, an elongated ridge in the western Sierras Pampeanas of Argentina composed of shattered and sheared Lower Palaeozoic rocks and subject to coseismic uplift. The Pie de Palo is conventionally interpreted as a fault-driven basement fold linked to low-angle eastward subduction of the Nazca plate beneath South America; the diapiric model implies instead that deformation is powered by regional compression from west-verging, near-surface, crustal shortening which results ultimately from Atlantic spreading.     

Large-scale bedforms along a tideless outer shelf setting in the western Mediterranean

High-resolution multibeam swath-bathymetry and sediment samples were collected across the outer shelf region of the Columbretes Islands (southern Ebro continental shelf, western Mediterranean Sea). Bathymetric data from the submerged part of the Columbretes volcanic system revealed the presence of three main relict sand bodies along the outer shelf, at 80–116 m depth range, above which asymmetric and slightly asymmetric large and very large 2D and 3D subaqueous dunes were observed. These bed features were recognized, mapped and quantified with the aim of evaluating their potential formation mechanisms in relation to the local hydrodynamic and morphologic settings of the area. Dunes range from 150 to 760 m in wavelength and from tens of centimeters to 3 m in height, and are among the longest ever recognized in an outer shelf region. These bedforms are mostly composed of medium-sized sandy sediments, presumably coming from the degraded relict sand bodies on top of which they have developed, mixed with fine fractions from the recent draping holocenic sediments. The orientation of the dunes is SSW, progressively turning W towards the southernmost sector of the area, following the trend of the shelf-edge. Contemporary hydrodynamic measurements at the Ebro continental shelf-edge show that recorded currents are insufficient to form the observed bedforms and that stronger currents are required for sediment mobilization and dune formation. Based on their morphology and orientation, it is proposed that these bedforms are produced by the action of the southward-flowing Liguro-Provençal-Catalan (LPC) geostrophic current. The LPC probably reaches high near-bottom currents during energetic hydrodynamic events through interactions with the seafloor morphology of the study area. Subaqueous dunes are expected to be basically inactive features with respect to present-day processes, although they can be reactivated during high-energy events. The small Δh/λ ratio measured in the dune fields of the Columbretes shelf revealed that the dune heights fall below the values predicted by the Flemming (1988) global equation, as observed in other outer shelf settings also dominated by unidirectional flows. This may suggest a different morphodynamic character of large dunes formed on outer shelves in a micro-tidal regime.     

Palaeoenvironmental control on sediment composition and provenance in the late Quaternary deltaic successions: a case study from the Po delta area (Northern Italy)

Accumulation of continental, deltaic and shallow‐marine sediments in the Po River coastal plain preserves a record of the Late Quaternary sea‐level changes and shoreline migrations. The palaeoenvironmental evolution of this area and the changes in composition and provenance of sediments have been investigated through integrated sedimentological, micropalaeontological (mainly foraminifers) and geochemical analyses of core S1, from the southern part of the Po River delta, within a chronological framework supported by radiocarbon dating and correlations with adjacent core sequences. Eleven lithofacies, grouped into five facies associations, and four palaeontological assemblages provide the basis to define the palaeoenvironmental reconstruction of this succession consisting, from the base to the top, of: (i) continental sediments accumulated during the Late Pleistocene; (ii) back‐barrier sediments marking the onset of Holocene sea‐level rise; (iii) transgressive sands deposited during the rapid landward migration of a barrier‐lagoon system; (iv) shallow‐marine and prodelta sediments with faunal associations indicating a gradual approach to the Po River mouth; and (v) sub‐recent delta front sands that form a considerable portion of the present coastal plain. Bulk chemical composition of sediments shows remarkable relationships with palaeoenvironments and locally improves facies characterizations. For example, they reveal carbonate leaching that emphasizes the occurrence of palaeosols in continental deposits or record enrichments in loss on ignition, S and Br, diagnostic of organic‐rich layers in back‐shore sediments. Selected geochemical elements (e.g. Mg and Ni) are particularly effective for the recognition of sediment provenances from the three main source areas observed in the subsurface deposits of the Po River coastal plain (e.g. Apenninic rivers, North Adriatic rivers and Po River). An Apenninic provenance is observed in continental and back‐barrier sediments. A North Adriatic provenance characterizes the transgressive sands and the shallow‐marine deposits; a significant Po River provenance is recorded in sediments related to the onset of the prodelta environment, confirmed by foraminiferal assemblages indicating remarkable increase in fluvial influxes. Copyright © 2006 John Wiley & Sons, Ltd.