上覆硬质保护层海底管道检测技术探讨

海底管道在油气工业中发挥着重要作用,为保障其安全运营必须定期进行检测掌握其在海底的状态。有的海底管道在铺设时为其安全考虑,在海底管道上方覆盖了抛石等硬质保护层,这样就导致在海底管道定期检测时一些检测仪器难以探测到硬质保护层下海底管道的位置和埋深,而浅地层剖面仪和磁力仪仍然可以不同程度地实现这种情况下的海底管道检测。文中对浅地层剖面仪和磁力仪的原理进行了介绍并对其在上覆抛石等硬质保护层海底管道检测中的应用进行了分析探讨。分析结果表明浅地层剖面仪和磁力仪组成的综合检测系统对上覆硬质保护层的海底管道探测有一定效果,可查明海硬质保护层下海底管道的位置和埋深,为海底管道的安全管理和维护提供数据支持,也可为其他类似海底管道检测提供参考。     

The prediction of traveling jet trenching in stiff clay based on the erosion failure mechanism

The performance of traveling jet trenching in stiff clay was tested. All the key parameters varied in the experiment, including the jet velocity, the shear strength of clay, the diameter of the nozzle, and the translational velocity of the nozzle. The jet–soil interface was found to be an arc. An equation was given to describe the interface. On the basis of the erosion failure mechanism, a new method is presented for predicting jet trenching depth. We first calculated the trajectory of the jet–soil interface and then predicted the distribution of the boundary layer shear stress along the jet–soil interface. The point where the wall shear stress was equal to the critical shear strength of clay was the ultimate trenching depth. The predictive results were found to fit the experimental results well.     

生物型凹凸棒基高分子固沙材料的复配效果

由于具有提高沙土的稳定性和保水性等特征,复合高吸水性固沙材料在荒漠化土地治理方面具有一定的潜力和应用前景。研究了蓝藻结皮在不同比例凹凸棒基高分子固沙材料中的生长状态和生理特性。结果表明:蓝藻结皮与经4 mol·L^-1硫酸改性后的凹凸棒基高分子固沙材料以1∶3质量比配比生长情况最佳;比较了复配材料喷洒量为400、500g·m^-2处理下蓝藻叶绿素a、丙二醛、可溶性蛋白及可溶性糖含量等生理指标,喷洒量为500 g·5m^-2的蓝藻结皮与经4 mol·L^-1硫酸改性后的凹凸棒基高分子固沙材料生理特性较好。     

毛乌素沙地砒砂岩与沙复配农田的固沙效应及其微观机理

砒砂岩与沙复配成土及其工程化核心技术的提出与应用,为毛乌素沙地合理利用土地资源、科学推进生态建设提供了新的思路与技术支撑。前期研究对利用层面的技术问题给予了较多关注并取得显著进展,而在潜在风险层面特别是关于复配土壤的固沙效应及其微观机理的探索则相对薄弱。基于集沙仪、扫描电镜及激光粒度仪,结合野外定位试验和室内仪器观测,对毛乌素典型原状沙地及复配农田的输沙特征差异及其固沙微观机理进行探索。结果表明：（1）观测周期内,原状沙地输沙总量为4 951 g,远高于复配农田2 436 g的输沙总量,原状沙地更易受风蚀,而复配农田土壤起沙风速大、输沙量较小,具有明显的固沙效应;（2）扫描电镜图像显示,原状沙地土粒（沙粒）粗骨化、无粘结,而耕种两年的复配农田土壤中已出现团聚体;（3）激光粒度仪分析显示,原状沙地的粉、黏粒含量仅为2.74%,而复配农田这一比例增至15.12%;（4）复配土防风固沙效应的形成与粉粒和黏粒含量及土壤结构等紧密相关。鉴于复配农田输沙固沙能力的动态差异性和风力敏感性,进一步实施复配成土造田工程时,宜在复配农田主导风向的上风向区域及成片农田内适当布设具有防风功能的适生草类或灌木条带。     

Experimental study on the vertical deformation of aquifer soils under conditions of withdrawing and recharging of groundwater in Tongchuan region,China

Land subsidence due to aquifer-system compaction accompanying groundwater extraction is a global hazard. Rising urban construction and groundwater demand necessitate increased awareness and better understanding of the geological problem. Motivated by the lack of laboratory-scale studies on this issue, an experimental investigation on the newly developed Tongchuan region, China, is presented. The study addresses the deformation behaviors of three soil samples, with the lithology of silty clay, silt, and fine sand, under the conditions of groundwater withdrawal and recharge using the GDS Consolidation Testing System. Results indicate that all three samples were characterized by elastic–plastic deformation under the conditions of withdrawing and recharging. The vertical deformation of the silty clay in the aquitard above the first confined aquifer was larger than those of the other two samples, and its deformation is a gradual and long process; thus, considerable attention should be paid to deformation in this aquitard due to the apparent creep effect and tiny rebound deformation. However, the settlement of the fine sand in the second confined aquifer cannot be ignored due to the great thickness of the aquifer. For the same soil, as the pore-water pressure declined, the unit rate of vertical deformation decreased gradually, whereas the creep effect of deformation in the later declining stage of pore-water pressure was more apparent than that in the former declining stage. These observations are highly important to the local government, which is developing measures to prevent and control subsidence.     

Lithofacies paleogeography mapping and reservoir prediction in tight sandstone strata: A case study from central Sichuan Basin,China

Sand-rich tight sandstone reservoirs are potential areas for oil and gas exploration. However, the high ratio of sandstone thickness to that of the strata in the formation poses many challenges and uncertainties to traditional lithofacies paleogeography mapping. Therefore, the prediction of reservoir sweet spots has remained problematic in the field of petroleum exploration. This study provides new insight into resolving this problem, based on the analyses of depositional characteristics of a typical modern sand-rich formation in a shallow braided river delta of the central Sichuan Basin, China. The varieties of sand-rich strata in the braided river delta environment include primary braided channels, secondary distributary channels and the distribution of sediments is controlled by the successive superposed strata deposited in paleogeomorphic valleys. The primary distributary channels have stronger hydrodynamic forces with higher proportions of coarse sand deposits than the secondary distributary channels. Therefore, lithofacies paleogeography mapping is controlled by the geomorphology, valley locations, and the migration of channels. We reconstructed the paleogeomorphology and valley systems that existed prior to the deposition of the Xujiahe Formation. Following this, rock-electro identification model for coarse skeletal sand bodies was constructed based on coring data. The results suggest that skeletal sand bodies in primary distributary channels occur mainly in the valleys and low-lying areas, whereas secondary distributary channels and fine deposits generally occur in the highland areas. The thickness distribution of skeletal sand bodies and lithofacies paleogeography map indicate a positive correlation in primary distributary channels and reservoir thickness. A significant correlation exists between different sedimentary facies and petrophysical properties. In addition, the degree of reservoir development in different sedimentary facies indicates that the mapping method reliably predicts the distribution of sweet spots. The application and understanding of the mapping method provide a reference for exploring tight sandstone reservoirs on a regional basis.     

Evaluating relationships between soil chemical properties and vegetation cover at different slope aspects in a reclaimed dump

Conducting research about the relationships between soil chemical properties and vegetation coverage at different slope aspects is especially important in reconstructed ecosystems of vulnerable ecological regions. This study was conducted in the first reclaimed dump within the Pingshuo mining area of Shanxi Province, China, to analyze patterns of soil chemical properties (soil organic matter (SOM), soil total nitrogen (STN), soil available phosphorus (SAP) and soil available potassium (SAp) and vegetation coverage (NDVI) and their correlations at different slope aspects. In the reclaimed dump, 26 quadrats were established along four slope aspects (i.e., shady, semi-shady, sunny and semi-sunny slopes). There was no significant difference in SOM or STN among different slope aspects, while SAP differed between shady slopes compared to semi-shady, sunny and semi-sunny slopes; SAP differed significantly between semi-shady and semi-sunny slopes. The NDVI of semi-sunny slopes differed significantly from that of the other three aspects. There was variation in the relationships between NDVI and soil chemical properties, depending on the slope aspects. The logarithm of SOM and NDVI was related linearly on shady and semi-shady slopes, while NDVI was inversely related to the natural logarithm of the logarithm of SOM on sunny and semi-sunny slopes. STN and NDVI had a first-order function relationship on shady and semi-shady slopes, yet a quadratic function relationship on sunny and semi-sunny slopes. The relationships between SAP and NDVI were inverse on all types of slopes. On shady and semi-shady slopes, NDVI had a quadratic relationship with the logarithm of SAp, but it was well fitted by using a cubic function on sunny and semi-sunny slopes. The sensitivity coefficients of soil chemical properties and NDVI were different, and soil chemical properties changed differently depending on changes in NDVI at different slope aspects.     

Full probabilistic design of slopes in spatially variable soils using simplified reliability analysis method

ABSTRACT

A simplified reliability analysis method is proposed for efficient full probabilistic design of soil slopes in spatially variable soils. The soil slope is viewed as a series system comprised of numerous potential slip surfaces and the spatial variability of soil properties is modelled by the spatial averaging technique along potential slip surfaces. The proposed approach not only provides sufficiently accurate reliability estimates of slope stability, but also significantly improves the computational efficiency of soil slope design in comparison with simulation-based full probabilistic design. It is found that the spatial variability has considerable effects on the optimal slope design.     

浅析测绘地理信息业务档案异地备份方案

对测绘地理信息业务档案的异地备份方案进行了具体分析,指出了测绘地理信息业务档案异地备份工作的重要性,分析了该工作目前面临的困难,提出了具体的实施方案,并对北京市的成功案例进行了总结和分析。     

Seismic design and testing of buckling‐restrained braces with a thin profile

A thin‐profile buckling‐restrained brace (thin‐BRB) consists of a rectangular steel casing and a flat steel core that is parallel to a gusset plate. A thin configuration reduces the width of the restraining member and thus saves usable space in buildings. However, deformable debonding layers, which cover the steel core plate in order to mitigate the difference between the peak tensile and compressive axial forces, provide a space for the steel core to form high mode buckling waves when the thin‐BRB is under compression. The wave crests squeeze the debonding layers and produce outward forces on the inner surface of the restraining member. If the restraining member is too weak in sustaining the outward forces, local bulging failure occurs and the thin‐BRB loses its compression capacity immediately. In order to investigate local bulging behavior, a total of 22 thin‐BRB specimens with a ratio of steel core plate to restraining steel tube depth ranging from 0.3 to 0.7 and axial yield force capacities ranging from 421 kN to 3036 kN were tested by applying either cyclically increasing, decreasing, or constant axial strains. The restraining steel tube widths of all the specimens were smaller than 200 mm and were infilled with mortar with a compressive strength of 97 MPa or 55 MPa. Thirteen of the 22 thin‐BRB specimens' restraining members bulged out when the compressive core strains exceeded 0.03. A seismic design method of the thin‐BRB in preventing local bulging failure is proposed in this study. Test and finite element model (FEM) analysis results suggest that the outward forces can be estimated according to the BRB compressive strength, steel core high mode buckling wavelength, and the debonding layer thickness. In addition, the capacity of the restraining member in resisting the outward forces can be estimated by using the upper bound theory in plastic analysis. Both the FEM analysis and test results indicate that the proposed method is effective in predicting the possibility of local bulging failure. Test results indicate that the proposed design method is conservative for thin‐BRB specimens with a large steel core plate to restraining steel tube depth ratio. This paper concludes with design recommendations for thin‐BRBs for severe seismic services. Copyright © 2015 John Wiley & Sons, Ltd.