GIS在定向运动中的应用

介绍了GIS在定向地图制作方面的应用、在定向运动的场地选择中的应用以及在定向运动的比赛路线设计中的应用。结合实例,分析了目前定向地图制作方面存在的问题,提出了基于GIS的定向地图辅助设计系统的开发框架和开发方案。     

基于熵权法的我国西部地区历史地震灾害等级划分

选取1990—2019年我国西部地区258次破坏性地震事件的灾害损失资料进行空间化处理,以每次地震烈度区的面积、死亡人数、受伤人数、直接经济损失等4个灾害损失量为指标,运用熵权法确定各指标的权重系数,划分我国西部地区各市(州)的5个历史地震灾害等级.结果表明,历史地震灾害极重的区域是四川省阿坝藏族羌族自治州、青海省玉树...     

Development of the Automatic Seeing Monitor for the Site Testing of Dome A

The Antarctic site-testing campaigns have shown that Dome C is an excellent astronomical site on the earth, it is better than any of existing mid-latitude astronomical sites in the world, because of its cold and dry weather, low infrared background radiation, continuously observable time as long as 3–4 months, clear and highly transparent atmosphere, low wind speed, and the absence of dust and light pollution. And in the international astronomical community it is generally believed that Dome A with a higher altitude may be better than Dome C as a potential excellent astronomical site. In the past 3 years, although held by the Center for Antarctic Astronomy of Chinese Academy of Sciences, the site testing at Dome A has preliminarily con?rmed the many advantages of Dome A as an excellent astronomical site, but the data about the atmospheric seeing, which is an important parameter for assessing the site quality for optical observations, have not been obtained until now. Hence, on the basis of a commercial telescope with the diameter of 35 cm, we have made the hardware reformation and software development to have it operate as a DIMM (Differential Image Motion Monitor), which can simultaneously monitor both the seeing and isoplanatic angle at Dome A automatically. At present this instrument has been shipped to Antarctica by the “Xuelong” exploration ship, and will be installed at Dome A, and begin to work in early 2011. Before the shipment, by through the comparative measurements together with an existing seeing monitor at the Xinglong astronomical station, the software, hardware, as well as the installation and adjustment of the instrument, are further veri?ed by testing.     

电子地图业在卫星导航应用中的发展对策研究

本文分析了卫星导航应用中与地理信息产业相关的电子地图产业在国内外发展的现状与趋势,研究了新时期中国导航电子地图业的基本特征和作用,提出了电子地图产业的发展对策。     

盐分对黏性土的沉积特性与表面电位影响研究

为了明晰黏土矿物和盐分浓度在沉积过程中所起的作用及物理机制,选取高岭土、膨润土及两者组成的混合土进行粒径分析试验、沉积试验和Zeta电位测试。结果显示,盐分环境下高岭土和膨润土的平均粒径增大,部分黏粒组向粉粒组转化。高岭土在蒸馏水环境下和盐水环境下,最终都形成土-水的稳定分界面,但是絮凝稳定时间在盐分环境下更短。膨润土在蒸馏水环境下处于稳定的分散体系中,在盐水环境下迅速絮凝沉积。混合土在蒸馏水环境下,上部澄清层和下部沉淀层之间存在土颗粒的悬浮层,且该层的高度最终稳定;盐水环境下,混合土则迅速的发生土水分离。随着NaCl浓度增加,膨润土和高岭土的Zeta电位绝对值降低,因此胶粒组的絮凝行为对平均粒径产生影响,进而影响其沉积特性。     

某废弃煤矿有机污染场地地下水修复治理中试研究

某废弃煤矿竖井经倾倒有机废液,导致环境污染事件,造成巷道及采空区内地下水污染。本文结合场地实际情况,选取倾倒竖井(事故井)及周边区域为中试区域,采用“抽出处理+原位氧化循环”两阶段联合修复技术对污染场地开展中试研究。本文介绍了场地污染概况、地下水修复中试方案设计和实施,以及对修复效果进行评价。结果表明,中试处理后地下水中COD和二氯甲烷最高去除率分别为97.88%和99.74%。中试试验表明, “抽出处理+原位氧化循环”两阶段修复技术,对处理矿区内巷道及采空区等复杂地层结构下深层地下水中有机污染物具有较好的去除效果,可以结合现场实际情形对整个污染场区进行规模应用。     

LOQUAT: an open-source GPU-accelerated SPH solver for geotechnical modeling

Acta Geotechnica - Smoothed particle hydrodynamics (SPH) is a meshless method gaining popularity recently in geotechnical modeling. It is suitable to solve problems involving large deformation,...     

Numerical evaluation of soft inter‐slab joint in concrete‐faced rockfill dam with dual mortar finite element method

Recently constructed concrete‐faced rockfill dams (CFRDs) often use soft inter‐slab joints to prevent axial compression‐induced extrusion damage in the concrete face. Due to the complexity of the multibody contact and the lack of information on the actual behavior of soft joints, it is highly challenging to numerically assess the effect of soft joints in CFRDs. In this paper, we present a numerical approach for the three‐dimensional modeling of CFRDs with hard and soft joints. A dual mortar finite element method with Lagrange multiplier is developed to treat the multibody contact in hard joints with impenetrability condition. The soft joint slab‐filler‐slab contact system is modeled using an equivalent contact interface approach, where the soft contact constraints are imposed using a perturbed Lagrange formulation. Through a series of laboratory tests, the mechanical behavior of soft joint is investigated. An extrusion model for the soft joint is presented and implemented in the dual mortar finite element method. The proposed numerical method is applied to the three‐dimensional analysis of Tianshengqiao‐1 CFRD. Despite the complex multibody contact and strong material and geometry nonlinearities in the CFRD, the proposed method is stable and capable of capturing salient characteristics of the CFRD. Numerical results show that in Tianshengqiao‐1, the employment of soft joints can effectively reduce the axial compression stress, thus greatly alleviating the risk of extrusion damage in the concrete face.