Landslide triggering scenarios in homogeneous geological contexts: The area surrounding Acri (Calabria, Italy)

The paper describes a methodology to detect landslide triggering scenarios in geological homogeneous areas and for some specific landslide categories. In these scenarios, the rainfall–landslide relationship as well as the pluviometric load conditions influencing slope instability have to be investigated.The methodology is applied to an area located in northern Calabria (Italy) and affected by widespread and different slope instability phenomena. Outcropped, fractured, and deeply weathered crystalline rock masses, determining geologic homogeneous conditions, are present. In the same area, suitable and homogeneous climatic features have also been found.According to the methodology adopted, the hydrologic analysis of rainfall time-series is initially carried out notwithstanding historical data concerning landslide mobilization, but using simple models to determine critical pluviometric scenarios for the three landslide categories: shallow, medium-deep, and deep. Landslide-triggering scenarios individualized according to this procedure are less significant as compared to the landslide mobilization detected in the study area by means of historical research and ascribed to the three landslide categories according to geomorphologic analysis.Subsequently, the possible landslide triggering scenarios are outlined by carefully investigating the hydrologic analysis limited to the periods identified according to the historical data.In the study area and approximately for all the areas characterized by the outcrop of fractured and deeply weathered crystalline rocks, significant triggering scenarios can be outlined. In particular, shallow landslide triggers could be activated by rainfall events with intensities exceeding 90 mm/day and/or with amounts exceeding 160 mm. As for medium-deep and deep landslides, triggering mechanisms are more complicated; and effective rainfall contribution must be taken into account compared to groundwater storage. Moreover, a more complex link between deep landslides and precipitation is confirmed.The results obtained to date highlight the potential of this methodology, which enables us to define and progressively improve the knowledge framework by means of a work sequence integrating different disciplinary tools and results.     

E (B-V) determination from an UV-visual two-colour diagram: O and B stars in the catalogue of stellar ultraviolet fluxes

We present here, for the O and B type stars in the Catalogue of Stellar Ultraviolet Fluxes, an approach which does not require a precise knowledge of spectral type and luminosity class for derivingE(B-V) colour excesses. The method is based on the use of an UV-visual two-colour diagram; galactic variations in the interstellar extinction law are analyzed and fully taken into account. Our results have been compared with those derived by using the differences between observed and intrinsic colours for stars with known spectral classification. The very good agreement in a large number of cases (94 per cent) demonstrates that our approach permits the derivation of reliable colour excess values for early type stars even if only a rough spectral classification is available.     

The formation of porphyry copper deposits

Copper is a moderately incompatible chalcophile element. Its behavior is strongly controlled by sulfides. The speciation of sulfur is controlled by oxygen fugacity. Therefore, porphyry Cu deposits are usually oxidized (with oxygen fugacities > ΔFMQ +2) (Mungall 2002; Sun et al. 2015). The problem is that while most of the magmas at convergent margins are highly oxidized, porphyry Cu deposits are very rare, suggesting that high oxygen fugacity alone is not sufficient. Partial melting of mantle peridotite even at very high oxygen fugacities forms arc magmas with initial Cu contents too low to form porphyry Cu deposits directly (Lee et al. 2012; Wilkinson 2013). Here we show that partial melting of subducted young oceanic slabs at high oxygen fugacity (>ΔFMQ +2) may form magmas with initial Cu contents up to >500 ppm, favorable for porphyry mineralization. Pre-enrichment of Cu through sulfide saturation and accumulation is not necessarily beneficial to porphyry Cu mineralization. In contrast, re-melting of porphyritic hydrothermal sulfide associated with iron oxides may have major contributions to porphyry deposits. Thick overriding continental crust reduces the “leakage” of hydrothermal fluids, thereby promoting porphyry mineralization. Nevertheless, it is also more difficult for ore forming fluids to penetrate the thick continental crust to reach the depths of 2–4 km where porphyry deposits form.     

The solubility of quartz in aqueous sodium chloride solution at 350°C and 180 to 500 bars

The solubility of quartz in 2, 3, and 4 molal NaCl was measured at 350°C and pressures ranging from 180 to 500 bars. The molal solubility in each of the salt solutions is greater than that in pure water throughout the measured pressure range, with the ratio of solubility in NaCl solution to solubility in pure water decreasing as pressure is increased. The measured solubilities are significantly higher than solubilities calculated using a simple model in which the water activity in NaCl solutions decreases either in proportion to decreasing vapor pressure of the solution as salinity is increased or in proportion to decreasing mole fraction of water in the solvent.     

Guided wave propagation in laterally varying media - II. Lg-waves in north-western Europe

Summary. Lg -wave observations at NORSAR from a sequence of explosions straddling the Central Graben in the North Sea, show that the phase is almost extinguished by passing through this structure. For models of the graben structure, based on seismic refraction experiments, with crustal thinning beneath a zone of thickened sediments, numerical modelling of Lg propagation shows very poor transmission. The inclusion of attenuation simulating the effects of scattering from faults and other complex structures further diminishes the transmittivity. The theoretical effect of a crustal pinch is to redistribute S energy over a wide range of groups velocities, a pattern that fits well with the observations.
Three components recordings at NORSAR of explosive charges fired in water covering a wide range of azimuths, show significant transverse components to the seismograms. The transverse energy builds up with travel time and for Lg is of the same order as the vertical component. These results are consistent with the theoretical prediction of progressive net transfer of energy from Rayleigh to Love modes as the wavetrain propagates through a three-dimensionally heterogeneous medium.     

VELOCITY DISPERSION OF SEISMIC WAVES*

In well velocity surveys made to calibrate Sonic (CV) Logs the calibration survey uses frequencies around 50 Hz whereas the Sonic Logging tool uses frequencies around 20 kHz. There thus exists the possibility of making a direct measure of velocity dispersion. In any one survey the disturbing factors, both instrumental and operational, will often mask any dispersive effect that might exist. Consequently this paper reports on a statistical analysis of the velocity differences resulting from calibration surveys and Sonic logs. Only Borehole Compensated Sonic Logs were used. Four areas were investigated: the North Sea, Abu Dhabi, Libya and Alaska. After rejecting logs and calibration records which were obviously in error there remained 424000 feet (about 130 km) of usable log distributed throughout 66 wells. The four areas were analysed separately and in no case was the estimated dispersion significantly different from zero. However, the mean values did correlate with lithology from (? 0.17 ± 0.18)% for the essentially carbonate section in Abu Dhabi to (+ 0.45 ± 0.25)% for the sand-shale section in Alaska, a positive sign meaning that the higher frequencies travelled faster. Except for Alaska the calibration surveys were made with a wall-clamp geophone, and for these areas amplitude measurements were made. After suitable corrections estimates of the absorption parameter Q were obtained. These varied from 20 to 200 with mean values of 63 for Libya, 70 for Abu Dhabi and 88 for the North Sea (excluding the Tertiary). If, as is usually assumed, the absorption mechanism is linear and is described by a Q which is independent of frequency, then these values would necessarily imply dispersion of several percent. As instanced above no such dispersion was observed. It is possible that the expected dispersion was compensated for by invasion of the mud filtrate into the borehole walls, but it is more likely that the absorption mechanism was substantially non-linear.     

Volcanogenic massive sulfide deposits of ophiolite associations

Volcanogenic massive sulfide deposits in ophiolite complexes are usually attributed to the Cyprus type. They associate with basaltic volcanics that are formed in mid-ocean or back-arc spreading centers and much less frequently in intra-plate settings. The deposits are characterized by copper or copper-zinc ores that are enriched in Ni, Co, and in places Mn and As, but are very poor in Pb and demonstrate a low to moderate content of Ag and Au. Typically, the deposits are low to very low in ore and metal reserves. Cyprus-type deposits were irregularly distributed during geological history. The most ancient of them were formed in the Neoproterozoic, while the bulk of the deposits are Ordovician or Cretaceous in age. Their possible Paleoproterozoic analogues can be found in the Svecofennian belt (Outokumpu ore district), while modern ones are confined to the Explorer and Endeavour Ridges and southern segment of the Juan de Fuca Ridge.     

Sources of dissolved REE in mountainous streams draining granitic rocks, Sierras Pampeanas (Córdoba, Argentina)

Stream waters draining granitic terrains from the highest part (850 to 2200 m a.s.l.) of Sierras Pampeanas (Córdoba, Argentina, ∼32°S, ∼65°W) were sampled in order to define sources and distribution of dissolved rare earth elements (REE), and to describe the geochemical processes that govern their mobility. The contribution of the regional granite to the dissolved REE pool in stream water is limited due to the physical conditions predominating in the area (i.e., steep slopes and semiarid climate). Therefore, precipitation is considered a seasonally significant source controlling REE concentration in stream water. Dissolved REE concentrations are inversely correlated with monthly precipitation and rainfall frequency. During the rainy season (i.e., the austral summer) REE concentrations in stream water are lower than during the dry season (i.e., austral winter). Such low concentrations reflect the balance between the REE input from precipitation and their removal by adsorption. In contrast, during the dry season, the longer residence time of water within fractures and colluvium determines an increased REE concentration in the base flow. Lower pH values also contribute to raise REE concentration through desorption from mineral surfaces.     

Estimating Petroleum Resources Using Geo-Anchored Method--A Sensitivity Study

The Geo-anchored method, based on a moment-type estimator, has been developed for estimating parent population properties from a successive sample of discoveries. By substituting the expectation of the waiting time z _(n+1) of the (n + 1) ^th discovery to occurrence for an unknown parameter in the anchored method, the Geo-anchored method allows estimation of inclusion probabilities directly from observed data, thus eliminating the need for a priori selection of a value of N, R, or some other feature of the parent population. Because direct estimation of N and R requires an ordered sample, the Geo-anchored method is more sensitive to the data-generating process than the anchored method. This paper presents a sensitivity study on the Geo-anchored method. The test is based on simulated discovery sequences with different assumptions regarding discovery efficiency, exploration maturity, and the shape of the parent field size distribution. As a reference for comparison, estimates from the Horvitz–Thompson estimator also are presented.