Performance and Early Results from the Golf Instrument Flown on the Soho Mission

GOLF in-flight commissioning and calibration was carried out during the first four months, most of which represented the cruise phase of SOHO towards its final L1 orbit. The initial performance of GOLF is shown to be within the design specification, for the entire instrument as well as for the separate sub-systems. Malfunctioning of the polarising mechanisms after 3 to 4 months operation has led to the adoption of an unplanned operating sequence in which these mechanisms are no longer used. This mode, which measures only the blue wing of the solar sodium lines, detracts little from the detection and frequency measurements of global oscillations, but does make more difficult the absolute velocity calibration, which is currently of the order of 20%. Data continuity in the new mode is extremely high and the instrument is producing exceptionally noise-free p-mode spectra. The data set is particularly well suited to the study of effects due to the excitation mechanism of the modes, leading to temporal variations in their amplitudes. The g modes have not yet been detected in this limited data set. In the present mode of operation, there are no indications of any degradation which would limit the use of GOLF for up to 6 years or more.     

Highly magnetised and differentiated basalts at the 18–19° S propagating spreading centre in the North Fiji Basin

Geochemical and magnetic properties of basalts dredged along a propagating spreading centre (central part of the North Fiji Basin) have been analysed. Two phenomena appear to be important in controlling variations of natural remanent magnetisation (NRM): 1) an extensive magma differentiation to Fe-Ti basalts increases with the intensity of NRM; and both increase towards the propagator tip, 2) low temperature oxidation (maghemitisation) seems to have already occurred along the ridge axis for the zero age basalts. This paper shows that despite the apparent lack of correlation between NRM and the maghemitisation process (masked by the effect of extensive magma differentiation), the latter involves a change of the domain state of magnetic carriers, from pseudo single-domain to single-domain. We separated the NRM into 4 partial NRMs (pNRM) depending on the coercivity of grains. This analysis showed that the contribution to the remanence of grains with high coercivity increases with maghemitisation, whereas the contribution of grains with weak coercivity decreases.Despite the relatively high degree of maghemitisation, the variations of natural remanent magnetisation intensity principally reflect the variations of magmatic processes. This joint work on magnetic and magmatic properties of basalts collected on the NS-propagating spreading centre from the North Fiji Basin reinforces the magnetic telechemistry hypothesis of Vogt (1979).     

From strike-slip faulting to oblique subduction: A survey of the Alpine Fault-Puysegur Trench transition,New Zealand,results of cruise Geodynz-sud leg 2

The Geodynz-sud cruise on board the R/V l'Atalante collected bathymetric, side-scan sonar and seismic reflection data along the obliquely convergent boundary between the Australian and Pacific plates southwest of the South Island, New Zealand. The survey area extended from 44°05 S to 49°40 S, covering the transition zone between the offshore extension of the Alpine Fault and the Puysegur Trench and Puysegur Ridge. Based on variations in the nature and structure of the crust on either side of the margin, the plate boundary zone can be divided into three domains with distinctive structural and sedimentary characteristics. The northern domain involves subduction of probably thinned continental crust of the southern Challenger Plateau beneath the continental crust of Fiordland. It is characterized by thick sediments on the downgoing slab and a steep continental slope disrupted by fault scarps and canyons. The middle domain marks the transition between subduction of likely continental and oceanic crust defined by a series of en echelon ridges on the downgoing slab. This domain is characterized by a large collapse terrace on the continental slope which appears to be due to the collision of the en echelon ridges with the plate margin. The southern domain involves subduction of oceanic crust beneath continental and oceanic crust. This domain is characterized by exposed fabric of seafloor spreading on the downgoing slab, a steep inner trench wall and linear ridges and valleys on the Puysegur ridge crest. The data collected on this cruise provide insights into the nature and history of both plates, and factors influencing the distribution of strike-slip and compressive strain and the evolution of subduction processes along a highly oblique convergent margin.     

A song of volumes,surfaces and fluxes: The case study of the Central Mallorca Depression (Balearic Promontory) during the Messinian Salinity Crisis

The Central Mallorca Depression (CMD) located in the Balearic Promontory (Western Mediterranean) contains a well-preserved evaporitic sequence belonging to the Messinian Salinity Crisis (MSC) salt giant, densely covered by high- and low-resolution seismic reflection data. It has been proposed recently that the MSC evaporitic sequence in the CMD could be a non-deformed analogue of the key MSC area represented by the Caltanissetta Basin in Sicily. This presumed similarity makes the CMD an interesting system to better understand the MSC events. Physics-based box models of the water mixing between sub-basins, built on conservation of mass of water and salt, help constrain the hydrological conditions under which evaporites formed during the MSC. Those models have been widely used in the literature of the MSC in the past two decades. They have been mostly applied to the Mediterranean Sea as a whole focusing on the Mediterranean–Atlantic connection, or focusing on the influence of the Sicily Sill connecting the Western and Eastern Mediterranean Sea. In this study, we apply a downscaled version of such modelling technique to the CMD. First, we quantify the present-day volumes of the MSC units. We then use a reconstructed pre-MSC paleo-bathymetry to model salinity changes as a function of flux exchanges between the CMD and the Mediterranean. We show that a persistent connection between the CMD and the Mediterranean brine near gypsum saturation can explain volume of Primary Lower Gypsum under a sea level similar to the present. For the halite, on the contrary, we show that the observed halite volume cannot be deposited from a connected CMD-Mediterranean scenario, suggesting a drawdown of at least 850 m (sill depth) is necessary. Comparison between the deep basin halite volume and that of the CMD shows that it is possible to obtain the observed halite volume in both basins from a disconnected Mediterranean basin undergoing drawdown, although determining the average salinity of the Western Mediterranean basin at the onset of drawdown requires further investigation.     

An individual-based model study of anchovy early life history in the northern Humboldt Current system

We used an individual-based model of anchovy (Engraulis ringens) early life history coupled with hydrodynamic outputs from the regional oceanic modeling system (ROMS) to investigate the factors driving variability in egg and larval survival rates in the northern Humboldt upwelling region off Peru. Individuals were released within a coastal area and followed for a period of 30 days. Those that were still in the coastal area at that time were considered as retained. We investigated the spatial and temporal variability in the release locations of the individuals retained, and compared these to observed egg concentration patterns reconstructed from a 40-year period of monitoring. A first set of simulations using passive particles to represent anchovy eggs and larvae revealed a large sensitivity of the results to the initial vertical distribution of particles. We then conducted two additional sets of simulations that included the effect of egg buoyancy, larval vertical swimming behavior and lethal temperature. We obtained (1) maximal coastal retention close to the surface in winter and in deeper layers in summer, (2) a large influence of egg buoyancy and of larval vertical behavior on coastal retention in all seasons, (3) a partial match between dates and locations of enhanced retention and observed egg concentration patterns and (4) a low effect of lethal temperature on survival except when associated with high egg density. The model suggests that an optimal temporal spawning pattern for maximizing coastal retention would have two maximums, the most significant in austral winter and the second in summer. This pattern agrees roughly with observed spawning seasonality, but with temporal discrepancy of about two months in the peaks of both series. Spatially, we obtained higher retention from 10 S to 20 S, whereas the observed maximum egg concentration was located between 6°S and 14°S. Among the three sets of simulations, the one taking into account larval vertical swimming behavior lead to the best match with the data.     

The influence of pull-out load on the efficiency of jetting during spudcan extraction

Mobile jack-up drilling rigs are deployed at many locations during their service life. This necessitates retrieval of the platform’s legs and spudcan footings before the rig move. In soft soils, where the spudcans embed deeply, the extraction process can be difficult, time consuming and therefore costly. Water jetting systems, devised to ease spudcan extraction, are a common feature on modern jack-up units. However, their effectiveness in reducing the pull-out load required is questioned by the offshore industry. To investigate their efficiency, centrifuge experiments of a reduced scale spudcan model with jets have been performed at the University of Western Australia. The footing was extracted from penetrations of up to 1.5 diameters in normally consolidated clay. Similar to spudcan extraction in the field, these were carried out under load control, applying a constant extraction force. Both influences of pull-out load magnitude and jetting flow rate were investigated. The study demonstrates that jetting is efficient in facilitating spudcan extraction, as it reduces the required uplift load. Practical guidance is provided in applying the results to field conditions.     

39Ar-40Ar systematics of two millimeter-sized rock fragments from Mare Crisium

Two small fragments, L24B, a glass-rich agglutinate (1.9 mg) and L24A, a fine-grained lithic fragment (9.4 mg), from the Luna 24 landing site have been neutron irradiated for the purpose of³⁹Ar-⁴⁰Ar dating. A fairly well-defined³⁹Ar-⁴⁰Ar plateau age of 3.65 ± 0.12 AE was found for the larger fragment. After appropriate corrections the composition of the trapped and spallogenic Ar could be deciphered. The evolution of³⁸Ar_sp/³⁷Ar showed that 660 m.y. and 500 m.y. were the most reliable exposure ages for L24A and L24B, respectively. The Ti contents of ≤0.6% determined by gamma-counting prior to the Ar analysis indicate both fragments being associated with the group of low-Ti or even very low-Ti basalts.     

87Rb87Sr age of soils and rock from Mare Crisium Luna 24

The soil and one gabbroic fragment from Mare Crisium, brought back by the Luna-24 mission, have been measured through the ⁸⁷Rb/⁸⁷Sr method. The soil is one of the least radiogenic from the moon, comparable with Luna-16 soils. The gabbroic rock, which has a very low Rb/Sr ratio, gives an internal isochron age of 3.74 ± 0.58 Ga and an initial Sr ratio of 0.699085 ± 0.000070.