Spatio-Temporal Surface Shear-Stress Variability in Live Plant Canopies and Cube Arrays

This study presents spatiotemporally-resolved measurements of surface shear-stress τ _s in live plant canopies and rigid wooden cube arrays to identify the sheltering capability against sediment erosion of these different roughness elements. Live plants have highly irregular structures that can be extremely flexible and porous resulting in considerable changes to the drag and flow regimes relative to rigid imitations mainly used in other wind-tunnel studies. Mean velocity and kinematic Reynolds stress profiles show that well-developed natural boundary layers were generated above the 8 m long wind-tunnel test section covered with the roughness elements at four different roughness densities (λ = 0, 0.017, 0.08, 0.18). Speed-up around the cubes caused higher peak surface shear stress than in experiments with plants at all roughness densities, demonstrating the more effective sheltering ability of the plants. The sheltered areas in the lee of the plants are significantly narrower with higher surface shear stress than those found in the lee of the cubes, and are dependent on the wind speed due to the plants ability to streamline with the flow. This streamlining behaviour results in a decreasing sheltering effect at increasing wind speeds and in lower net turbulence production than in experiments with cubes. Turbulence intensity distributions suggest a suppression of horseshoe vortices in the plant case. Comparison of the surface shear-stress measurements with sediment erosion patterns shows that the fraction of time a threshold skin friction velocity is exceeded can be used to assess erosion of, and deposition on, that surface.     

Long-lived Coronal Loop Profiles from TRACE

An initial study of long-lived loops observed with TRACE (Lenz et al., 1999) shows that they have no significant temperature stratification and that they are denser than the classic loop model predicts. Models that agree better with the observations include a loop consisting of a bundle of filaments at different temperatures and a loop with momentum input by MHD waves. Some implications for coronal heating models and mechanisms are discussed.     

Atmospheric drag coefficients over sea ice — validation of a parameterisation concept

The concept of drag partitioning to parameterise the surface roughness of sea ice is validated using topography data of regions with high sea ice concentrations. The parameterised drag is compared to measurements obtained by aircraft and ship. The form drag can well be expressed as a function of mean ridge heights and spacings averaged over flight legs of 12 km, if an improved approximation for the coefficient of resistance of a single ridge is used. We find a good agreement between the parameterised and observed drag coefficients. The highest sea ice roughness was encountered close to coastal regions and the lowest in the central Arctic.     

Suevite breccia from the Ries crater,Germany: Origin,cooling history and devitrification of impact glasses

Abstract— The distribution and petrography of surficial suevite breccias of the Ries impact crater in Southern Germany are reviewed, and the morphology, petrography and chemical composition of impact glasses in suevite breccias and their postdepositional devitrification is synthesized. Origin and thermal history of suevite breccia and suevite glasses are inferred from these data and from recent results of cooling and crystallization experiments with suevite glass melts under controlled conditions. In a montmorillonitic groundmass, the suevite breccia contains pieces of glass, up to some decimeters in size, and crystalline rock clasts of all stages of shock metamorphism. The glass particles originated in impact melt of basement gneisses and cooled by adiabatic pressure release from ～80 GPa to atmospheric pressure during ejection from the crater. They were deposited on the ground together with the other suevite components at a temperature of ～750 °C. Fractured glass pieces in the breccia show that during deposition of the suevite the temperature was below the temperature at which undercooled melt transforms to rigid glass. The suevite cooled after deposition mainly by convection of heat by emanating gases and vapors. In chilled layers at the base and at the top of suevite deposits, the glasses are preserved in vitreous state. Between these zones, the glasses were devitrified, yet crystallization of pyroxene, plagioclase and magnetite took place below the glass-transformation temperature. Annealing experiments show that this unusual devitrification below the transformation temperature can be explained by the impact origin of suevite glasses. Due to rapid adiabatic cooling on decompression, the glasses were oversaturated with water and internally strained. Under these conditions, devitrification, especially the formation of plagioclase, was possible at temperatures below the transformation range. The origin from adiabatically cooled impact melt of deep-seated rocks distinguishes water-bearing suevite glasses from the Ries-derived, water-free moldavite tektites, which are interpreted as condensates of vaporized, surficial sediments (Engelhardt et al., 1987).     

Plate boundary deformation and continuing deflation of the Askja volcano,North Iceland,determined with GPS, 1987–1993

GPS geodetic measurements were conducted around the Askja central volcano located at the divergent plate boundary in north Iceland in 1987, 1990, 1992 and 1993. The accuracy of the 1987 and 1990 measurements is in the range of 10 mm for horizontal components; the accuracy of the 1992 and 1993 measurements is about 4 mm in the horizontal plane. Regional deformation in the Askja region is dominated by extension. Points located outside a 30–45 km wide plate boundary deformation zone indicate a displacement of 2.4±0.5 cm/a in the direction N 99°E±12° of the Eurasian plate relative to the North American plate in the period 1987–1990. Within the plate boundary deformation zone extensional strain accumulates at a rate of 0.8 strain/a. Displacement of control points next to Askja (>7 km from the caldera center) in the periods 1990–1993 and 1992–1993 show deflation and contraction towards the caldera. These results are in accordance with the results obtained by other geodetic methods in the area, which indicate that the deflation at Askja occurs in response to a pressure decrease at about 2.8 km depth, located close to the center of the main Askja caldera. A Mogi point source was fixed at this location and the GPS data used to solve for the source strength. A central subsidence of 11±2.5 cm in the period 1990–1993 is indicated, and 5.5±1.5 cm in the period 1992–1993. The maximum tensional strain rate, according to the point source model, occurs at a horizontal distance of 2.5–6 km from the source, at the same location as the main caldera boundary. Discrepancies between the observed displacements and predicted displacements from the Mogi model near the Askja caldera can be attributed to the regional eastwest extension that occurs at Askja.     

Soil column experiments to quantify vadose zone water fluxes in arid settings

For the determination of groundwater recharge processes in arid environments, vadose zone water fluxes and water storage should be considered. To better understand and quantify vadose zone processes influencing groundwater recharge, a soil column experimental setup has been developed that mimics arid atmospheric conditions and measures water and temperature fluxes in high temporal and spatial resolution. The focus of the experiment was on the determination of water infiltration, redistribution, evaporation and percolation under non-isothermal conditions. TDR rod sensors and a specific TDR “Taupe” cable sensor were used for water content measurements and allowed the infiltration fronts to be traced over the whole column length. Applying single irrigations of different amount and intensity showed the applicability of the experimental setup for the measurement of water movement in the unsaturated soil column.     

OpenGeoSys-ChemApp: a coupled simulator for reactive transport in multiphase systems and application to CO2 storage formation in Northern Germany

Sequestration of CO₂ into a deep geological reservoir causes a complex interaction of different processes such as multiphase flow, phase transition, multicomponent transport, and geochemical reactions between dissolved CO₂ and the mineral matrix of the porous medium. A prognosis of the reservoir behaviour and the feedback from large-scale geochemical alterations require efficient process-based numerical models. For this purpose, the multiphase flow and multicomponent transport code OpenGeoSys-Eclipse have been coupled to the geochemical model ChemApp. The newly developed coupled simulator was successfully verified for correctness and accuracy of the implemented reaction module by benchmarking tests. The code was then applied to assess the impact of geochemical reactions during CO₂ sequestration at a hypothetical but typical Bunter sandstone formation in the Northern German Basin. Injection and spreading of 1.48 × 10⁷ t of CO₂ in an anticline structure of the reservoir were simulated over a period of 20 years of injection plus 80 years of post-injection time. Equilibrium geochemical calculations performed by ChemApp show only a low reactivity to the geochemical system. The increased acidity of the aqueous solution results in dissolution of small amounts of calcite, anhydrite, and quartz. Geochemical alterations of the mineral phase composition result in slight increases in porosity and permeability, which locally may reach up to +0.02 and 0.1 %, respectively.