Thermodynamic stability of CoOOH and its coprecipitation with manganese

A precipitate of cobalt oxyhydroxides formed by bubbling oxygen through a dilute solution of Co(NO₃)₂ held at pH 9.0 and 25°C was aged for 23 months in contact with the original solution, with access to atmospheric oxygen. Co₃O₄ and CoOOH were identified in the precipitate by X-ray diffraction. Chemical equilibria involving these solids were evaluated by measurements of solution pH and Co²⁺ activities and by redox potential measurements and gave a $\text{ΔG}{}_{\mathrm{coOOH}}{}^0$ of $\text{?92.3 ± 0.5 kcal/mole}$. This value and other thermodynamic data show relative feasibility of hypothetical reaction steps and changes in reaction paths during automated coprecipitation titrations and subsequent aging of a precipitate that finally contained βMnOOH, MnO₂ (birnessite) and CoOOH.     

Annual cycle of kepone® residue and lipid content of the estuarine clam,Rangia cuneata

Factors affecting Kepone uptake and lipid content of the clam,Rangia cuneata, were tested over a 12 month study. Clams obtained from the Rappahannock and James Rivers were held in submersible liver boxes at two sites in the James River estuary and were sampled monthly from September 1978 through August 1979. Clams held in the freshwater zone near the source of Kepone contamination (Hopewell, Virginia) generally had higher Kepone and lipid content than those held downstream in the oligohaline zone. Significant differences in Kepone content between test sites and months are largely, but not entirely, a function of ambient water temperature, dissolved oxygen, amount of lipid in the clam, turbidity, Kepone content of the water column and duration of exposure. Lipid content of clams varied significantly between test sites, river of origin and months and is significantly related to salinity, ambient water temperature, pH and duration of exposure. Kepone content was more closely correlated with total lipid stores of clams than any other real variable. This association may be due to lipid reserves acting as a storage site for Kepone, but may also be interpreted as the result of selection against clams lacking lipid stores that might act as reservoirs for Kepone thus protecting more delicate tissues.     

Mineral equilibria in the six-component seawater system,Na-K-Mg-Ca-SO4-Cl-H2O at 25°C. II: Compositions of the saturated solutions

Using the solubility model developed by Harvie and Weare (1980), the stable mineral-solution assemblages for the six-component system Na-K-Mg-Ca-SO₄-Cl-H₂O and its constituent 5-, 4- and 3-component systems at 25°C have been defined. Invariant point maps have been constructed showing the connections by univariant lines. The solubility volumes for all 20 minerals considered are also illustrated. Of the 37 invariant points, only 3 have solutions which are Ca-rich; the remaining 34 can be plotted in the reciprocal system Na-K-Mg-SO₄-Cl, which is similar to the seawater system, except that the restriction of halite saturation has been removed. Application of these results and implications for the evolution of major brine types are briefly discussed.     

pp′-DDT adsorption to suspended particulate matter in sea water

A procedure was devised to study pp′-DDT [2,2-bis($\text{p-}\text{chlorophenyl}$)-1,1,1-trichloroethane] adsorption and desorption to suspended particulates in aqueous solutions. DDT adsorption to a marine sediment, sediment fractions, clay and humic acid suspended in sea water was investigated and the humic fraction was found to have a greater adsorbing capacity than the clay or sediment. Removal of the humic fraction from sediment reduced the adsorption capacity to less than 60 per cent of the original sediment sample. It was concluded that suspended humic particulates may be important agents for transporting chlorinated hydrocarbons through the water column and for concentrating them in sediments and in detritus-feeding organisms.     

Modelling of major elements in mantle-melt systems using trace element approaches

Major elements can be modelled in ways similar to the quantitative petrogenetic modelling used for trace elements. In contrast to modelling with trace elements, however, modelling with major elements is constrained by the stoichiometry of the solid phases. Within these constraints, the same equations for partial melting and crystallization which have been used to such advantage for trace elements may be used for major elements.Calculated MgO and FeO abundances in a mantle-melt system are used as an example of the modelling technique. Such modelling yields limited fields of permissible melts and residues for a given parent composition, but does not give the paths of melting. It does allow the temperature and extent of melting which gave rise to a melt to be determined from the MgO and FeO abundances of the melt or residual solid. Applying the results of the modelling to igneous rocks and ultramafic nodules leads to the following conclusions, which are subject to the uncertainties in the available distribution coefficients. Least differentiated basalt glasses from the ocean floor are derived from parent melts with less than 15.5 weight % MgO and 8.2 wt. % FeO. Komatiites may be derived by less than 60% melting of a pyrolite source leaving a residue of olivine and pyroxene. Many nodules from the subcontinental mantle appear to be residues of large fractions of melting (>30%) at high temperature and pressure, whereas ultramafic nodules from oceanic basalts appear to be residues of smaller fractions of melting (<30%) at lower temperatures and pressures.     

Heat-producing elements in the lunar mantle: Insights from ion microprobe analyses of lunar pyroclastic glasses

We provide new estimates for the abundance of heat-producing elements in the lunar mantle by using SIMS techniques to measure the concentrations of thorium and samarium in lunar pyroclastic glasses. Lunar pyroclastic glasses are utilized in this study because they represent quenched products of near-primary melts from the lunar mantle and as such, they provide compositional information about the mantle itself. Thorium and samarium were measured because: (1) Th is not significantly fractionated from Sm during partial melting of the pyroclastic glass source regions, which are dominated by olivine and pyroxene. Therefore, the Th/Sm ratios that we measure in the pyroclastic glasses reflect the Th/Sm ratio of the pyroclastic glass source regions. (2) Strong correlations between Th, U, and K on the Moon allow us to use measured Th concentrations to estimate the concentrations of U and K in the pyroclastic glasses. (3) Th, Sm, U, and K are radioactive elements and as such, their concentrations can be used to investigate heat production in the lunar mantle.The results from this study show that the lunar mantle is heterogeneous with respect to heat-producing elements and that there is evidence for mixing of a KREEP component into the source regions of some of the pyroclastic glasses. Because the source regions for many of the glasses are deep (?400 km), we propose that a KREEP component was transported to the deep lunar mantle. KREEP enriched sources produce 138% more heat than sources that do not contain KREEP and therefore, could have provided a source of heat for extended periods of nearside basaltic magmatism. Data from this study, in conjunction with models for the fractional crystallization of a lunar magma ocean, are used to show that the average lunar mantle contains 0.15 ppm Th, 0.54 ppm Sm, 0.039 ppm U, and 212 ppm K. This is a greater enrichment in radiogenic elements than some earlier estimates, suggesting a more prolonged impact of radiogenic heat on nearside basaltic volcanism.     

The Wuchiapingian–Changhsingian boundary (Upper Permian) at Meishan of Changxing County, South China

Section D at Meishan, Changxing County in the Zhejiang Province, China, has been extensively studied in various aspects of the stratigraphy during the past 20 years. It was ratified by the International Union of Geological Sciences (IUGS) as the Global Standard Stratotype Section and Point (GSSP) for the Permian–Triassic boundary in 2000, and is also a potential stratotype for the Wuchiapingian–Changhsingian boundary. However, the contact relationship between the Longtan (Wuchiapingian) and Changxing (Chainghsingian) formations has been a controversial subject for years. Recent studies on Section C, about 300 m west of Section D, at Meishan confirm a complete depositional succession around the boundary and suggest that the proposed boundary level, the FAD of Clarkina wangi within the lineage from C. longicuspidata to C. wangi, is consistent with the first appearance of the index Changhsingian fusulinid Palaeofusulina sinensis and tapashanitid ammonoids.     

Asymmetric vegetation responses to mid-Holocene aridity at the prairie-forest ecotone in south-central Minnesota

The mid-Holocene (ca. 8000-4000 cal yr BP) was a time of marked aridity throughout much of Minnesota, and the changes due to mid-Holocene aridity are seen as an analog for future responses to global warming. In this study, we compare the transition into (ca. 9000-7000 yr ago) and out of (ca. 5000-2500 yr ago) the mid-Holocene (MH) period at Kimble Pond and Sharkey Lake, located along the prairie forest ecotone in south-central Minnesota, using high resolution (∼ 5-36 yr) sampling of pollen, charcoal, sediment magnetic and loss-on-ignition properties. Changes in vegetation were asymmetrical with increasing aridity being marked by a pronounced shift from woodland/forest-dominated landscape to a more open mix of grassland and woodland/savanna. In contrast, at the end of the MH, grassland remained an important component of the landscape despite increasing effective moisture, and high charcoal influxes (median 2.7-4.0 vs. 0.6-1.7 mm² cm^− 2 yr^− 1 at start of MH) suggest the role of fire in limiting woodland expansion. Asymmetric vegetation responses, variation among and within proxies, and the near-absence of fire today suggest caution in using changes associated with mid-Holocene aridity at the prairie forest boundary as an analog for future responses to global warming.     

The geoarchaeology of Iron Age “moated” sites of the Upper Mae Nam Mun Valley,N.E. Thailand. I: Palaeodrainage,site–landscape relationships and the origins of the “moats”

The study focuses on the “moated” Iron Age sites of N.E. Thailand, first identified as significant prehistoric settlement sites in the 1940s from aerial photography. Two more recent photograph sets are used to map the surficial geology and prehistoric site distribution for a study area west of Phimai, N.E. Thailand, with a focus on site–landscape relationships and, in particular, relationships between site location and form and patterns of palaeodrainage. The derived record of the surficial geology reflects several phases of palaeodrainage, characterized by differing locations and types of former river channels. Of note is the differentiation between a recent period in which river channels, including those presently active, are single-string meandering channels, and an older period of broad belts of meandering multistring channels. The prehistoric site distribution correlates closely with the older drainage, and for many, the encircling channels (the “moats”) are closely associated with former river channels. These relationships provide a critical and novel model for site distribution; several implications arise, supported by emerging field evidence, and introducing issues for archaeological debate: (i) there is no need, as has been done in the past, to invoke prehistoric artificial forms of drainage associated with the sites; (ii) the definition of the encircling channels as “moats” is seriously called into question; and (iii) the inferred geomorphological evolution of the floodplain implies past changes in environmental parameters such as run-off, climate or biophysical environments. Since the sites are all located in or beside ancient meander belts, these parameters should now be introduced into archaeological discussions regarding the establishment, history, evolution, and abandonment of the Iron Age sites. Methodologically, this article illustrates the need to be aware of the complexity of aerial photograph interpretation in archaeological survey, showing that careful analysis of aerial photograph information may have a significant impact upon the modeling of prehistoric interpretations. Further stratigraphical studies will be reported subsequently, and will refine the models presented here. © 1999 John Wiley & Sons, Inc.