http://www.sciencedirect.com/science/article/pii/S1674987113000595

Magmatic oxide deposits in the～260 Ma Emeishan Large Igneous Province(ELIP),SW China and northern Vietnam,are important sources of Fe,Ti and V.Some giant magmatic Fe-Ti-V oxide deposits, such as the Panzhihua,Hongge,and Baima deposits,are well described in the literature and are hosted in layered mafic-ultramafic intrusions in the Panxi region,the central ELIP.The same type of ELIP- related deposits also occur far to the south and include the Anyi deposit,about 130 km south of Panzhihua,and the Mianhuadi deposit in the Red River fault zone.The Anyi deposit is relatively small but is similarly hosted in a layered mafic intrusion.The Mianhuadi deposit has a zircon U-Pb age of～260 Ma and is thus contemporaneous with the ELIP.This deposit was variably metamorphosed during the Indosinian orogeny and Red River faulting.Compositionally,magnetite of the Mianhuadi deposit contains smaller amounts of Ti and V than that of the other deposits,possibly attributable to the later metamorphism.The distribution of the oxide ore deposits is not related to the domal structure of the ELIP.One major feature of all the oxide deposits in the ELIP is the spatial association of oxide-bearing gabbroic intrusions,syenitic plutons and high-Ti flood basalts.Thus,we propose that magmas from a mantle plume were emplaced into a shallow magma chamber where they were evolved into a field of liquid immiscibility to form two silicate liquids,one with an extremely Fe-Ti-rich gabbroic composition and the other syenitic.An immiscible Fe-Ti-(P) oxide melt may then separate from the mafic magmas to form oxide deposits.The parental magmas from which these deposits formed were likely Fe-Ti-rich picritic in composition and were derived from enriched asthenospheric mantle at a greater depth than the magmas that produced sulfide-bearing intrusions of the ELIP.     

An answer to an important controversy and the need for caution when using simple models to predict inelastic earthquake response of buildings with torsion

This paper presents evidence that the extension of conclusions based on the widely used simplified, one story, eccentric systems of the shear‐beam type, to actual, nonsymmetric buildings and consequent assessments of the pertinent code provisions, can be quite erroneous, unless special care is taken to match the basic properties of the simplified models to those of the real buildings. The evidence comes from comparisons of results obtained using three variants of simplified models, with results from the inelastic dynamic response of three‐ and five‐story eccentric buildings computed with detailed MDOF systems, where the members are idealized with the well‐known plastic hinge model. In addition, a convincing answer is provided on a pertinent hanging controversy: For frame‐type buildings, designed in accordance with the dynamic provisions of modern codes (such as EC8 or IBC2000), which allow reduced shears at the stiff edge due to torsion, the frames at the flexible sides are the critical elements in terms of ductility demands. Copyright © 2009 John Wiley & Sons, Ltd.     

Recent past and future patterns of the Etesian winds based on regional scale climate model simulations

The aim of this work is to investigate the recent past and future patterns of the Etesian winds, one of the most persistent localized wind systems in the world, which dominates the wind regime during warm period over the Aegean Sea and eastern Mediterranean. An objective classification method, the Two Step Cluster Analysis (TSCA), is applied on daily data from regional climate model simulations carried out with RegCM3 for the recent past (1961–1990) and future periods (2021–2050 and 2071–2100) constrained at lateral boundaries either by ERA-40 reanalysis fields or the global circulation model (GCM) ECHAM5. Three distinct Etesian patterns are identified by TSCA with the location and strength of the anticyclonic action center dominating the differences among the patterns. In case of the first Etesian pattern there is a ridge located over western and central Europe while for the other two Etesian patterns the location of the ridge moves eastward indicating a strong anticyclonic center over the Balkans. The horizontal and vertical spatial structure of geopotential height and the vertical velocity indicates that in all three Etesian patterns the anticyclonic action center over central Europe or Balkan Peninsula cannot be considered as an extension of the Azores high. The future projections for the late 21st century under SRES A1B scenario indicate a strengthening of the Etesian winds associated with the strengthening of the anticyclonic action center, and the deepening of Asian thermal Low over eastern Mediterranean. Furthermore the future projections indicate a weakening of the subsidence over eastern Mediterranean which is rather controlled by the deepening of the south Asian thermal Low in line with the projected in future weakening of South Asian monsoon and Hadley cell circulations.     

Hydrochemistry and hydrogen sulfide generating processes in the Malm aquifer,Bavarian Molasse Basin,Germany

Knowledge about the hydrochemical conditions of deep groundwater is crucial for the design and operation of geothermal facilities. In this study, the hydrochemical heterogeneity of the groundwaters in the Malm aquifer, Germany, is assessed, and reasons for the extraordinarily high H₂S concentrations in the central part of the Bavarian Molasse Basin are proposed. Samples were taken at 16 sites, for a total of 37 individual wells, to analyze cations, anions, gas loading and composition. The hydrochemical characteristics of the Malm groundwater in the center of the Molasse Basin are rather heterogeneous. Although the groundwater in the central basin is dominated by meteoric waters, there is a significant infiltration of saline water from higher strata. Care has to be taken in the interpretation of data from geothermal sites, as effects of chemical stimulation of the boreholes may not be fully removed before the final analyses. The distribution of H₂S in the gas phase is correlated to the gas loading of the water which increases in the central basin. Temperatures, isotopic data and the sulfur mass balance indicate that H₂S in the central basin is related to thermochemical sulfate reduction (south of Munich) and bacterial sulfate reduction (north of Munich).     

Enhanced data and methods for improving open and free global population grids: putting ‘leaving no one behind’ into practice

ABSTRACT

Data on global population distribution are a strategic resource currently in high demand in an age of new Development Agendas that call for universal inclusiveness of people. However, quality, detail, and age of census data varies significantly by country and suffers from shortcomings that propagate to derived population grids and their applications. In this work, the improved capabilities of recent remote sensing-derived global settlement data to detect and mitigate major discrepancies with census data is explored. Open layers mapping built-up presence were used to revise census units deemed as ‘unpopulated’ and to harmonize population distribution along coastlines. Automated procedures to detect and mitigate these anomalies, while minimizing changes to census geometry, preserving the regional distribution of population, and the overall counts were developed, tested, and applied. The two procedures employed for the detection of deficiencies in global census data obtained high rates of true positives, after verification and validation. Results also show that the targeted anomalies were significantly mitigated and are encouraging for further uses of free and open geospatial data derived from remote sensing in complementing and improving conventional sources of fundamental population statistics.     

Another Typical Day in this Typical Town: place as inspiration for music creation and creative expression

Geographically isolated within its own State as well as from the rest of the country, and with the highest percentage of metropolitan primacy of all Australian States, Perth is a city somewhat uncomfortable with its creative and cultural identity. The city is physically peripheral to networks in the arts and creative industries that operate at the national level. And, symbolically, many in Perth’s cultural sector feel a sense of isolation. Yet, in certain cultural sectors, such as music, Perth demonstrably punches above its weight, consistently generating high-quality cultural exports. This paper unpicks this curious juxtaposition. It examines the influence of Perth—as a geographical location and a site of creative inspiration—on the music created and disseminated by local contemporary musicians who write and perform their own indie pop/rock music. I discuss the nuanced relationship between creative clustering and place, drawing on theories regarding the relationship between music and place, the notion of the music scenes and creativity and creative practices. I explore how living in Perth, a geographically isolated city, with a highly concentrated population and associated music sector, influences creative expressions, desires and inspirations, for a select group of local indie pop/rock musicians who achieved national and international notoriety with their music in the late 1990s and 2000s. Navigating isolation but nevertheless energised by strong social connections and scene participation, Perth musicians catalysed creativity in ways that contribute to evolving debates on the links between place, creativity and music.     

Between-Population Differences in Multi-stressor Tolerance During Embryo Development in the American Horseshoe Crab, <Emphasis Type="Italic">Limulus polyphemus</Emphasis>

The American horseshoe crab, Limulus polyphemus, is found along the Atlantic and Gulf of Mexico coasts in genetically isolated populations. Eggs are laid in shoreline beaches that expose developing embryos to combinations of environmental stressors. Whether populations of L. polyphemus differ in multi-stressor tolerance had never been tested. We assessed the multi-stressor tolerance of L. polyphemus embryos from a population in Delaware Bay (DE) and determined whether these differed from the multi-stressor tolerance of embryos from a more southerly Florida Gulf Coast (FGC) population. We monitored the field sediment temperatures and determined multi-stressor tolerance of DE embryos, then compared these to published data for FGC embryos. For multi-stressor tolerance, we assessed development success of embryos in 2-week exposures to 36 full-factorial combinations of temperature (20, 25, 30, 35 °C), salinity (5, 15, and 34 ppt), and ambient O₂ (5, 13, and 21% O₂), followed by 2 weeks in recovery conditions. Sediment temperatures in the DE site ranged from 9.5 to 46 °C, with extended periods exceeding 35 °C. Development success was similar between the DE and FGC populations in 14 of 26 multi-stressor combinations. The DE embryos were generally more successful in conditions that included high temperature or moderate hyposalinity, whereas the FGC embryos were generally more successful in conditions that included extreme hyposalinity. This suggests that although multi-stressor tolerances are generally similar between the two populations, specific differences exist that correlate more with differences in nest microenvironment than latitude.     

Microtopography,water storage and flow patterns in a fine‐textured soil under agricultural use

Agricultural use of soils implies tillage and often compaction and therefore influences processes on soil surface and affects infiltration of water into the subsoil. Although many studies on soil surface processes or flow patterns in soils exist, works relating both are rare in literature. We did two tracer experiments with Brilliant Blue FCF on a tilled and compacted plot and a non‐tilled one to investigate water storage on the soil surface during simulated rainfall and changes of soil microtopography, to analyse the associated flow patterns in the soil and to relate both to tillage and compaction. Our results show that storage was larger on the tilled and compacted plot than on the non‐tilled one. After tillage, transport processes above the plough pan were partly disconnected from those underneath because macropores were disrupted and buried by the tillage operation. However, preferential flow along cracks occurred on both plots and the macropores buried below the tillage pan still functioned as preferential flow paths. Therefore, we conclude that the studied soil is susceptible to deep vertical solute propagation at dry conditions when cracks are open, irrespective of tillage and compaction. Copyright © 2012 John Wiley & Sons, Ltd.     

Till‐forming processes beneath parts of the Cordilleran Ice Sheet,British Columbia,Canada: macroscale and microscale evidence and a new statistical technique for analysing microstructure data

This paper presents the first integrated macroscale and microscale examination of subglacial till associated with the last‐glacial (Fraser Glaciation) Cordilleran Ice Sheet (CIS). A new statistical approach to quantifying till micromorphology (multivariate hierarchical cluster analysis for compositional data) is also described and implemented. Till macrostructures, macrofabrics and microstructures support previous assertions that primary till in this region formed through a combination of lodgement and deformation processes in a temperate subglacial environment. Macroscale observations suggest that subglacial environments below the CIS were probably influenced by topography, whereby poor drainage of the substrate in topographically constricted areas, or on slopes adverse to the ice‐flow direction at glacial maximum, facilitated ductile deformation of the glacier bed. Microscale observations suggest that subglacial till below the CIS experienced both ductile and brittle deformation, including grain rotation and squeeze flow of sediment between grains under moist conditions, and microshearing, grain stacking and grain fracturing under well‐drained conditions. Macroscale observations suggest that ductile deformation events were probably followed by brittle deformation events as the substrate subsequently drained. The prevalence of ductile‐type microstructures in most till exposures investigated in this study suggests that ductile deformation signatures can be preserved at the microscale after brittle deformation events that result in larger‐scale fractures and shear structures. It is likely that microscale ductile deformation can also occur within distributed shear zones during lodgement processes. Cluster analysis of microstructure data and qualitative observations made from thin sections suggest that the relative frequency of countable microstructures in this till is influenced by topography in relation to ice‐flow direction (bed drainage conditions) as well as by the frequency and distribution of voids in the till matrix and skeletal grain shapes.