Recent progress and application on seismic isolation energy dissipation and control for structures in China

China is a country where 100% of the territory is located in a seismic zone. Most of the strong earthquakes are over prediction. Most fatalities are caused by structural collapse. Earthquakes not only cause severe damage to structures, but can also damage non-structural elements on and inside of facilities. This can halt city life, and disrupt hospitals, airports, bridges, power plants, and other infrastructure. Designers need to use new techniques to protect structures and facilities inside. Isolation, energy dissipation and, control systems are more and more widely used in recent years in China. Currently, there are nearly 6,500 structures with isolation and about 3,000 structures with passive energy dissipation or hybrid control in China. The mitigation techniques are applied to structures like residential buildings, large or complex structures, bridges, underwater tunnels, historical or cultural relic sites, and industrial facilities, and are used for retrofitting of existed structures. This paper introduces design rules and some new and innovative devices for seismic isolation, energy dissipation and hybrid control for civil and industrial structures. This paper also discusses the development trends for seismic resistance, seismic isolation, passive and active control techniques for the future in China and in the world.     

Brittleness characteristics of tight oil siltstones

Rock brittleness directly affects reservoir fracturing and its evaluation is essential for establishing fracturing conditions prior to reservoir reforming. Dynamic and static brittleness data were collected from siltstones of the Qingshankou Formation in Songliao Basin. The brittle–plastic transition was investigated based on the stress–strain relation. The results suggest that the brittleness indices calculated by static elastic parameters are negatively correlated with the stress drop coefficient and the brittleness index B₂, defined as the average of the normalized Young’s modulus and Poisson’s ratio, is strongly correlated with the stress drop. The brittleness index B₂, Young’s modulus, and Poisson’s ratio correlate with the brittle minerals content; that is, quartz, carbonates, and pyrite. We also investigated the correlation between pore fluid and porosity and dynamic brittle characteristic based on index B₂. Pore fluid increases the plasticity of rock and reduces brittleness; moreover, with increasing porosity, rock brittleness decreases. The gas-saturated siltstone brittleness index is higher than that in oil- or water-saturated siltstone; the difference in the brittleness indices of oil- and water-saturated siltstone is very small. By comparing the rock mechanics and ultrasonic experiments, we find that the brittleness index obtained from the rock mechanics experiments is smaller than that obtained from the ultrasonic experiments; nevertheless, both decrease with increasing porosity as well as their differences. Ultrasonic waves propagate through the rock specimens without affecting them, whereas rock mechanics experiments are destructive and induce microcracking and porosity increases; consequently, the brittleness of low-porosity rocks is affected by the formation of internal microcrack systems.     

Assessment and zonation of storm surge hazards in the coastal areas of China

Natural Hazards - Coastal inundation due to storm tides is computed using ADvanced CIRCulation (ADCIRC) model along the east coast of India. Inland inundation due to storm tides is calculated every...     

Optimal design of SDOF envelope systems for the responses of MDOF dynamic systems

The concept of envelope system for a given dynamic system is proposed in this paper which refers to those systems whose module of transfer function in the whole range of frequency domain is always bigger than that of a given system. This concept opens a new way to study the problems of robust design and modelling for dynamic systems. The condition that an envelope system has to satisfy is rendered as the determination of the positiveness of a real polynomial function and Sturm's sequence method is used to establish an easily implemented criterion for evaluating the positiveness of the polynomial in terms of its coefficients. The optimization for the envelope system is expressed as the minimization of the 2-norm of its transfer function and simplex method is employed to search for the optimal solution. Two dynamic systems are used to illustrate the optimal design for the envelope systems of some of their responses. © 1998 John Wiley & Sons, Ltd.     

SPATIAL VARIATION OF Zn GEOCHEMICAL FRACTIONS IN THE SURFACE SEDIMENTS OF THE STRAITS OF MALACCA: NATURAL OR ANTHROPOGENIC?

1INTRODUCTION Studiesonheavymetalcontaminationinsedi mentshavealwaysbeenfocusedonthecoastalandin tertidalareas(Sivalingam,etal.,1980;Ismail,1993;Ismail,etal.,1993;IsmailandRosniza,1997;Yap,etal.,2002a,2002b).Theheavymet alconcentrationsfoundinthesediments…     

Seismic fracture evaluation of diaphragm joints in welded beam-to-box column moment connections

Steel box columns are widely used in steel building structures in Taiwan due to their dual strong axes. To transfer the beam-end moment to the column, diaphragm plates of the same thickness and elevations as the beam flanges are usually welded inside the box column. The electro-slag welding (ESW) process is widely used to connect the diaphragms to the column flanges in Taiwan because of its convenience and efficiency. However, ESW may increase the hardness of the welds and heat-affected zones (HAZs), while reducing the Charpy-V notch strength in the HAZ. This situation can cause premature fracture of the diaphragm-to-column flange welds before a large plastic rotation is developed in the beam-to-box column joints. To quantify the critical eccentricity and the effectiveness of fracture prediction, this study uses fracture prediction models and finite element model (FEM) analysis to correlate the test results. In this study, two beam-to-box column connection subassembly tests are conducted with different loading protocols and ESW chamber shapes. To implement a fracture prediction model, the material parameters are established from circumferential notched tensile tests and FEM analysis. Test results indicate that the fracture instances can be predicted on the basis of the cumulative plastic deformation in the HAZs. Analytical results indicate that fracture instances and locations are sensitive to the relative locations of the ESW joints and beam flange. Tests also confirm that the possible fracture of the diaphragm-to-column flange joints can be mitigated by enlarging the chamber of the ESW joint.     

基于ShakeMap_CNST的2017年精河6.6级地震灾害快速评估

基于考虑区域地震动衰减关系、场地效应及震中破裂等多因素的烈度快速评估模型,结合震害预测方法,研发了一套震害预测系统,并以2017年8月9日精河M_S6.6地震的震害预测为例,将对其的预测结果与当前主流系统进行对比。结果表明,采用ShakeMap_CNST系统能对地震的影响范围和烈度进行更为准确的估计,在人员伤亡、受灾人口估计、紧急安置人数及经济损失评估等方面,相对于其他系统,本系统的结果与现场调查的结果更为接近。     

Full moment tensor inversion constrained by double-couple focal mechanism for induced seismicity*

In this study, we propose a new method to determine full moment tensor solution for induced seismicity. This method generalizes the full waveform matching algorithm we have developed to determine the double-couple (DC) focal mechanism based on the neighbourhood algorithm. One major difference between the new method and the former one is that we adopt a new misfit function to constrain the candidate moment tensor solutions with respect to a reference DC solution in addition to other misfit terms characterizing the waveform matching. Through synthetic tests using a real passive seismic survey geometry, the results show the new constraint can help better recover the DC components of inverted moment tensors. We further investigate how errors in the velocity model and source location affect the moment tensor solution. The synthetic test results indicate that the constrained inversion is robust in recovering both the DC and non-DC components. We also test the proposed method on several real induced events in an oil/gas field in Oman using the same observation system as synthetic tests. While it is found that the full moment tensor solutions without using the DC constraints have much larger non-DC components than solutions with the DC constraints, both solutions are able to fit the observed waveforms at similar levels. The synthetic and real test results suggest the proposed DC constrained inversion method can reliably retrieve full moment tensor solutions for the induced seismicity.     

气候系统模式对于北极海冰模拟分析

利用全球耦合模式对比计划第五阶段(CMIP5)模拟试验的结果,并与观测资料对比分析,评估了CMIP5模式对北极海冰的模拟效果。结果表明:多数模式可以较好地模拟出北极海冰的空间分布以及季节变化特征。1979—2005年北极海冰迅速减少,所有模式均模拟出北极海冰减少的趋势,但减少趋势大小与观测差别较大。在全球变化的背景下,全球地表气温升高1℃,北极海冰的面积减少1.02×106km2,而在模式中减少的北极海冰面积在0.62×106—1.68×106km2之间,说明模式对于北极海冰的模拟仍然存在很多不确定性。