中国区域植树造林对地表温度的影响

近些年随着中国植树造林计划的持续进行,植被覆盖不断增长,进而影响中国地表环境。地表温度是表征地表物理过程的重要参数,是地表—大气能量交换中的驱动因子,广泛应用于气候、水文、生态及气象等研究中,是众多基础学科研究的关键参数之一。为了分析植树造林战略对局地和区域尺度的影响,以指导相应政策的制定,本文采用IBM（Intrinsic Biophysical Mechanism）方法研究了中国区域植树造林对地表温度的影响,并讨论了辐射效应与非辐射效应以及不同林地类型对地表温度的影响。结果表明：（1）植树造林对地表温度的影响在高纬度地区的寒冷季节表现为增温作用,而在温暖季节各纬度均表现为降温作用。（2）寒冷季节高纬度地区植树造林对地表温度的辐射效应较为强烈,而在其他季节各纬度植树造林对地表温度的非辐射效应占主导作用,辐射效应较为微弱。（3）开阔地转为林地时,不同林地类型对地表温度有不同的影响特征。开阔地转为落叶阔叶林时对地表温度的影响与植树造林对地表温度的总体影响变化具有相似特征,表现为在寒冷季节高纬度地区为增温作用,在低纬度地区均表现为降温作用,开阔地转为常绿针叶林、常绿阔叶林时对地表温度的影响均表现为降温作用。     

图象分割中随机噪音的影响

该文在生成的灰度图象上加上随机噪音，用最大后验（ＭＡＰ）估计方法、模糊Ｃ－均值方法和Ｏｔｓｕ阈值方法进行了分割计算，对结果进行了对比分析，绘出了分割随噪音的标准差变化曲线，对噪音图象使用了不同的滤波方法处理之后，并进行计算。     

The Ashima/MIT Mars GCM and argon in the martian atmosphere

We investigate the ability of modern general circulation models (GCMs) to simulate transport in the martian atmosphere using measurements of argon as a proxy for the transport processes. Argon provides the simplest measure of transport as it is a noble gas with no sinks or sources on seasonal timescales. Variations in argon result solely from ‘freeze distillation’, as the atmosphere condenses at the winter poles, and from atmospheric transport. Comparison of all previously published models when rescaled to a common definition of the argon enhancement factor (EF) suggest that models generally do a poor job in predicting the peak enhancement in southern winter over the winter pole – the time when the capability of the model transport approaches are most severely tested. Despite observed peak EF values of ～6, previously published model predictions peaked at EF values of only 2–3. We introduce a new GCM that provides a better treatment of mass conservation within the dynamical core, includes more sophisticated tracer transport approaches, and utilizes a cube–sphere grid structure thus avoiding the grid-point convergence problem at the pole that exists for most current Mars GCMs. We describe this model – the Ashima Research/Massachusetts Institute of Technology Mars General Circulation Model (Ashima/MIT Mars GCM) and use it to demonstrate the significant sensitivity of peak EF to the choices of transport approach for both tracers and heat. We obtain a peak EF of 4.75 which, while over 50% higher than any prior model, remains well short of the observed value. We show that the polar EF value in winter is primarily determined by the competition between two processes: (1) mean meridional import of lower-latitude air not enriched in argon and (2) the leakage of enriched argon out of the polar column by eddies in the lowest atmospheric levels. We suggest possibilities for improving GCM representation of the CO₂ cycle and the general circulation that may further improve the simulation of the argon cycle. We conclude that current GCMs may be insufficient for detailed simulation of transport-sensitive problems like the water cycle and potentially also the dust cycle.     

A modified Raupach's model applicable for shear-stress partitioning on surfaces covered with dense and flat-shaped gravel roughness elements

A commonly used measure to prevent soil wind erosion is to cover the surface with gravel. Gravel can inhibit soil erosion by covering the surface directly, changing the airflow field near the surface and sharing the shear stress of wind. Similar to other roughness elements, the protective effect of gravel on soil is usually expressed in terms of the ratio of the shear stress on the exposed soil surface to the total shear stress on the rough surface due to wind, i.e. through a shear-stress partitioning model. However, the existing shear-stress partitioning models, represented by Raupach's model (RM93), are only applicable when the lateral coverage of the roughness elements, λ < 0.10, and the applicability of the models to flat-shaped roughness elements is unclear. The purpose of this study is to verify the applicability of RM93 for dense and flat-shaped gravel roughness elements by using shear-stress data from wind-tunnel measurements pertaining to roughness elements with different densities (0.013 ≤ λ ≤ 0.318) and flat shapes (height-to-width ratios in the range 0.20 ≤ H/W ≤ 0.63), and to modify RM93 to enhance its predictive ability. The results indicate that RM93 cannot accurately predict the shear-stress partitioning for surfaces covered by densely distributed and flat-shaped gravel roughness elements. This phenomenon occurs because, when roughness elements are distributed densely or are flat-shaped, the proportion of the shear stress on the top surface of the roughness elements (τ_c) to the total shear stress (τ) is large; in this case, τ_c plays a dominant role and serves as an essential component in the shear-stress partitioning model. Consequently, RM93 is modified by incorporating τ_c into the calculation of τ. Under conditions of λ < 0.32 and H/W > 0.2, the modified RM93 can yield satisfactory predictions regarding the shear-stress partitioning.     

A new portable in situ flume for measuring critical shear stress on river beds

A new portable in situ flume(PISF)for measuring critical bed shear stress(CBSS)was developed in this study.The PISF consists of an open bottom sediment erosion chamber and an electrically-driven pump.Unlike most existing in situ flumes with similar designs,the new PISF does not rely on monitoring the flow conditions or particle density in the sediment erosion chamber;instead,it is a pre-calibrated flume.The calibration was performed by first determining CBSS of various selected sediment samples of known particle size and density(using the law of the wall),based on flow velocity-depth profiles measured in a 6 m straight open-channel flume using a Particle Image Velocimetry(PIV)system.These same particles of known CBSS were then used in the new in-situ flume under controlled lab conditions to obtain a series of calibration curves of CBSS vs.pump electrical power.A wide variety of particle types and sizes(simulated sediments)were used in this two-step calibration procedure to widen CBSS measurement range and simulate cohesive force effects.The size of the PISF is much smaller and more practical than other similar devices as lamellar flow conditions are not required and it can be applied to a wide range of sediment types including cohesive sediments.     

Sedimentary records of the late Early Cretaceous compressional setting in the South China block: A case study of the Xingning Basin,Guangdong Province

Recently, some scholars have proposed that the South China Block (SCB) was controlled by a compressive tectonic regime in the middle–late Early Cretaceous, challenging the belief that the SCB was under an extensional setting during the Cretaceous. The Early Cretaceous tectonic setting constraint in the SCB can offer vital insight to clarify the Mesozoic subduction history of the Paleo-Pacific. Therefore, to determine the SCB tectonic regime during the Early Cretaceous, this study investigated sedimentary rocks from the Lower Cretaceous Heshui Formation in the Xingning Basin, a foreland basin located in the southeastern SCB. Provenance analysis was performed using sandstone modal analysis, sandstone geochemical characteristics, and detrital zircon geochronology. Based on the results, we discussed basin sediment sources and the SCB tectonic regime during the Early Cretaceous. The results showed that the maximum Heshui Formation depositional age was 103 Ma ± 1.6 Ma in the Early Cretaceous Albian. Detrital framework modes and geochemical characteristics of sandstone indicated that Heshui Formation's source rocks were granites and sedimentary rocks. The detrital zircon U–Pb ages could be classified into two major and four subordinate age populations. The Wuyi Terrane to the north and southeast coastal regions to the east were the primary potential Heshui Formation source areas. However, the lower and upper sandstones are different in the peak ages, ~437 and ~146 to 104 Ma, respectively, indicating that the major source area shifted from the Wuyi Terrane to the southeastern coastal regions during the late Early Cretaceous. The sandstone modal analysis results indicated that the source area comprised mainly collisional–orogenic material. The SCB was under a compressive tectonic regime during the late Early Cretaceous and this compression action continued until at least 103 Ma ± 1.6 Ma.     

京津冀一次飑线过程的精细时空演变特征分析

利用常规探空资料、多普勒天气雷达资料和风廓线雷达资料对2013年3月19日夜里到20日凌晨发生在湖南中南部和广东北部的一次区域性雷暴大风天气进行了分析,发现本次强对流天气过程的天气尺度背景是北支高压脊的崩溃和南支槽的建立,槽前出现较强的低空急流和切变线并在湖南中南部和广东北部形成了上干冷下暖湿的温湿配置结构下发生并强烈发展的;地面自动站观测显示北风侵入到前期露点温度较高的贵州黄平地区并形成风向辐合触发了对流,之后对流单体东移进入前期地面辐合线和露点锋相配合,同时500 hPa极为干冷的湖南中部偏南地区不断发展加强成对流带;雷达观测显示19日夜里在湖南西部不断出现对流单体并在其东移南下过程中最终形成飑线结构,该飑线中存在多个超级单体;通过多普勒天气雷达的中气旋产品与雷暴大风出现时间对应比较发现：大多数由中气旋引发的雷暴大风,在雷暴大风出现前2~3个体扫,其中气旋底高不断下降至2 km左右或以下,且在雷暴大风出现前1~2个体扫,中气旋的最强切变高度显著下降至中气旋底高位置附近;通过风廓线雷达数据与雷暴大风出现时间对应比较发现：底层大气折射率结构常数(C2n)大幅度的跃升通常在雷暴大风出现前10~15 min左右出现,其对雷暴大风的出现可能具有一定的指示意义。基于雷达资料快速更新四维变分同化（RR4DVar）分析系统,利用京津冀6部新一代多普勒天气雷达资料和区域（约700个）自动站资料对2013年7月30—31日京津冀地区一次飑线系统在移动过程中系统不同部位的热动力结构及其环境场时空演变特征进行了分析。结果表明,这次飑线过程是在有利的天气尺度背景形势下发生发展的。飑线形成初期,其中段和南段前部有强的暖湿空气辐合上升运动,并受到强的中层垂直风切变的影响,且在飑线中南段两侧水平正负涡度近似平衡,这种环境下,十分有利于飑线中南段的组织发展。而北段前部受弱的中层垂直风切变及辐散下沉运动影响,不利于北段系统有组织的发展;随着飑线移动下山,中段和南段前部在较强的中层垂直风切变控制下,出现强的暖湿空气辐合上升运动,且存在偏南暖湿气流稳定输送到系统上升运动区中,这对飑线系统中段和南段自身对流单体新生及高度组织化极为有利。随着飑线演变为弓形回波,中段环境场仍维持强的中层垂直风切变且位于冷池出流边界的控制之下,由于地形强迫效应,有利于弓形回波前沿低空偏南暖湿气流的辐合上升,是飑线下山迅速增强并发展成弓形回波,且稳定维持的主要原因。     

粤东塘唇石英脉型钨(锡)矿床地质特征、成矿时代及其找矿意义

塘唇钨(锡)矿是近年来新发现的一个具有大型规模找矿潜力的石英脉型矿床.矿床产于粤东龙窝花岗闪长岩岩体西部外接触带,赋矿地层为下侏罗统金鸡组碎屑岩,该层位是南岭及邻区石英脉型钨锡矿的最新赋矿地层.在详细的野外地质调查基础上,对矿床含钨石英脉中的白云母进行⁴⁰Ar-³⁹Ar测年,获得白云母⁴⁰Ar-³⁹Ar坪年龄为150±1 Ma,等时线年龄为149±2 Ma(MSWD=1.20),它们在误差范围内一致,为南岭地区燕山早期大规模成岩成矿作用高峰期的产物.塘唇钨(锡)矿的发现,不仅拓宽了石英脉型钨锡矿的找矿视野,还有助于完善石英脉型钨锡矿成矿规律和成矿模式,对区域下一步找矿具有重要指导意义.     

高效液相色谱法测定贵州铜仁地区优质矿泉水中16种多环芳烃

本文使用高效液相色谱仪对贵州铜仁地区优质矿泉水中16种多环芳烃进行分析测试,研究了测定优质矿泉水中多环芳烃的方法,并进行了方法验证和实际样品测试,对仪器柱温箱温度和萃取溶剂种类等条件进行优化,选出最适条件。建立的检测方法线性关系良好(R2均大于0. 999 0),检出限为0. 002 6 0. 009 8μg/L,16种多环芳烃的回收率为73. 87%116. 16%,替代物十氟联苯的回收率为70. 17%85. 61%,方法精密度(RSD)为0. 85%16. 77%。方法前处理过程简单,有利于实际样品快速分析,在贵州铜仁地区优质矿泉水资源调查项目中发挥重要作用。