温石棉通过活性氧激活线粒体通路诱导A549细胞凋亡的机制研究

探讨活性氧(reactive oxygen species,ROS)在温石棉激活线粒体通路诱导A549凋亡中的作用。采用不同浓度温石棉粉尘染毒人肺上皮细胞(A549)后,MTT法检测细胞存活率,流式细胞术检测ROS抑制剂N-乙酰半胱氨酸(N-acetyl-L-cysteine,NAC)预处理前后的细胞凋亡率、胞内ROS水平及线粒体膜电位,Western Blot法检测各组细胞半胱天冬氨酸蛋白酶3(caspase-3)、p53蛋白表达水平。实验结果显示,温石棉可降低A549细胞存活率,呈现时间-剂量效应关系;NAC可显著减少胞内ROS水平、阻止线粒体膜电位下降,并下调caspase-3、p53蛋白的表达水平,抑制部分细胞凋亡的发生。表明ROS可通过诱导p53蛋白过表达,激活线粒体凋亡通路,诱导A549细胞发生凋亡。     

PM2.5降尘对A549细胞线粒体氧化损伤的影响

将不同浓度PM_(2.5)降尘作用于A549细胞后,利用MTT法检测其存活率,W-G染色观察细胞形态,荧光探针法检测细胞ROS和MMP相对水平,以探讨PM_(2.5)降尘对A549细胞线粒体氧化损伤的影响及作用机制。结果显示,经12. 5μg/m L的PM_(2.5)降尘作用A549细胞3 h后,细胞存活率为(81. 77±6. 15)%,并随作用浓度及时间增加呈递减趋势。PM_(2.5)染毒后可观察到细胞形态不规则,胞膜溶解破坏,细胞微核出现。PM_(2.5)降尘作用于细胞24 h后,胞内ROS相对含量随暴露浓度增加呈递增趋势,细胞MMP相对水平随染毒浓度增加而降低,且胞内ROS和MMP两者间存在显著相关关系(R2=0. 878)。提示PM_(2.5)降尘处理A549细胞后可通过刺激ROS的产生,诱导细胞MMP下降,造成细胞线粒体氧化损伤。     

华北克拉通北缘东段“开原岩群”的解体及重新认识

根据近年来的同位素年代学资料,对分布于辽北地区的一套构造变质岩系（"开原岩群"或"清河镇岩群"）进行了重新认识和划分,并将其重新定义为清河构造混杂岩,由中太古代、新太古代、中元古代、新元古代、二叠纪等不同时代、不同构造环境的地质体组成.其中,中太古代、新太古代、中元古代岩石来自华北克拉通,而新元古代、二叠纪岩石则来自兴蒙造山带.将原沈家堡子岩组重新划分为新太古代变质表壳岩和中-新太古代变质深成岩,原板石沟岩组（或芦家堡子岩组）厘定为中元古代石门岩组,原照北山岩组重新划分为新元古代南平岩片和晚二叠世照北山岩组,将原佟家屯岩组和尖山子火山岩合并为晚二叠世佟家屯岩组.最后,提出了清河构造混杂岩带为华北克拉通与兴蒙造山带的界线以及古亚洲洋在华北板块北缘东段的最终闭合时间为中三叠世早期（约245Ma）的认识.     

Investigation of gas content of organic-rich shale:A case study from Lower Permian shale in southern North China Basin,central China

Measuring gas content is an essential step in estimating the commerciality of gas reserves. In this study,eight shale core samples from the Mouye-1 well were measured using a homemade patented gas desorption apparatus to determine their gas contents. Due to the air contamination that is introduced into the desorption canister, a mathematical method was devised to correct the gas quantity and quality.Compared to the chemical compositions of desorbed gas, the chemical compositions of residual gas are somewhat different. In residual gas, carbon dioxide and nitrogen record a slight increase, and propane is first observed. This phenomenon may be related to the exposure time during the transportation of shale samples from the drilling site to the laboratory, as well as the differences in the mass, size and adsorptivity of different gas molecules. In addition to a series of conventional methods, including the USBM direct method and the Amoco Curve Fit(ACF) method, which were used here for lost gas content estimation, a Modified Curve Fit(MCF) method, based on the 'bidisperse' diffusion model, was established to estimate lost gas content. By fitting the ACF and MCF models to gas desorption data, we determined that the MCF method could reasonably describe the gas desorption data over the entire time period, whereas the ACF method failed. The failure of the ACF method to describe the gas desorption process may be related to its restrictive assumption of a single pore size within shale samples. In comparison to the indirect method, this study demonstrates that none of the three methods studied in this investigation(USBM, ACF and MCF) could individually estimate the lost gas contents of all shale samples and that the proportion of free gas relative to total gas has a significant effect on the estimation accuracy of the selected method. When the ratio of free gas to total gas is lower than 45%, the USBM method is the best for estimating the lost gas content, whereas when the ratio ranges from 45% to 75% or is more than 75%, the ACF and MCF methods, are the best options respectively.     

Upscaling permeability for three-dimensional fractured porous rocks with the multiple boundary method

Upscaling permeability of grid blocks is crucial for groundwater models. A novel upscaling method for three-dimensional fractured porous rocks is presented. The objective of the study was to compare this method with the commonly used Oda upscaling method and the volume averaging method. First, the multiple boundary method and its computational framework were defined for three-dimensional stochastic fracture networks. Then, the different upscaling methods were compared for a set of rotated fractures, for tortuous fractures, and for two discrete fracture networks. The results computed by the multiple boundary method are comparable with those of the other two methods and fit best the analytical solution for a set of rotated fractures. The errors in flow rate of the equivalent fracture model decrease when using the multiple boundary method. Furthermore, the errors of the equivalent fracture models increase from well-connected fracture networks to poorly connected ones. Finally, the diagonal components of the equivalent permeability tensors tend to follow a normal or log-normal distribution for the well-connected fracture network model with infinite fracture size. By contrast, they exhibit a power-law distribution for the poorly connected fracture network with multiple scale fractures. The study demonstrates the accuracy and the flexibility of the multiple boundary upscaling concept. This makes it attractive for being incorporated into any existing flow-based upscaling procedures, which helps in reducing the uncertainty of groundwater models.     

Effects of Wave–Current Interaction on Salt Intrusion During a Typhoon Event in a Highly Stratified Estuary

Wave–current interaction (WCI) is important in modulating hydrodynamics and water mixing in estuaries, and thereby the transport of water-borne materials. However, the effects of WCI on salt transport and salt intrusion in estuaries during storm events have been rarely examined. In the present study, we use a coupled atmosphere–ocean–wave–sediment transport (COAWST) modeling system to investigate the effects of WCI on salt intrusion in the highly stratified Modaomen Estuary during Typhoon Hagupit (2008). The model is validated by the measured wave, water elevation, and surface salinity data, and several diagnostic model experiments are conducted. WCI increases the storm surge by 0.8 m at the peak surge (25% of the total surge height). The wave-breaking-induced momentum flux and the Stokes drift increase the magnitude of the landward flow by 0.3 m s^?1 (30% of the total landward flow). In addition, the waves increase water mixing by 2–4 times compared with that without waves. Hence, WCI significantly increases the landward advective salt transport and decreases the steady shear transport. The net effect of the WCI is a significant increase of salt import and salt intrusion during the typhoon event. However, in the aftermath of the storm, the imported salt water is rapidly flushed out by the increased river discharge, and the estuary regains its stratification within one day.     

Application of incomplete similarity theory to the estimation of the mean velocity of debris flows

The mean velocity of debris flow is one of the most important parameters in the design of mitigation structures and in quantitative risk analysis. This study develops a model to predict the mean debris flow velocity observed in the field by applying the incomplete similarity argument. An equation for estimating the Darcy-Weisbach resistance coefficient for debris flows with a volumetric sediment concentration larger than 0.19 is accordingly derived using 128 sets of observation data from nine Chinese gullies, in which both the effect of the volumetric sediment concentration and channel slope on resistance are considered. The derived equation is then verified and compared against five previously published equations by using 61 sets of published observation data from six gullies located in four countries. The applications of the proposed equation are discussed, and the improvements made using the proposed equation are clearly very significant when compared with the previously published equations.     

Application of magnetic adsorbent with silicate and phenyl polymers to adsorb Rhodamine B

The extensive use of Rhodamine B (RhB) for textile, paper, pigment, food, cosmetic, and drug manufacturing and its indiscriminate disposal leads to serious human, biological, and environmental hazards. A magnetic adsorbent with silicate and phenyl polymers (Ph/SiO₂/Fe₃O₄) has been prepared to absorb RhB. The morphology and structure of the adsorbents have been characterized by TGA, XRD, FTIR, and adsorption–desorption measurement. The results revealed that Ph/SiO₂/Fe₃O₄ exhibited a paramagnetic behavior and could easily and quickly be separated from a suspension. The RhB adsorption behavior was almost pH independent due to the adsorption between the phenyl ring of Ph/SiO₂/Fe₃O₄ and RhB by π–π electron-donor–acceptor interactions. The adsorption behavior of RhB adsorption was in good agreement with the Langmuir adsorption isotherm, and the maximum adsorption capacity was 142.186 mg g^?1. Good desorption performance of Ph/SiO₂/Fe₃O₄ showed that this novel magnetic adsorbent cannot only be activated by ethanol extraction process but also reuse by the recovery of magnetic force.     

Probabilistic calibration of a coupled hydro-mechanical slope stability model with integration of multiple observations

Multiple types of responses, such as displacements, ground water level, pore water pressures, water contents, etc., are usually measured in comprehensive monitoring programmes for rainfall-induced landslide prevention. In this study, a probabilistic calibration method for coupled hydro-mechanical modelling of slope stability is presented with integration of multiple types of measurements. A numerical example of a soil slope under rainfall infiltration is illustrated to compare the effects of single and multiple types of responses on parameter estimation and model calibration. The results show that the soil parameters can be estimated with less uncertainty and total uncertainty bounds are narrower with multiple types of responses than with a single type of response. Model calibration based on multiple types of responses can compromise different responses and hence the means and standard deviations of model error are the smallest. A feasible correlation coefficient between soil modulus and permeability can be obtained from model calibration with multiple types of responses and single type of response as long as the responses include displacement data.     

A simple approach to evaluating leakage through thin impervious element of high embankment dams

Internal erosion is the most common reason which induces failure of embankment dams besides overtopping. Relatively large leakage is frequently concentrated at defects of impervious element, and this will lead to eventual failure. The amount of leakage depends not only on integrity of impervious element, but also on dam height, shape of valley, shape of impervious element and water level in reservoir. The integrity of impervious element, which represents the relative level of seepage safety, is not easy to be determined quantitatively. A simple method for generalization of steady seepage state of embankment dams with thin impervious element is proposed in this paper. The apparent overall value of permeability coefficient for impervious element can be obtained by this method with reasonable accuracy and efficiency. A defect parameter of impervious element is defined as an index to characterize seepage safety of embankment dams. It equals the ratio of the apparent overall value of permeability coefficient to the measured value in laboratory for intact materials. Subsequently, seepage safety of three dams is evaluated and the evolution of defect level of impervious element of dams is investigated. It is proved that the newly proposed method in this paper is feasible in the evaluation of relative seepage safety level of embankment dams with thin impervious element.