Late Quaternary growth and decay of the Svalbard/Barents Sea ice sheet and paleoceanographic evolution in the adjacent Arctic Ocean

 The paleoceanography in the Nordic seas was characterized by apparently repeated switching on and off of Atlantic water advection. In contrast, a continous influx of Atlantic waters probably occurred along the northern Barents Sea margin during the last 150 ka. Temporary ice-free conditions enhanced by subsurface Atlantic water advection and coastal polynyas accelerated the final ice sheet build-up during glacial times. The virtually complete dissolution of biogenic calcite during interglacial intervals was controlled mainly by CO₂-rich bottom waters and oxidation of higher levels of marine organic carbon and indicates intensive Atlantic water inflow and a stable ice margin. Received: 25 February 1997 / Revision received: 4 March 1998     

Sediment magnetic properties reveal holocene climate change along the Minnesota prairie-forest ecotone

We propose a model that explains variations in magnetic parameters of lake sediments as a record of Holocene climate change. Our model is based on records from 4 lakes and incorporates the effects of erosion, dust deposition, and the authigenesis and diagenesis of the magnetic component of the sediment. Once checked against high resolution multi proxy climate records, which are currently being established for some of our study sites, it will allow us to use magnetic proxies to establish high-resolution climate reconstructions on a regional scale.Our model utilizes a combination of concentration-dependent parameters (magnetic susceptibility, IRM) and grain-size-dependent parameters (ARM/IRM, hysteresis parameters). Magnetic mineralogy is characterized by a combination of low-temperature measurements and S-ratios, and our magnetic measurements are complemented by XRD, LOI and smearslide analyses.During periods of forest growth within the watershed, deposition of terrigenous material is low and the sediment magnetic properties are characterized by low concentrations of mainly authigenic minerals (low values of IRM, high ratios of ARM/IRM). During the early to mid-Holocene dry period, deposition of terrigenous material increased due to intensified dust deposition and the erosion of lake margins caused by lowered water levels. Concentration of magnetic minerals increases (high IRM, ) and so does the grain-size of the magnetic fraction (low ARM/IRM). During the late-Holocene, sediment magnetic properties depend on the varied position of the site with respect to the prairie–forest ecotone.     

Upscaling permeability for three-dimensional fractured porous rocks with the multiple boundary method

Upscaling permeability of grid blocks is crucial for groundwater models. A novel upscaling method for three-dimensional fractured porous rocks is presented. The objective of the study was to compare this method with the commonly used Oda upscaling method and the volume averaging method. First, the multiple boundary method and its computational framework were defined for three-dimensional stochastic fracture networks. Then, the different upscaling methods were compared for a set of rotated fractures, for tortuous fractures, and for two discrete fracture networks. The results computed by the multiple boundary method are comparable with those of the other two methods and fit best the analytical solution for a set of rotated fractures. The errors in flow rate of the equivalent fracture model decrease when using the multiple boundary method. Furthermore, the errors of the equivalent fracture models increase from well-connected fracture networks to poorly connected ones. Finally, the diagonal components of the equivalent permeability tensors tend to follow a normal or log-normal distribution for the well-connected fracture network model with infinite fracture size. By contrast, they exhibit a power-law distribution for the poorly connected fracture network with multiple scale fractures. The study demonstrates the accuracy and the flexibility of the multiple boundary upscaling concept. This makes it attractive for being incorporated into any existing flow-based upscaling procedures, which helps in reducing the uncertainty of groundwater models.     

Geochemical environment of Cenomanian - Turonian black shale deposition at Wunstorf (northern Germany)

Major- and minor- element determinations were carried out on a high-resolution sample set obtained from a sediment drill core at Wunstorf (N. Germany). This study interval includes the black shale-bearing Hesseltal Formation associated with the Oceanic Anoxic Event 2 (OAE 2), also referred to as Cenomanian-Turonian Boundary Event (CTBE). Seven black shale packages, each containing several black shale layers, were defined by elevated TOC values, with black shale packages 1-4 deposited during OAE 2. Packages 5-7 extend above the level of the positive carbon-isotope excursion defining OAE 2, indicating that conditions favouring organic carbon burial must have prevailed longer in the Wunstorf Basin than elsewhere. Geochemical analyses revealed no significant differences between black shale packages deposited during and after OAE 2. Enrichment patterns of sulphur, iron and redox-sensitive and sulphide-forming trace metals point to suboxic to anoxic conditions existing at the sediment-water interface during black shale deposition, whereas sulphidic conditions prevailed deeper in the sediment. Variations in element/Al ratios follow cyclic patterns which are interpreted to represent climatically-induced changes in sediment supply. Reduced vertical mixing led to water-column stratification and caused black shale deposition.     

GPS radio holography as a tool for remote sensing of the atmosphere, mesosphere, and terrestrial surface from space

GPS radio occultation (RO) signals are highly coherent and precise, and thus sufficient for holographic investigation of the atmosphere, ionosphere, and the Earth's surface from space. In principle, three-dimensional radio-holographic remote sensing is possible by using new radio holographic equations to retrieve the radio field within the atmosphere from a radio field known at some interface outside the atmosphere. A simplified two-dimensional form of the radio-holographic equations which are developed under an assumption of local spherical symmetry can be used to obtain two-dimensional radio images of the atmosphere and terrestrial surface. To achieve this, radio holograms recorded by a GPS receiver onboard a low earth orbit (LEO) satellite at two GPS frequencies can be used and focused synthetic aperture principle applied. Analysis of GPS/MET RO data is presented to show the effectiveness of a radio-holographic approach. It is shown that the amplitude of GPS radio signals (in addition to phase data) can be used to obtain detailed altitude profiles of the vertical gradient of refractivity in the atmosphere and electron density in the mesosphere. The results demonstrate the applicability of GPS radio holography for a detailed global study of the natural processes in the atmosphere and mesosphere. Electronic Publication     

Simulated decadal oscillations of the Atlantic meridional overturning circulation in a cold climate state

The significance of the Atlantic meridional overturning circulation (MOC) for regional and hemispheric climate change requires a complete understanding using fully coupled climate models. Here we present a persistent, decadal oscillation in a coupled atmosphere–ocean general circulation model. While the present study is limited by the lack of comparisons with paleo-proxy records, the purpose is to reveal a new theoretically interesting solution found in the fully-coupled climate model. The model exhibits two multi-century-long stable states with one dominated by decadal MOC oscillations. The oscillations involve an interaction between anomalous advective transport of salt and surface density in the North Atlantic subpolar gyre. Their time scale is fundamentally determined by the advection. In addition, there is a link between the MOC oscillations and North Atlantic Oscillation (NAO)-like sea level pressure anomalies. The analysis suggests an interaction between the NAO and an anomalous subpolar gyre circulation in which sea ice near and south of the Labrador Sea plays an important role in generating a large local thermal anomaly and a meridional temperature gradient. The latter induces a positive feedback via synoptic eddy activity in the atmosphere. In addition, the oscillation only appears when the Nordic Sea is completely covered by sea ice in winter, and deep convection is active only near the Irminger Sea. Such conditions are provided by a substantially colder North Atlantic climate than today.     

9: Processes of tectonism, magmatism and mineralization: Lessons from Europe

Metallogenic provinces in Europe range in age from the Archaean to the Neogene. Deposit types include porphyry copper and epithermal Cu–Au, volcanic-hosted massive sulphide (VMS), orogenic gold, Fe-oxide–Cu–Au, anorthosite Fe–Ti-oxide and sediment-hosted base-metal deposits. Most of them formed during short-lived magmatic events in a wide range of tectonic settings; many can be related to specific tectonic processes such as subduction, hinge retreat, accretion of island arcs, continental collision, lithosphere delamination or slab tear. In contrast, most sediment-hosted deposits in Europe evolved in extensional, continental settings over significant periods of time. In Europe, as elsewhere, ore formation is an integral part of the geodynamic evolution of the Earth's crust and mantle. Many tectonic settings create conditions conducive to the generation of water-rich magma, but the generation of ore deposits appears to be restricted to locations and short periods of change in temperature and stress, imposed by transitory plate motions. Crustal influence is evident in the strong structural controls on the location and morphology of many ore deposits in Europe. Crustal-scale fault–fracture systems, many involving strike-slip elements, have provided the fabric for major plumbing systems. Rapid uplift, as in metamorphic core complexes, and hydraulic fracturing can generate or focus magmatic–hydrothermal fluid flow that may be active for time spans significantly less than a million years. Once a hydrologically stable flow is established, ore formation is strongly dependent on the steep temperature and pressure gradients experienced by the fluid, particularly within the upper crust. In Europe, significant fracture porosity deep in the crystalline basement (1%) is not only important for magmatic–hydrothermal systems, but allows brines to circulate down through sedimentary basins and then episodically upward, expelled seismically to produce sediment-hosted base-metal deposits and Kupferschiefer copper deposits. Emerging research, stimulated by GEODE, can improve the predicting power of numerical simulations of ore-forming processes and help discover the presence of orebodies beneath barren overburden.     

Gold partitioning in melt-vapor-brine systems

We used laser-ablation inductively coupled plasma mass spectrometry to measure the solubility of gold in synthetic sulfur-free vapor and brine fluid inclusions in a vapor + brine + haplogranite + magnetite + gold metal assemblage. Experiments were conducted at 800°C, oxygen fugacity buffered at Ni-NiO (NNO), and pressures ranging from 110 to 145 MPa. The wt% NaCl eq. of vapor increases from 2.3 to 19 and that of brine decreases from 57 to 35 with increasing pressure. The composition of the vapors and brines are dominated by NaCl + KCl + FeCl₂ + H₂O. Gold concentrations in vapor and brine decrease from 36 to 5 and 50 to 28 μg/g, respectively, and the calculated vapor:brine partition coefficients for gold decrease from 0.72 to 0.17 as pressure decreases from 145 to 110 MPa. These data are consistent with the thermodynamic boundary condition that the concentration of gold in the vapor and brine must approach a common value as the critical pressure is approached along the 800°C isotherm in the NaCl-KCl-FeCl₂-HCl-H₂O system.We use the equilibrium constant for gold dissolution as AuOH⁰, extrapolated from lower temperature and overlapping pressure range, to calculate expected concentrations of AuOH⁰ in our experimental vapors. These calculations suggest that a significant quantity of gold in our experimental vapors is present as a non-hydroxide species. Possible chloridogold(I) species are hypothesized based on the positively correlated gold and chloride concentrations in our experimental vapors. The absolute concentration of gold in our synthetic vapor, brine, and melt and calculated mass partition coefficients for gold between these physicochemically distinct magmatic phases suggests that gold solubility in aqueous fluids is a function of aqueous phase salinity, specifically total chloride concentration, at magmatic conditions. However, though we highlight here the effect of salinity, the combination of our data with data sets from lower temperatures evinces a significant decrease in gold solubility as temperature drops from 800°C to 600°C. This decrease in solubility has implications for gold deposition from ascending magmatic fluids.