Morphometric and geological conditions for sediment accumulation in the Udava River,Outer Carpathians,Slovakia

The accumulation of sediment in river channels is a phenomenon that is not only influenced by the channel morphology, but also by the physical and geographical characteristics and the endogenous and exogenous processes taking place in the catchment. This paper presents an analysis of the impact the changes in lithological conditions have on the morphological and morphometric parameters of the Udava River channel and their relation to the channel accumulation forms representative of the river’s longitudinal profile as well as of its planform. Results document when accumulation forms occur and what is their spatial distribution within the longitudinal and cross-sectional river profiles. More resistant structures created sections with a lower degree of sedimentation, while in depression segments the degree of sedimentation was higher. With the increase in longitudinal slope, the impact of channel width on the average channel bar size increased. Also a difference in the accumulation was observed between the left and right bank which could be possibly explained by the impact of Coriolis force.     

Paleoenvironmental and Human Behavioral Implications of the Boegoeberg 1 Late Pleistocene Hyena Den, Northern Cape Province, South Africa

Boegoeberg 1 (BOG1) is located on the Atlantic coast of South Africa, 850 km north of Cape Town. The site is a shallow rock shelter in the side of a sand-choked gully that was emptied by diamond miners. Abundant coprolites, chewed bones, and partially digested bones implicate hyenas as the bone accumulators. The location of the site, quantity of bones, and composition of the fauna imply it was a brown hyena nursery den. The abundance of Cape fur seal bones shows that the hyenas had ready access to the coast. Radiocarbon dates place the site before 37,000 ¹⁴C yr ago, while the large average size of the black-backed jackals and the presence of extralimital ungulates imply cool, moist conditions, probably during the early part of the last glaciation (isotope stage 4 or stage 3 before 37,000 ¹⁴C yr ago) or perhaps during one of the cooler phases (isotope substages 5d or 5b) within the last interglaciation. Comparisons of the BOG1 seal bones to those from regional Middle Stone Age (MSA) and Later Stone Age (LSA) archeological sites suggest (1) that hyena and human seal accumulations can be distinguished by a tendency for vertebrae to be much more common in a hyena accumulation and (2) that hyena and LSA accumulations can be distinguished by a tendency for hyena-accumulated seals to represent a much wider range of individual seal ages. Differences in the way hyenas and people dismember, transport, and consume seal carcasses probably explain the contrast in skeletal part representation, while differences in season of occupation explain the contrast in seal age representation. Like modern brown hyenas, the BOG1 hyenas probably occupied the coast year-round, while the LSA people focused their coastal visits on the August–October interval when nine-to-eleven-month-old seals were abundant. The MSA sample from Klasies River Mouth Cave 1 resembles BOG1 in seal age composition, suggesting that unlike LSA people, MSA people obtained seals more or less throughout the year.     

Between-Population Differences in Multi-stressor Tolerance During Embryo Development in the American Horseshoe Crab, <Emphasis Type="Italic">Limulus polyphemus</Emphasis>

The American horseshoe crab, Limulus polyphemus, is found along the Atlantic and Gulf of Mexico coasts in genetically isolated populations. Eggs are laid in shoreline beaches that expose developing embryos to combinations of environmental stressors. Whether populations of L. polyphemus differ in multi-stressor tolerance had never been tested. We assessed the multi-stressor tolerance of L. polyphemus embryos from a population in Delaware Bay (DE) and determined whether these differed from the multi-stressor tolerance of embryos from a more southerly Florida Gulf Coast (FGC) population. We monitored the field sediment temperatures and determined multi-stressor tolerance of DE embryos, then compared these to published data for FGC embryos. For multi-stressor tolerance, we assessed development success of embryos in 2-week exposures to 36 full-factorial combinations of temperature (20, 25, 30, 35 °C), salinity (5, 15, and 34 ppt), and ambient O₂ (5, 13, and 21% O₂), followed by 2 weeks in recovery conditions. Sediment temperatures in the DE site ranged from 9.5 to 46 °C, with extended periods exceeding 35 °C. Development success was similar between the DE and FGC populations in 14 of 26 multi-stressor combinations. The DE embryos were generally more successful in conditions that included high temperature or moderate hyposalinity, whereas the FGC embryos were generally more successful in conditions that included extreme hyposalinity. This suggests that although multi-stressor tolerances are generally similar between the two populations, specific differences exist that correlate more with differences in nest microenvironment than latitude.     

Geospatial Investigation into Groundwater Pollution and Water Quality Supported by Satellite Data: A Case Study from the Evros River (Eastern Mediterranean)

Managing water resources, in terms of both quality and quantity, in transboundary rivers is a difficult and challenging task that requires efficient cross-border cooperation and transparency. Groundwater pollution risk assessment and mapping techniques over the full catchment area are important tools that could be used as part of these water resource management efforts, to estimate pollution pressures and optimize land planning processes. The Evros river catchment is the second largest river in Eastern Europe and sustains a population of 3.6 million people in three different countries (Bulgaria, Turkey and Greece). This study provides detailed information on the main pollution sources and pressures in the Evros catchment and, for the first time, applies, assesses and evaluates a groundwater pollution risk mapping technique using satellite observations (Landsat NDVI) and an extensive dataset of field measurements covering different seasons and multiple years. We found that approximately 40 % of the Greek part of the Evros catchment is characterized as of high and very high pollution risk, while 14 % of the study area is classified as of moderate risk. Both the modeled and measured water quality status of the river showed large spatiotemporal variations consistent with the strong anthropogenic pressures in this system, especially on the northern and central segments of the catchment. The pollutants identified illustrate inputs of agrochemicals and urban wastes in the river. High correlation coefficients (R between 0.79 and 0.85) were found between estimated pollution risks and measured concentrations of those chemical parameters that are mainly attributed to anthropogenic activities rather than in situ biogeochemical processes. The pollution risk method described here could be used elsewhere as a decision support tool for mitigating the impact of hazardous human activities and improving management of groundwater resources.     

Effect of selection and sequencing of representative wave conditions on process-based predictions of equilibrium embayed beach morphology

In order to decrease the simulation time of morphodynamic models, often-complex wave climates are reduced to a few representative wave conditions (RWC). When applied to embayed beaches, a test of whether a reduced wave climate is representative or not is to see whether it can recreate the observed equilibrium (long-term averaged) bathymetry of the bay. In this study, the wave climate experienced at Milagro Beach, Tarragona, Spain was discretized into ‘average’ and ‘extreme’ RWCs. Process-based morphodynamic simulations were sequenced and merged based on ‘persistent’ and ‘transient’ forcing conditions, the results of which were used to estimate the equilibrium bathymetry of the bay. Results show that the effect of extreme wave events appeared to have less influence on the equilibrium of the bay compared to average conditions of longer overall duration. Additionally, the persistent seasonal variation of the wave climate produces pronounced beach rotation and tends to accumulate sediment at the extremities of the beach, rather than in the central sections. It is, therefore, important to account for directional variability and persistence in the selection and sequencing of representative wave conditions as is it essential for accurately balancing the effects beach rotation events.     

Mars reconnaissance lander: Vehicle and mission design

There is enormous potential for more mobile planetary surface science. This is especially true in the case of Mars because the ability to cross challenge terrain, access areas of higher elevation, visit diverse geological features and perform long traverses of up to 200 km supports the search for past water and life. Vehicles capable of a ballistic ‘hop’ have been proposed on several occasions, but those proposals using in-situ acquired propellants are the most promising for significant planetary exploration. This paper considers a mission concept termed Mars Reconnaissance Lander using such a vehicle. We describe an approach where planetary science requirements that cannot be met by a conventional rover are used to derive vehicle and mission requirements.The performance of the hopper vehicle was assessed by adding estimates of gravity losses and mission mass constraints to recently developed methods. A baseline vehicle with a scientific payload of 16.5 kg and conservatively estimated sub-system masses is predicted to achieve a flight range of 0.97 km. Using a simple consideration of system reliability, the required cumulative range of 200 km could be achieved with a probability of around 80%. Such a range is sufficient to explore geologically diverse terrains. We therefore plot an illustrative traverse in Hypanis Valles/Xanthe Terra, which encounters crater wall sections, periglacial terrain, aqueous sedimentary deposits and a traverse up an ancient fluvial channel. Such a diversity of sites could not be considered with a conventional rover. The Mars Reconnaissance Lander mission and vehicle presents some very significant engineering challenges, but would represent a valuable complement to rovers, static landers and orbital observations.     

Regional ash fall hazard II: Asia-Pacific modelling results and implications

In a companion paper (this volume), the authors propose a methodology for assessing ash fall hazard on a regional scale. In this study, the methodology is applied to the Asia-Pacific region, determining the hazard from 190 volcanoes to over one million square kilometre of urban area. Ash fall hazard is quantified for each square kilometre grid cell of urban area in terms of the annual exceedance probability (AEP), and its inverse, the average recurrence interval (ARI), for ash falls exceeding 1, 10 and 100?mm. A surrogate risk variable, the Population-Weighted Hazard Score: the product of AEP and population density, approximates the relative risk for each grid cell. Within the Asia-Pacific region, urban areas in Indonesia are found to have the highest levels of hazard and risk, while Australia has the lowest. A clear demarcation emerges between the hazard in countries close to and farther from major subduction plate boundaries, with the latter having ARIs at least 2 orders of magnitude longer for the same thickness thresholds. Countries with no volcanoes, such as North Korea and Malaysia, also face ash falls from volcanoes in neighbouring countries. Ash falls exceeding 1?mm are expected to affect more than one million people living in urban areas within the study region; in Indonesia, Japan and the Philippines, this situation could occur with ARIs less than 40?years.     

Deposition and tectonic setting of the Palaeoproterozoic Castelo dos Sonhos metasedimentary formation,Tapajós Gold Province,Amazonian Craton,Brazil: age and isotopic constraints

The Castelo dos Sonhos Formation (CSF) represents a relic of a sedimentary basin located in the southeastern Tapajós Gold Province (TGP), at its boundary with the Iriri–Xingu Domain (IX), south of the Amazonian Craton. The formation comprises mature, coarse-grained metasandstones (quartz-arenites) intercalated with auriferous metaconglomerates with clasts of quartz and subordinately of banded iron formation, quartzite, schist, and felsic metavolcanic rocks. Lithology, planar, channelled, and large-scale cross-bedding suggest deposition in continental setting by the braided fluvial system associated with alluvial fans and subordinate aeolian dunes. The rocks underwent very low metamorphism and gently synformal folding, and were intruded by andesites and granitoids (2011–1918 Ma). U–Pb LA-ICP-MS zircon data indicate maximum depositional ages of 2050 Ma (metaconglomerate) and 2074, 2088, and 2104 Ma (metasandstones). Hence, deposition occurred at 2050–2011 Ma, slightly preceding or being coeval with the onset of the orogenic phase in TGP (2030–1956 Ma). The quartz-arenite composition, zircon U–Pb data, and negative εHf (?1.3 to ?13.0) and εNd (?2.9 to ?5.3) values indicate: (1) quartzose provenance, (2) prolonged transport and recycling of sedimentary sources, (3) multiple age peaks (2050–3700 Ma), with predominant sources of 2100 and 2750 Ma, and (4) long crustal residence time for the source rocks. Source areas were Rhyacian–Siderian orogenic belts to Mesoarchaean terranes of the Amazonian Craton located to the east, southeast, and northeast of TGP, along with Palaeoarchaean and Eoarchaean detrital zircons recycled from older sedimentary rocks. We interpret CSF as part of a larger foreland system related to the evolution of Rhyacian orogens, currently represented by the Bacajá and Santana do Araguaia domains. The present location of CSF in the easternmost TGP, close to its boundary with IX, is due to rifting (1.89–1.80 Ga) that produced the Uatumã Silicic Large Igneous Province (Uatumã SLIP), and the juxtaposition of the crustal domains is supported by gravity data.     

Ergodicity and Earthquake Catalogs: Forecast Testing and Resulting Implications

Recently the equilibrium property of ergodicity was identified in an earthquake fault system (Tiampo et al., Phys. Rev. Lett. 91, 238501, 2003; Phys. Rev. E 75, 066107, 2007). Ergodicity in this context not only requires that the system is stationary for these networks at the applicable spatial and temporal scales, but also implies that they are in a state of metastable equilibrium, one in which the ensemble averages can be substituted for temporal averages when studying their behavior in space and time. In this work we show that this property can be used to identify those regions of parameter space which are stationary when applied to the seismicity of two naturally-occurring earthquake fault networks. We apply this measure to one particular seismicity-based forecasting tool, the Pattern Informatics index (Tiampo et al., Europhys. Lett. 60, 481–487, 2002; Rundle et al., Proc. National Acad. Sci., U.S.A., Suppl. 1, 99, 2463, 2002), in order to test the hypothesis that the identification of ergodic regions can be used to improve and optimize forecasts that rely on historic seismicity catalogs. We also apply the same measure to synthetic catalogs in order to better understand the physical process that affects this accuracy. We show that, in particular, ergodic regions defined by magnitude and time period provide more reliable forecasts of future events in both natural and synthetic catalogs, and that these improvements can be directly related to specific features or properties of the catalogs that impact the behavior of their spatial and temporal statistics.