A hydrochemical study of the Hammam Righa geothermal waters in north-central Algeria

This study focuses on the hydrochemical characteristics of 47 water samples collected from thermal and cold springs that emerge from the Hammam Righa geothermal field, located in north-central Algeria. The aquifer that feeds these springs is mainly situated in the deeply fractured Jurassic limestone and dolomite of the Zaccar Mount. Measured discharge temperatures of the cold waters range from 16.0 to 26.5 °C and the hot waters from 32.1 to 68.2 °C. All waters exhibited a near-neutral pH of 6.0–7.6. The thermal waters had a high total dissolved solids (TDS) content of up to 2527 mg/l, while the TDS for cold waters was 659.0–852.0 mg/l. Chemical analyses suggest that two main types of water exist: hot waters in the upflow area of the Ca–Na–SO₄ type (Hammam Righa) and cold waters in the recharge zone of the Ca–Na–HCO₃ type (Zaccar Mount). Reservoir temperatures were estimated using silica geothermometers and fluid/mineral equilibria at 78, 92, and 95 °C for HR4, HR2, and HR1, respectively. Stable isotopic analyses of the δ¹⁸O and δD composition of the waters suggest that the thermal waters of Hammam Righa are of meteoric origin. We conclude that meteoric recharge infiltrates through the fractured dolomitic limestones of the Zaccar Mount and is conductively heated at a depth of 2.1–2.2 km. The hot waters then interact at depth with Triassic evaporites located in the hydrothermal conduit (fault), giving rise to the Ca–Na–SO₄ water type. As they ascend to the surface, the thermal waters mix with shallower Mg-rich groundwater, resulting in waters that plot in the immature water field in the Na–K–Mg diagram. The mixing trend between cold groundwaters from the recharge zone area (Zaccar Mount) and hot waters in the upflow area (Hammam Righa) is apparent via a chloride-enthalpy diagram that shows a mixing ratio of 22.6 < R < 29.2 %. We summarize these results with a geothermal conceptual model of the Hammam Righa geothermal field.     

Improvement of saponification extraction method for fatty acids separation from geological samples

The conventional saponification method could result in lower recoveries and artificial changes of long-chain fatty acids. The main reason is the error judgment of the intermediate layer suspended between the aqueous and organic layer during the liquid–liquid extraction process. This study shows that the intermediate layer consists of lots of medium- to long-chain carboxylic salts for their special physical and chemical properties. An improved saponification extraction method is also developed and the results show that the carboxylic salts distributed in the intermediate layer could be obtained completely, which greatly enhances the authenticity and accuracy of fatty acid analysis. Additionally, the possible reasons of formation of the intermediate layer are also discussed.     

An optimized sequential extraction scheme for molybdenum association in environmental samples

By comparing three sequential extraction procedures, a new optimized extraction scheme for the molybdenum association in environmental samples was proposed. Five operational steps were described as exchangeable (KH₂PO₄ + K₂HPO₄: including water-soluble), associated with organic matter (NaOH), Fe–Mn oxides and/or carbonates (HCl), sulfides (H₂O₂) and residue (HNO₃ + HF + H₂O₂). An optimized extraction scheme was compared with Tessier’s procedure and the Commission of European Communities Bureau of Reference (BCR) was applied to black shales. Results showed Tessier’s procedure gave the lowest concentration values for exchangeable molybdenum and the highest values for the residual molybdenum, which could not present the efficiency of the extraction reagents. BCR’s procedure showed the highest values in oxidizable molybdenum and presented four fractions of molybdenum, which did not demonstrate the fractions of molybdenum in the black shales in detail. The optimized extraction scheme demonstrated a certain improvement on extraction efficiency over Tessier’s procedure for the lowest residual molybdenum, and revealed more featured fraction information of molybdenum in black shales than BCR’s. Therefore, after a comparison with other two extraction procedures, the optimized extraction scheme proved suitable for the molybdenum in black shales and it also showed an accurate determination of the molybdenum in the fractions and source of bioavailable Mo.     

Ra’s Abdah of the north Eastern Desert of Egypt: the role of granitic dykes in the formation of radioactive mineralization,evidenced by zircon morphology and chemistry

Syenogranitic dykes in the north of Egypt’s Eastern Desert are of geological and economic interest because of the presence of magmatic and supergene enrichment of radioactive mineralization. Zircon crystal morphology within the syenogranitic dykes allows precise definition of sub-alkaline series granites and crystallized at mean temperature of about 637 °C. The growth pattern of the zircons suggest magmatic and hydrothermal origins of radioactive mineralization. Hydrothermal processes are responsible for the formation of significant zircon overgrowth; high U-zircon margins might have occurred contemporaneously with the emplacement of syenogranitic dykes which show anomalous uranium (eU) and thorium (eTh) contents of up to 1386 and 7330 ppm, respectively. Zircon chemistry revealed a relative increase of Hf consistent with decreasing Zr content, suggesting the replacement of Zr by Hf during hydrothermal activity. Visible uranium mineralization is present and recognized by the presence of uranophane and autunite.     

Geochemistry of sedimentary rocks from Permian–Triassic boundary sections of Tethys Himalaya: implications for paleo-weathering,provenance, and tectonic setting

The geochemical characteristics of two sections—the Permian–Triassic boundary (PTB) Guryul Ravine section, Kashmir Valley, Jammu and Kashmir, India; and the Attargoo section, Spiti Valley, Himachal Pradesh, India—have been studied in the context of provenance, paleo-weathering, and plate tectonic setting. These sections represent the siliciclastic sedimentary sequence from the Tethys Himalaya. The PTB siliciclastic sedimentary sequence in these regions primarily consists of sandstones and shales with variable thickness. Present studied sandstones and shales of both sections had chemical index of alteration values between 65 and 74; such values reveal low-to-moderate degree of chemical weathering. The chemical index of weathering in studied samples ranged from 71 to 94, suggesting a minor K-metasomatism effect on these samples. Plagioclase index of alteration in studied sections ranged from 68 to 92, indicating a moderate degree of weathering of plagioclase feldspars. The provenance discriminant function diagram suggests that the detritus involved in the formation of present studied siliciclastic sedimentary rocks fall in quartzose sedimentary and felsic igneous provenances. These sediments were deposited in a passive continental margin plate tectonic setting according to their location on a Si₂O versus K₂O/Na₂O tectonic setting diagram.     

Nuclear field shift effects on stable isotope fractionation: a review

An anomalous isotope effect exists in many heavy element isotope systems (e.g., Sr, Gd, Zn, U). This effect used to be called the “odd–even isotope effect” because the odd mass number isotopes behave differently from the even mass number isotopes. This mass-independent isotope fractionation driving force, which originates from the difference in the ground-state electronic energies caused by differences in nuclear size and shape, is currently denoted as the nuclear field shift effect (NFSE). It is found that the NFSE can drive isotope fractionation of some heavy elements (e.g., Hg, Tl, U) to an astonishing degree, far more than the magnitude caused by the conventional mass-dependent effect (MDE). For light elements, the MDE is the dominant factor in isotope fractionation, while the NFSE is neglectable. Furthermore, the MDE and the NFSE both decrease as temperatures increase, though at different rates. The MDE decreases rapidly with a factor of 1/T², while the NFSE decreases slowly with a factor of 1/T. As a result, even at high temperatures, the NFSE is still significant for many heavy element isotope systems. In this review paper, we begin with an introduction of the basic concept of the NSFE, including its history and recent progress, and follow with the potential implications of the inclusion of the NFSE into the kinetic isotope fractionation effect (KIE) and heavy isotope geochronology.     

Fractionation characteristics of rare earth elements (REEs) linked with secondary Fe,Mn, and Al minerals in soils

Soil secondary minerals are important scavengers of rare earth elements (REEs) in soils and thus affect geochemical behavior and occurrence of REEs. The fractionation of REEs is a common geochemical phenomenon in soils but has received little attention, especially fractionation induced by secondary minerals. In this study, REEs (La to Lu and Y) associated with soil-abundant secondary minerals Fe-, Al-, and Mn-oxides in 196 soil samples were investigated to explore the fractionation and anomalies of REEs related to the minerals. The results show right-inclined chondrite-normalized REE patterns for La–Lu in soils subjected to total soil digestion and partial soil extraction. Light REEs (LREEs) enrichment features were negatively correlated with a Eu anomaly and positively correlated with a Ce anomaly. The fractionation between LREEs and heavy REEs (HREEs) was attributed to the high adsorption affinity of LREEs to secondary minerals and the preferred activation/leaching of HREEs. The substantial fractions of REEs in soils extracted by oxalate and Dithionite-Citrate-Bicarbonate buffer solutions were labile (10 %–30 %), which were similar to the mass fraction of Fe (10 %–20 %). Furthermore, Eu was found to be more mobile than the other REEs in the soils, whereas Ce was less mobile. These results add to our understanding of the distribution and geochemical behavior of REEs in soils, and also help to deduce the conditions of soil formation from REE fractionation.     

胶东玲珑金矿田175号脉群深部地质特征与成矿预测

玲珑金矿属于以石英脉型为主的金矿床,其矿脉受玲珑断裂和破头青断裂控制。区内脉群发育,175号脉群是玲珑金矿的主要大型金矿脉群之一。文章通过总结175号脉群成矿地质背景、矿床地质特征,分析了控矿因素、矿体赋存规律、矿石类型等;阐述了175号脉群深部成矿规律,并根据见矿工程利用地质块段法预测175号脉群11—101勘探线范围-800 m标高以下(332+333)金矿石量192.44×10~4 t,金金属量8.5t。     

中国大陆降水时空变异规律——Ⅲ. 趋势变化原因

中国大陆现代降水表现出若干长期变化特征,对现代降水趋势性变化的原因,目前还没有很好了解。结合多种资料分析以及前人研究成果,对中国大陆近几十年降水变化趋势的原因进行了探讨,得到以下初步认识:① 现代降水量变化趋势具有明显的地域性差异,全国平均没有表现出显著增加或减少的长期变化,但强降水事件频率和降水量出现明显增多,而小雨事件特别是痕量降水事件显著减少。② 再分析资料表明,最近几十年全国水汽净收支量在一定程度上增加了,实际观测资料显示近地面和对流层中下层空气比湿或大气可降水量出现较明显上升趋势。③ 代用资料序列分析显示,全国大部地区近几十年降水变化仍处于晚近历史时期正常自然波动范围内;近百年观测的降水量序列也表明,黄淮海地区降水具有多重时间尺度相互叠加作用特点,低频自然气候变异的影响信号有清晰表现。④ 人类活动引起的大气中温室气体浓度增加对全国或东部季风区现代降水变化影响的信号,目前仍难以识别;区域性近地面风速减弱导致的雨量观测系统偏差以及大范围气溶胶浓度增加,可能是东部季风区大多数台站观测到的强降水事件频率增加和小雨频率显著减少的两个重要原因。⑤ 主要与城市化影响相关的地面观测资料系统偏差,可以部分解释现有分析表明的短历时强降水事件频率和累计降水量增加现象,同时也很可能是城市台站小雨和痕量降水事件频率明显下降的另一重要原因。     

Study on the Global Carbon Assimilation System Based on Multisource Remote Sensing Data

The Paris agreement signed in April, 2016 aims to balance global anthropogenic carbon emissions and terrestrial carbon sinks by the middle of the 21^st century. To fulfill this goal, it is necessary to calculate carbon fluxes of different regions reliably. The global carbon assimilation system is an effective technique for achieving this goal. The Ministry of Science and Technology of China supports the project entitled as study on the global carbon assimilation system based on multisource remote sensing data through the national key research and development programs for global change and adaptation during the thirteen-five period. This project will develop synergic inversion techniques for retrieving key parameters of biological and atmospheric cycles and for assimilating multisource remote sensing and ground based data. Then, the high resolution global carbon assimilation system coupled with an ecological model will be constructed. This system is able to assimilate jointly multisource observation data and to optimize key model parameters, photosynthesis and respiration carbon fluxes of global terrestrial ecosystems, and anthropogenic carbon emission fluxes of key regions. This system will be used to study quantitatively the spatial and temporal patterns of carbon fluxes of global terrestrial ecosystems and anthropogenic carbon emission fluxes of key regions and to identify the mechanisms driving the global terrestrial carbon sinks and sources. The outputs of this study will be helpful for the fulfillment of the key research and development programs for global change and adaptation and provide valuable data and technical support for the decision-making in China.