A nonstationary parameter model for the sandstone creep tests

The rock masses of hydro-fluctuation belt experience seepage pressure following impoundment in the Three Gorges Reservoir; its creep behaviors are significant for reservoir bank slopes. To study the creep behaviors under seepage pressure (0, 1.45, and 1.75 MPa), we performed creep tests using representative landslide sandstone in the Three Gorges Reservoir and investigated the sandstone creep behaviors under the coupling effects of seepage pressure and stress. Previous researches on rocks have usually regarded the creep constitutive parameter as a constant; however, in this study, a nonlinear, nonstationary, plastic-viscous (NNPV) creep model which can describe the curve of sandstone creep tests is proposed. The rock-creep parameters under three levels of seepage pressure were identified, and theoretical curves using the NNPV model agreed well with the experimental data, indicating that the new model cannot only describe the primary creep and secondary creep stages under varying seepage pressures but also, in particular, perfectly describes the tertiary creep stage. Finally, the sensitivity of the NNPV model parameters is analyzed, and the result shows that the nonstationary coefficient α and the nonlinear coefficient m are main parameters affecting the tertiary creep stage.     

Numerical analysis of effect of baffle configuration on impact force exerted from rock avalanches

In mountainous areas, channelized rock avalanches swarm downslope leading to large impact forces on building structures in residential areas. Arrays of rock avalanche baffles are usually installed in front of rigid barriers to attenuate the flow energy of rock avalanches. However, previous studies have not sufficiently addressed the mechanisms of interaction between the rock avalanches and baffles. In addition, empirical design approaches such as debris flow (Tang et al., Quat Int 250:63–73, 2012), rockfall (Spang and Rautenstrauch, 1237–1243, 1988), snow avalanches (Favier et al., 14:3–15, 2012), and rock avalanches (Manzella and Labiouse, Landslides 10:23–36, 2013), which are applied in natural geo-disasters mitigation cannot met construction requirements. This study presents details of numerical modeling using the discrete element method (DEM) to investigate the effect of the configuration of baffles (number and spacing of baffle columns and rows) on the impact force that rock avalanches exert on baffles. The numerical modeling is firstly conducted to provide insights into the flow interaction between rock avalanches and an array of baffles. Then, a modeling analysis is made to investigate the change pattern of the impact force with respect to baffle configurations. The results demonstrate that three crucial influencing factors (baffle row numbers, baffle column spacing, and baffle row spacing) have close relationship with energy dissipation of baffles. Interestingly, it is found that capacity of energy dissipation of baffles increases with increasing baffle row numbers and baffle row spacing, while it decreases with increasing baffle column spacing. The results obtained from this study are useful for facilitating design of baffles against rock avalanches.     

Development mechanism for the landslide at Xinlu Village,Chongqing, China

Due to the continuous and intense rainfall from June 26 to 28, 2016, Xinlu Village in Ganshui Town, Qijiang District, Chongqing, experienced a unitary-slip landslide at approximately UTC+8 19:30 on June 28. This landslide disrupted the Chuan-Qian railway and damaged four residential buildings. To analyze and rehabilitate the landslide, the engineering geology, hydrological conditions, and deformation instability mechanism of this landslide were investigated and comprehensively analyzed based on an in situ survey, geophysical drilling, and a laboratory quick-shearing test. The results show that the landslide is a typical gradual progressive landslide.     

Hydrochemical,isotopic, and reservoir characterization of the Pasinler (Erzurum) geothermal field,eastern Turkey

The reservoir temperature and conceptual model of the Pasinler geothermal area, which is one of the most important geothermal areas in Eastern Anatolia, are determined by considering its hydrogeochemical and isotope properties. The geothermal waters have a temperature of 51 °C in the geothermal wells and are of Na–Cl–HCO₃ type. The isotope contents of geothermal waters indicate that they are of meteoric origin and that they recharge on higher elevations than cold waters. The geothermal waters are of immature water class and their reservoir temperatures are calculated as 122–155 °C, and their cold water mixture rate is calculated as 32%. According to the δ¹³C_VPDB values, the carbon in the geothermal waters originated from the dissolved carbon in the groundwaters and mantle-based CO₂ gases. According to the δ³⁴S_CDT values, the sources of sulfur in the geothermal waters are volcanic sulfur, oil and coal, and limestones. The sources of the major ions (Na⁺, Ca²⁺, Mg²⁺, Cl^?, and HCO₃ ^?) in the geothermal waters are ion exchange and plagioclase and silicate weathering. It is determined that the volcanic rocks in the area have effects on the water chemistry and elements like Zn, Rb, Sr, and Ba originated from the rhyolite, rhyolitic tuff, and basalts. The rare earth element (REE) content of the geothermal waters is low, and according to the normalized REE diagrams, the light REE are getting depleted and heavy REE are getting enriched. The positive Eu and negative Ce anomalies of waters indicate oxygen-rich environments.     

Geodetic observation crucial to sea level monitoring

The relative rate of rise of the sea levels measured by a tide gauge is made of a sea and a land component. The first is usually restricted to the global short-term effect of melting icecaps and expansion of water mass due to global temperature change. The second is often limited to the regional long-term effects of glacial isostatic adjustment (GIA). Sometimes, the regional subsidence, due to compaction and ground water withdrawal, is considered. Here we show as this assumption of regional subsidence fails to represent the relative sea level patterns of Sandy Hook, NJ, and The Battery, NY, as well as of Venezia Punta Della Salute, Venezia II, Trieste and Trieste II. The subsidence of the tide gauge instrument may only be addressed by the precise monitoring of the tide gauge vs. a Global Navigation Satellite System (GNSS) antenna, even if the GNSS tracking is only recent and not yet very accurate. The relative sea level records are much more complicated than what is thought.     

Development and verification of the comprehensive model for physical properties of hydrate sediment

Natural gas hydrate is widely distributed all over the world and may be a potential resource in the near future, whereas hydrate dissociation during the development affects wellbore stability and drilling safety. However, the present modeling of hydrate reservoir parameters ignored the influence of effective stress and only considered the hydrate saturation. In this paper, a series of stress sensitivity experiments for the unconsolidated sandstone were carried out, and the influence of mean effective stress on physical parameters was obtained; a comprehensive model for the physical parameters of hydrate reservoir was developed subsequently. With the help of ABAQUS finite element software, the established comprehensive model was verified by the use of the wellbore stability numerical model of hydrate reservoir. The verification results show that ignoring the effect of mean effective stress on the parameters of hydrate formation aggravates the invasion of drilling fluid into the hydrate formation. Besides, ignoring the stress sensitivity of reservoir physical parameters will underestimate the wellbore instability during hydrate drilling, which will be a threat to the safety of gas hydrate drilling. At the end of the drilling operation, the maximum plastic strain of the model for considering and not considering stress sensitivity was 0.0145 and 0.0138, respectively. Therefore, the established comprehensive model will provide a theoretical support for accurately predicting the engineering geological disasters in hydrate development process.     

Coastal erosion in the south-eastern Mediterranean: case of beaches in North Tunisia

This research is conducted as part of a Spanish International Cooperation Agency project with the aim to investigate the sustainable protection of Tunisian coastal zones, as in the case of Beni Khiar and Dar Chaabane coasts (Hammamet Gulf) separated by Oued El Kebir river. The sedimentary dynamic of these beaches is studied in order to identify the main causes responsible for their erosion by the use of different approaches of in situ measurements and numerical methods. Geophysical surveys and sedimentary analyses have demonstrated that sediments are finer and less carbonated from Beni Khiar to Dar Chaabane. Then, the shoreline mapping of several missions of aerial photos has illustrated a mean shoreline retreat between 3 and 4 m/year. In terms of sand volume, a sediment loss more than 30,000 m³/year at Dar Chaabane has been observed since the hill lake structures were built within Oued El Kebir river in 1996. Finally, modelled hydrodynamic and sedimentary patterns have illustrated the refraction of waves in deep water close to shoals and a high-energy concentration along Dar Chaabane coast. The sediment transport direction is mainly of NE-SW induced by ESE-SE wave-driven alongshore current. Results provided by these approaches have shown the importance of Oued El Kebir sediment yield in supplying the neighbouring beaches. Changes in sedimentary dynamics are affected by the modification of hydrodynamic patters caused by the presence of hydrological dams and the implementations of hotels close to the shoreline. This finding underlines the key role of Oued El Kebir fluvial activity in controlling the equilibrium of beaches and their sensitivity to coastal managements induced by man activities, as in the case of the most Mediterranean beaches.     

Late Cretaceous–Early Paleogene tectonic events at Farafra-Abu Minqar Stretch,Western Desert,Egypt: results from calcareous plankton

This work depends on integrated high-resolution calcareous plankton nannofossil and foraminiferal biostratigraphic analyses for three Upper Cretaceous-Lower Paleogene successions at Farafra-Abu Minqar area, Western Desert, Egypt. These sections are distributed in a north-south geologic profile as follows: El Aqabat, North Gunna, and Abu Minqar. Lithostratigraphically, four formations are recorded in the study area, namely, Khoman (at base), Dakhla, Tarawan, and Esna (at top). In the north at El Aqabat section, Khoman Formation (carbonate facies) is only represented which changes partially toward the south to Dakhla Formation (siliciclastic facies). In the extreme south at Abu Minqar section, it changes completely into siliciclastic facies of Dakhla Formation. Biostratigraphically, seven calcareous nannofossil and eleven planktonic foraminiferal zones represent the Late Cretaceous-Early Paleogene are identified. Based on the occurrence or missing of these zones accompanied with the field criteria resulted in detecting four tectonic events. These tectonic events took place at the Cretaceous/Paleogene (K/Pg), the Danian/Selandian (D/S), the Selandian/Thanetian (S/T), and the Paleocene/Eocene (P/E) boundaries. These tectonic events are related to the impact of the Syrian Arc System. Four sequence boundaries (SB1, SB2, SB3, and SB4) are defined in the Late Cretaceous-Early Paleogene sequence in the Farafra-Abu Minqar area.