The influence of topography on the cloud-to-ground lightning density in South Brazil

A comparative analysis between cloud-to-ground (CG) lightning density and terrain parameters (altitude and terrain slope) in South Brazil is presented. This region is characterized by a contrasting topography, where a mountain chain separates lower (depression) and higher (plateau) landscapes. The altitude and terrain slope data were obtained from the Shuttle Radar Topography Mission (SRTM) digital elevation model (DEM). Two years of CG lightning data (from June 2005 to May 2007) obtained by the Brazilian Lightning Detection Network (BrasilDAT) were used in the study. To avoid intracloud contamination, positive CG flashes with peak currents less than 20 kA were removed from the data set. A relative detection efficiency model was used to correct the lightning data. The results indicate that, for localized areas (following the mountain shape) within this region of Brazil, the CG lightning density is correlated with the terrain slope and not the altitude. This suggests that terrain slope has more influence than altitude on the thunderstorm occurrence and lightning activity. In addition, a temporal analysis shows that over high altitude regions the diurnal variation (amplitude) of lightning activity is stronger and the peak occurs 1 h earlier than over low altitude regions.     

One century sedimentary record of Hg and Pb pollution in the Sagua estuary (Cuba) derived from Pb and Cs chronology

The vertical distribution of Hg and Pb were determined in a sediment core collected from the Sagua estuary (North Cuba) that receives input from the Sagua river, one of the most polluted rivers discharging into the Cuban coastal environment. Depth profiles of metal concentrations were converted to time-based profiles using the ²¹⁰Pb dating method and confirmed with the ¹³⁷Cs fallout peak. The mean mass accumulation rate was estimated to be 0.17 ± 0.04 g cm⁻² y⁻¹ (mean sediment accumulation rate 0.52 ± 0.13 cm y⁻¹) and the core bottom was estimated to date back about 130 years. The historical sedimentary record showed a strong enrichment of mercury concentrations in the past decades, caused by the incomplete treatment of industrial wastes from a chlor-alkali plant with mercury-cell technology in the Sagua river basin. Lead fluxes to sediments showed a gradual increase from the 1920s to present, which agrees with a population increase in Sagua la Grande City. Fluxes of both metals have increased the past 25 years, with values reaching a maximum of 0.5 and 3.9 μg cm⁻² y⁻¹ for Hg and Pb, respectively.     

Analysis of lateral loading of pile groups using embedded beam elements with interaction surface

The numerical simulation of soil-pile interaction problems, by means of full 3D finite element models, involves a large number of degrees of freedom (DOF) and difficulties during the mesh generation process. In order to reduce the unknowns and simplify and properly analyze such class of geotechnical problems, the so-called embedded beam elements (EBE) have recently been developed. In a preceding contribution of the authors, an improved EBE formulation, which brings into play the soil-pile interaction surface, was proposed with the aim to localize material plasticity in the soil surrounding the pile. This embedded beam model couples two different finite elements, each described by distinct kinematics (ie, solid and beam). The coupling is incorporated in the formulation by means of kinematical constrains established over the solid and beam displacement fields on the interaction surface. One of the main advantages of the embedded elements is that the addition of beams structural members immersed within the 3D soil model does not represent a constraint for the solid mesh, which can be adopted independently from the beam mesh. In this paper, the lateral loading of pile groups is studied by means of the proposed EBE approach with elasto-plastic interfaces. In order to represent a rigid cap, a master node and a special set of kinematical restrictions are incorporated into the formulation. The paper presents results obtained by means of the present formulation compared against other well-established analysis methods and test results published in the literature, for both elastic and elasto-plastic cases.     

The Soil Geochemical Atlas of Portugal: Overview and applications

The continental area of Portugal is now entirely covered by a soil geochemical survey (1 site/135 km²), taking as the sampling media topsoils (upper mineral horizons, A) and organic horizons (humus, O). Standard methods for sampling, sample preparation and analysis were used in order to achieve high quality and consistent data. Each sample was analyzed for 32 chemical elements, pH, electrical conductivity and organic matter content.The main purpose of the survey was to obtain baseline levels for various chemical elements. The compilation of all data (nearly 45,000 individual data) in an organised way, led to the production of the first Soil Geochemical Atlas of Portugal. In this Atlas it is possible to find for each chemical element a set of information statistics (basic statistical parameters, boxplots, cumulative frequency curves, etc.), maps of spatial distribution, among other information of geochemical and environmental interest. This paper gives an overview of the Soil Atlas and examples of application. The data were used to calculate reference values for 9 elements of environmental importance and to obtain empirical formulae allowing the estimation of elements in the coarse fraction of soils (< 2.00 mm) from known concentration in a finer fraction (< 0.18 mm).     

The changing Patagonian landscape: Erosion and westward sediment transfer paths in northern Patagonia during the Middle and Late Pleistocene

Pleistocene glaciations have promoted important landscape transformations as a result of high rates of erosion and rapid sediment evacuation to adjacent marine basins. In the Patagonian Andes the role of the Patagonian Ice Sheet on landscape evolution, in particular the spatial patterns of glacial erosion and its influence on sediment fluxes, is poorly documented. Here, we investigate the Middle and Late Pleistocene sedimentary record of the continental slope from Ocean Drilling Program (ODP) Site 861, offshore Patagonia (46°S), to evaluate the link between glaciations, mountain range erosion and continental margin strata formation. Petrographic analysis of the sand-size fraction (0.063–2 mm) and ɛNd and ⁸⁷Sr/⁸⁶Sr measurements in the silt-size fraction (10–63 µm) indicate that glacial erosion over the last 350,000 years has focused within the Patagonian Batholith, with a minor influence of a proximal source to the drilling site, the Chonos Metamorphic Complex. This shows that erosion has focused in the core of the northern Patagonian Andes, coinciding roughly with the location of the Liquiñe-Ofqui Fault Zone and the zone of concentrated precipitation during glaciations, suggesting a combined climatic and structural control on glacial erosion. Temporal variation in the provenance signal is contemporaneous with a marked change in the stratigraphy of ODP Site 861 that occurred after the glaciation of MIS 8 (~240 kyr ago). Before MIS 8, a restricted provenance signal and coarse lithofacies accumulated on the continental slope indicates spatially restricted erosion and efficient transfer of sediment towards the ocean. In contrast, very high provenance variability and finer continental slope lithofacies accumulation after MIS 8 suggest a disorganized expansion of the areas under erosion and a more distal influence of ice sediment discharge to this site. We argue that this change may have been related to a re-organization of the drainage patterns of the Patagonian Ice Sheet and flow of outlet glaciers to the continental margin during the last two glaciations.     

Effects of alkaline-activated fly ash and Portland cement on soft soil stabilisation

This paper studies the effects of sodium-based alkaline activators and class F fly ash on soil stabilisation. Using the unconfined compressive strength test (UCS), the effectiveness of this binder is compared with that of a common cement-based binder. Influence of the activator/ash ratio, sodium oxide/ash ratio and sodium hydroxide concentration was also analysed. Sodium hydroxide concentrations of 10, 12.5 and 15 molal were used for the alkaline-activated specimens (AA), with activator/ash ratios between 1 and 2.5 and ash percentages of 20, 30 and 40 %, relatively to the total solids (soil + ash). UCS was determined at curing periods of 7, 28, 90 and 365 days, and the most effective mixtures were analysed for mineralogy with XRD. The results showed a clear increase in strength with decreasing activator/ash ratio (up to a maximum of 43.4 MPa), which is a positive result since the activator is the most expensive component in the mixture. Finally, UCS results of the cement and AA samples, at 28 days curing, were very similar. However, AA results proved to be just between 20 and 40 % of the maximum UCS obtained at 1 year curing, while cement results at 28 days are expected to be between 80 and 90 % of its maximum.     

Metal partitioning in sediments and mineralogical controls on the acid mine drainage in Ribeira da Água Forte (Aljustrel,Iberian Pyrite Belt,Southern Portugal)

This work focuses on the geochemical processes taking place in the acid drainage in the Ribeira da Água Forte, located in the Aljustrel mining area in the Iberian Pyrite Belt. The approach involved water and stream sediment geochemical analyses, as well as other techniques such as sequential extraction, Mössbauer spectroscopy, and X-ray diffraction. Ribeira da Água Forte is a stream that drains the area of the old mine dumps of the Aljustrel mine, which have for decades been a source of acid waters. This stream flows to the north for a little over than 10 km, but mixes with a reduced, organic-rich, high pH waste water from the municipal waste water pools of the village. This water input produces two different results in the chemistry of the stream depending upon the season: (i) in the winter season, effective water mixing takes place, and the flux of acid water from the mine dumps is continuous, resulting in the immediate precipitation of the Fe from the acid waters; (ii) during the summer season, acid drainage is interrupted and only the waste water feeds the stream, resulting in the reductive dissolution of Fe hydroxides and hydroxysulfates in the stream sediments, releasing significant quantities of metals into solution. Throughout the year, water pH stays invariably within 4.0–4.5 for several meters downstream of this mixing zone even when the source waters come from the waste water pools, which have a pH around 8.4. The coupled interplay of dissolution and precipitation of the secondary minerals (hydroxides and sulfates), keeps the system pH between 3.9 and 4.5 all along the stream. In particular, evidence suggests that schwertmannite may be precipitating and later decomposing into Fe hydroxides to sustain the stream water pH at those levels. While Fe content decreases by 50% from solution, the most important trace metals are only slightly attenuated before the solution mixes with the Ribeira do Rôxo stream waters. Concentrations of As are the only ones effectively reduced along the flow path. Partitioning of Cu, Zn and Pb in the contaminated sediments also showed different behavior. Specific/non-specific adsorption is relevant for Cu and Zn in the upstream branch of Ribeira da Água Forte with acid drainage conditions, whereas the mixture with the waste water causes that the association of these metals with oxyhydroxide to be more important. Metals bound to oxyhydroxides are on the order of 60–70% for Pb, 50% for Cu and 30–60% for Zn. Organic matter is only marginally important around the waste water input area showing 2–8% Cu bound to this phase. These results also show that, although the mixing process of both acid and organic-rich waters can suppress and briefly mitigate some adverse effects of acid drainage, the continuing discharge of these waste waters into a dry stream promotes the remobilization of metals fixed in the secondary solid phases in the stream bed back into solution, a situation that can hardly be amended back to its original state.     

Experimental analysis of different software packages for orientation and digital surface modelling from UAV images

The use of UAVs finds application in a variety of fields, among which are the small scale surveys for environmental protection application. In this frame some experimental tests were carried out at Politecnico di Milano to assess metric accuracies of images acquired by UAVs and derived photogrammetric products. A block of 5 strips and 49 photos was taken by fixed wing system SenseFly, carrying a camera Canon Ixus 220HS on a rural area included in an Italian Park. Images are processed through bundle adjustment, automatic DEM extraction and orthoimages production steps with several software packages, with the aim to evaluate their characteristics, capabilities and weaknesses. The software packages tested were Erdas-LPS, EyeDEA (University of Parma), Agisoft Photoscan, Pix4UAV, PhotoModeler Scanner. For the georeferencing of the block 16 pre-signalized ground control points were surveyed in the area through GPS (NRTK survey). Comparison of results is given in terms of differences among orientation parameters and their accuracies. Moreover, comparisons among different digital surface models are evaluated. Furthermore, exterior orientation parameters, image points and ground points coordinates, obtained by the various software packages, were used as initial values in a comparative adjustment made by scientific in-house software. Paper confirms that computer vision software are faster in computation and, even if their main goal is not to pursue high accuracy in points coordinates determination, they seems to produce results comparable to those obtainable with standard photogrammetric approach. Agisoft Photoscan seems in this case to yield the best results in terms of quality of photogrammetric products.     

Exploring spatial relationships between stream channel features,water depths and flow velocities during flash floods using HEC-GeoRAS and Geographic Information Systems

Journal of Geographical Sciences - Water depths and flow velocities decisively influence the damage caused by flash floods. Geographic Information System (GIS) is a powerful and useful tool,...