Geochronological arguments for a close relationship between surficial formation profiles and environmental crisis (c. 3000–2000 BP) in Gabon (Central Africa)

We present new ¹⁴C data on charcoal fragments recovered from the lower (coarse-grained Stone Line) and upper (fine-grained Cover Horizon) portions of surficial formation profiles in Gabon. These data and others compiled from the literature enable a reconstruction of the Upper Holocene geological regional history of Gabon. The connection between the geological events recorded in the surficial formations and the Upper Holocene environmental crisis is discussed and a scenario connecting geological events with climatic and environmental changes is proposed. Such a scenario suggests that following the climatic crisis, the reconstitution of soils by aeolian sedimentation could have been an important factor of Bantu expansion.     

Geologic factors controlling groundwater chemistry in the coastal aquifer system of Douala/Cameroon: implication for groundwater system functioning

Douala city, located in the littoral province of Cameroon, receives abundant rainfall quantities due to its geographical position in the Gulf of Guinea and bears considerable surface water and groundwater resources. Due to socioeconomic development and rapid demographic growth in the city and its consequences of unplanned urbanization and improper sanitation system, these water resources are poorly protected and managed. Streams in the Wouri watershed receive large amounts of wastewater discharge, and hundreds of boreholes have been drilled into the aquifer system without any management plan. A detailed hydrodynamic and hydrogeochemistry study in Douala town and its environs was conducted to get a better insight into the groundwater system functioning in order to provide information for the sustainable management and protection of the groundwater resource. Two field campaigns were carried out with 187 samples collected and analyzed for major ions, stable isotopes (¹⁸O, ²H), and tritium ³H. The results of the sampling have shown that the weathering of silicate minerals is the dominant geochemical process affecting groundwater chemistry in this system. However, acid rainfall in the humid climate has also caused carbonate mineral dissolution, amorphous silica deposition, and ion exchange reactions to occur in aquifers in the region. The various water types identified were categorized into four major clusters C1 to C4, based on the major ion composition and the local hydrogeological conditions. Environmental isotope data reveal that modern-to-submodern waters occur in the phreatic Quaternary/Mio-Pliocene and Oligocene/Upper Eocene aquifers, respectively. These results corroborate with the conceptual model built where modern groundwater types indicated silicate mineral weathering and calcite dissolution (C1 and C2), whereas submodern groundwater mostly showed silica deposition, ion exchange, and, to a lesser extent, carbonate mineral dissolution (C3 and C4). This improved understanding of the aquifer system functioning is essential to provide a reasonable basis for effective control measures and sustainable water management.     

Longitudinal Social Science Research in Natural Resource Communities: Lessons and Considerations

The majority of social science research is cross-sectional in nature, with data collected at a single point in time. However, social systems are dynamic and many of the variables of interest to social scientists may change over time. Longitudinal research methods enable data collection at two or more points in time among a population of interest to examine change in measured variables and influencing factors. Despite the opportunities it affords, longitudinal research is relatively uncommon in natural-resource-based social science research as compared to other fields (e.g., medical, criminal, education). We feel that the field of natural resource social science is ripe for a proliferation of longitudinal studies, now that a substantial body of cross-sectional data has been built. In the spirit of encouraging more of this type of research, we draw on our collective experiences in longitudinal studies to share lessons learned in research design, sampling, and data management.     

The Paleoenvironment and Lithic Taphonomy of Shi’Bat Dihya 1, a Middle Paleolithic Site in Wadi Surdud,Yemen

The Shi'bat Dihya 1 site in western Yemen, dated by optically stimulated luminescence to 55 ka, provides insight into the Middle Paleolithic peopling of the Arabian Peninsula. The archaeological layer is interstratified within thick, sandy silt floodplain deposits filling a piedmont basin. Luminescence dates, lack of soil development, and gypsum precipitation indicate a high accretion rate of the floodplain during Marine Isotope Stage 3, in connection with a (semi)‐arid environment. Rapid overbank sedimentation was likely a result of the remobilization of loess material deposited on the Yemeni Great Escarpment at the periphery of the adjacent Tihama coastal sand desert or of other sources. Fabric and size analyses of the lithic artifacts, together with spatial projections, indicate site modifications by floods. Primary modifications include (1) selective accumulation of medium‐sized lithic pieces as a result of hydraulic sorting, (2) bimodal orientation of artifacts, and (3) ripple‐like arrangement of lithics and bone/tooth fragments. The overrepresentation of teeth may also be a consequence of sorting. Although floods have distorted the original site patterning, long‐distance transport of artifacts by water can be excluded, as indicated by relatively high refitting rate, close proximity of artifacts derived from the same block of raw material, and lack of abrasion of the pieces. Therefore, the site is considered “geologically” in situ because its remobilization by water occurred shortly after human abandonment. This study also stresses that the effective preservation of a site cannot be assessed without careful taphonomic study, even in a potentially favorable depositional context such as silty alluvium.     

A robust feldspar luminescence dating method for Middle and Late Pleistocene sediments

Luminescence dating is used extensively to provide absolute chronologies for Late Pleistocene sediments. Nowadays, most optical dates are based on quartz optically stimulated luminescence (OSL). However, the application of this signal is usually limited to the last ～100 ka because of saturation of the quartz luminescence signal with dose. In contrast, the feldspar infrared stimulated luminescence (IRSL) dose–response curve grows to much higher doses; this has the potential to extend the datable age range by a factor of 4–5 compared with quartz OSL. However, it has been known for several decades that this IRSL signal is unstable, and this instability often gives rise to significant age underestimation. Here we test against independent age control the recently developed feldspar post‐IR IRSL approach to the dating of sediments, which appears to avoid signal instability. A physical model explaining our observations is discussed, and the method is shown to be accurate back to 600 ka. The post‐IR IRSL signal is reduced by exposure to daylight more slowly than that from quartz and low‐temperature IRSL, preventing its general application to young (e.g. Holocene) sediments. Nevertheless, this new approach is widely applicable (feldspar of appropriate luminescence behaviour is even more ubiquitous than quartz). These characteristics make this a method of great importance for the dating of Middle and Late Pleistocene deposits.     

Determination of total dissolved phosphorus in New Zealand fresh waters (note)

Ultraviolet digestion was found to be simpler and more convenient than perchloric acid digestion in the determination of total dissolved phosphorus in a variety of New Zealand freshwaters, but had limitations when used on waters with a high humic acid content.

Perchloric acid digestion was more powerful, breaking down polyphosphate bonds not affected by ultraviolet, but was subject to phosphorus losses from “bumping” during evaporation to dryness.     

Pre-eruptive melt composition and constraints on degassing of a water-rich pantellerite magma,Fantale volcano,Ethiopia

To determine the pre-eruptive composition of peralkaline magma at Frantale volcano, Ethiopia, we have studied glass inclusions in phenocrysts from a lateceupting, glassy pantelleritic lava flow. Matrix glass and crystal-free glass inclusions in quartz were analyzed for all major and most minor elements by electron microprobe and for H₂O and 15 lithophile trace elements by ion microprobe (SIMS). Compositions of inclusions may have been slightly modified by post-trapping quartz crystallization, the average concentrations of all constituents but silica may be artificially high by 10% relative. Glass inclusions contain extreme enrichments in H₂O (mean of 4.6 to 4.9 wt%) and several lithophile trace elements, which suggest that the lava erupted from a highly evolved, water-rich fraction of magma. The pre-eruptive concentration of water was much higher than that generally considered to occur in pantellerite magmas. Trends observed for lithophile elements in whole-rock samples from pre-,syn-and post-caldera eruptive units are mimicked in glass inclusions from the studied pantellerite lava; concentrations of Rb, Y, Zr, Nb, and Ce±Cl increase with progressive differentiation. With the exception of Cl and H₂O contents, the composition of matrix glass is similar to that of glass inclusions suggesting: that few constituents exsolved from magma or cooling glass; eruption and quench of the lava occurred rapidly; and the matrix glass is, largely, compositionally representative of melt. Higher average abundances of Cl and H₂O in glass inclusions suggest that these volatiles exsolved after melt entrapment; degassing could have occurred as either an equilibrium or disequilibrium process.     

Public perception of climate engineering and carbon capture and storage in Germany: survey evidence

Climate engineering (CE) and carbon capture and storage are controversial options for addressing climate change. This study compares public perception in Germany of three specific measures: solar radiation management (SRM) via stratospheric sulphate injection, large-scale afforestation, and carbon capture and storage sub-seabed (CCS-S). In a survey experiment we find that afforestation is most readily accepted as a measure for addressing climate change, followed by CCS-S and lastly SRM, which is widely rejected. Providing additional information decreases acceptance for all measures, but their ranking remains unchanged. The acceptance of all three measures is especially influenced by the perceived seriousness of climate change and by trust in institutions. Also, respondents dislike the measures more if they perceive them as a way of shirking responsibility for emissions or as an unconscionable manipulation of nature. Women react more negatively to information than men, whereas the level of education or the degree of intuitive vs reflective decision making does not influence the reaction to information.

POLICY RELEVANCE

Current projections suggest that the use of climate engineering (CE) technologies or carbon capture and storage (CCS) is necessary if global warming is to be kept well below 2°C. Our article focuses on the perspective of the general public and thus supplements the dialogue between policymakers, interest groups, and scientists on how to address climate change. We show that in Germany public acceptance of potentially effective measures such as SRM or CCS-S is low and decreases even more when additional information is provided. This implies that lack of public acceptance may turn out to be a bottleneck for future implementation. Ongoing research and development in connection with CCS-S and SRM requires continuous communication with, and involvement of, the public in order to obtain feedback and assess the public’s reservations about the measures. The low level of acceptance also implies that emission reduction should remain a priority in climate policy.     

Circumstellar aluminum oxide and silicon carbide in interplanetary dust particles

A systematic NanoSIMS isotope imaging study of sub-micrometer phases in interplanetary dust particles (IDPs) has led to the discovery of two presolar grain types that previously were observed only in primitive meteorites. A 350 × 600 nm² Al₂O₃ grain has a large ¹⁷O enrichment and a slight ¹⁸O depletion, as well as a ²⁶Mg excess due to the decay of extinct ²⁶Al. Because of its relatively large size and prominent location within the IDP, this presolar Al₂O₃ grain is well characterized by SEM-EDX analyses. A second, much smaller presolar grain has a diameter of 150 nm and a ¹³C enrichment of more than 300%. Isotopic anomalies in C are rarely found in IDPs and the magnitude of this anomaly is unprecedented. This grain also has a ¹⁵N-rich composition and its isotopic makeup as well as its secondary ion yields identify it as a SiC grain. The discovery of presolar Al₂O₃ and SiC in IDPs seamlessly complements earlier notions of interplanetary dust particles as the most primitive extraterrestrial material currently available for laboratory analysis. Both Al₂O₃ and SiC are common presolar grain types in primitive meteorites, but they appeared conspicuously absent from the presolar grain inventory in interplanetary dust particles, which is dominated by silicate stardust. Not finding these presolar grain types in interplanetary dust would have been difficult to explain. Abundance estimates of the new presolar grain types in IDPs are hampered by limited statistics, but both Al₂O₃ and SiC are less common than presolar silicates which have been found at relatively high abundances in IDPs. The particle in which these presolar grains have been found belongs to the ‘isotopically primitive subgroup’ of IDPs, yet does not contain any presolar silicates.     

Estimating water fluxes in the critical zone using water stable isotope approaches in the Groundnut and Ferlo basins of Senegal

Sustainable water management in semi-arid agriculture practices requires quantitative knowledge of water fluxes within the soil-vegetation-atmosphere system. Therefore, we used stable-isotope approaches to evaluate evaporation (E_a), transpiration (T_a), and groundwater recharge (R) at sites in Senegal's Groundnut basin and Ferlo Valley pasture region during the pre-monsoon, monsoon, and post-monsoon seasons of 2021. The approaches were based upon (i) the isothermal evaporation model (for quantifying E_a); (ii) water and isotope mass balances (to partition E_a and T_a for groundnut and pasture); and (iii) the piston displacement method (for estimating R). E_a losses derived from the isothermal evaporation model corresponded primarily to Stage II evaporation, and ranged from 0.02 to 0.09 mm d⁻¹ in the Groundnut basin, versus 0.02–0.11 mm d⁻¹ in Ferlo. At the groundnut site, E_a rates ranged from 0.01 to 0.69 mm d⁻¹; T_a was in the range 0.55–2.29 mm d⁻¹; and the T_a/ET_a ratio was 74%–90%. At the pasture site, the ranges were 0.02–0.39 mm d⁻¹ for E_a; 0.9–1.69 mm d⁻¹ for T_a; and 62–90% for T_a/ET_a. The ET_a value derived for the groundnut site via the isotope approach was similar to those from eddy covariance measurements, and also to the results from the previous validated HYDRUS-1D model. However, the HYDRUS-1D model gave a lower T_a/ET_a ratio (23.2%). The computed groundwater recharge for the groundnut site amounted to less than 2% of the local annual precipitation. Recommendations are made regarding protocols for preventing changes to isotopic compositions of water in samples that are collected in remote arid regions, but must be analysed days later. The article ends with suggestions for studies to follow up on evidence that local aquifers are being recharged via preferential pathways.