磁浮交通试验线压力管道直线度的测量方法研究及应用

目前,国内外对于磁浮交通真空压力管道直线度测量问题的研究较少。本文结合西南交通大学在建的真空磁浮高速列车试验装置,提出了一种真空压力管道直线度测量方法。该方法在管道内建立高精度=维控制网,依据三维控制网测量采用圆曲线拟合方法确定各节管道的圆心坐标,并采用直线拟合方法分析整个管道的直线度。最后依据上述方法编制程序对实测数据进行了处理分析,验证了方法的可行性和正确性,可为今后真空磁浮压力管道的建设提供技术参考。     

大跨径斜拉桥主梁线形测控新方法研究及应用

大跨径斜拉桥结构刚度小、变形大,为保证主梁顺利合龙,施工过程必须快速精确定位主梁上各个节段的平面和竖向线形。区别于传统的极坐标主梁平面线形测控方法,本文提出采用全站仪自由设站法测控主梁平面线形;同时区别于传统的水准测量方法,提出采用全站仪间接高差传递的方法测控主梁竖向线形。介绍了两种新方法的测量原理,通过工程实例论证了新方法的可行性和实用性,且能够大幅度提高测控效率,可为其他大跨径桥梁主梁线形的测控提供一定的参考。     

大气折光系数测定及在悬索桥基准索股线形测量中的应用

大跨度悬索桥基准索股跨中位置处于百米高空,如何测得精确的垂度值,对主缆线形进行控制至关重要。本文分析了影响悬索桥基准索股垂度测量精度的主要因素,提出了基于实时大气折光系数改正的单向三角高程的跨中垂度测量新方法。在桥址区建立高精度的高差基准,通过对桥址区的大气折光系数的测定及改正试验,证明该测量方法切实可行。基准索股跨中垂度采用双测站进行测量,当双测站所测同一点绝对垂度互差小于10 mm时,取双测站所测垂度均值作为该点的垂度值。该方法的测量结果达到设计精度要求,对同类工程测量项目有借鉴意义。     

Turning depths of internal tides in the South China Sea inferred from profile data

Theoretically, propagating internal tides in the ocean may reflect at turning depths, where buoyancy frequencies equal tidal frequencies, before colliding with the air-sea interface or rugged bottom topography. Globally, the internal tide lower turning depths（ITLTDs） in the open ocean have been mapped; however, knowledge of the presence of ITLTDs in the South China Sea（SCS） is lacking. In this study, 2 125 high-quality temperature-salinity profiles（including 58 deep-sea hydrographic measurements...     

双船双方位角地震探测技术方法及应用效果

南海东沙海域的陆坡台地区, 浅表断裂及生物礁发育众多, 浅层新生界多为碳酸盐岩层, 中深层的中生界内部构造复杂, 断裂较多, 常规单船窄方位地震剖面显示中深层反射品质较差。利用双船可以设计灵活的观测系统, 形成双方位角地震探测方式, 对于地下同一反射点的照明, 可以获得比窄方位角探测更好的效果, 也可以改善高速屏蔽层下方、高陡倾角斜层等区域的成像质量。文章通过重点技术的攻关研发, 进行了单源激发、双缆接收的双方位角采集试验, 成功实现该方法在南海海域中深层地震勘探中的应用。     

On the Collision Nature of Two Coronal Mass Ejections: A Review

Observational and numerical studies have shown that the kinematic characteristics of two or more coronal mass ejections (CMEs) may change significantly after a CME collision. The collision of CMEs can have a different nature, i.e. inelastic, elastic, and superelastic processes, depending on their initial kinematic characteristics. In this article, we first review the existing definitions of collision types including Newton’s classical definition, the energy definition, Poisson’s definition, and Stronge’s definition, of which the first two were used in the studies of CME–CME collisions. Then, we review the recent research progresses on the nature of CME–CME collisions with the focus on which CME kinematic properties affect the collision nature. It is shown that observational analysis and numerical simulations can both yield an inelastic, perfectly inelastic, merging-like collision, or a high possibility of a superelastic collision. Meanwhile, previous studies based on a 3D collision picture suggested that a low approaching speed of two CMEs is favorable for a superelastic nature. Since CMEs are an expanding magnetized plasma structure, the CME collision process is quite complex, and we discuss this complexity. Moreover, the models used in both observational and numerical studies contain many limitations. All of the previous studies on collisions have not shown the separation of two colliding CMEs after a collision. Therefore the collision between CMEs cannot be considered as an ideal process in the context of a classical Newtonian definition. In addition, many factors are not considered in either observational analysis or numerical studies, e.g. CME-driven shocks and magnetic reconnections. Owing to the complexity of the CME collision process, a more detailed and in-depth observational analysis and simulation work are needed to fully understand the CME collision process.     

读《地震地下流体学》的初浅体会

中国地震局地质研究所资深专家、中国地震局地下流体学科组顾问车用太研究员与鱼金子、王基华、刘五洲、孙君秀、林元武等合作编著的《地震地下流体学》,在地震科     

辽西中生代花岗岩中锆石的地球化学演化特征及其地质意义

文中论述了辽西中生代花岗岩中锆石富∑REE、Mo,低Zr/Hf的成分特点。随岩浆演化,岩体由早侵入期次到晚侵入期次,锆石的Hf、∑REE、Th、U含量递增,Zr/Hf递减的演化规律明显。晚世代锆石较早世代更富含成矿元素(Mo)、稀土、放射性元素。指出锆石中成矿元素Mo的浓集,并伴随着Hf、∑REE、Th、U元素含量的相对增高,可作为岩体潜在成矿(Mo)的一种重要标志。锆石的矿物地球化学特征为区内花岗岩成因类型的划分提供了依据。