Hydrogeochemical evaluation of Western Anatolian mineral waters

Turkey lies on the Alpine-Himalayan belt which is one of the most important geothermal belts in the World. Therefore, there are numerous mineral waters in Anatolia where geological and tectonic activities are intense. Archeological studies conducted in Anatolia, which is the cradle of various civilizations, reveal the fact that mineral water has been used as a spa in many areas.The scope of this study is to evaluate mineral waters in Western Anatolia and their use in thermal resorts for balneological purposes. In this respect, 50 thermal waters used in spa centers were analyzed for various physical, chemical and bacteriological parameters.Among the 50 waters tested, 40 are thermomineral waters while 10 are acratothermal waters. Some of these waters have distinct chemical compositions. Their temperatures are between 21 and 90 °C. Various types of mineral water source occur within this region: 5 of these are sulfurous, 1 has carbon dioxide, 29 have fluorine, 1 has iodine and 3 are saliferous. The thermomineral sources with saline characteristics have balneotherapy potential for treating skin illnesses including psoriasis and rheumatological illnesses.Some waters with appreciable bicarbonate and sulfate concentrations can also be used for balneotherapy; for example for use as a cure for chronic inflammatory diseases of gastrointestinal and urinary systems. They could also be used as a cure for prophylactic and metaphylactic treatment of urolithiasis.However, among 38 sampling sites, 12 sites are bacteriologically contaminated. This indicates that regulations governing the protection of such zones are not properly enforced and that water sources within these regions are not sufficiently protected or inspected.     

Delineation of surface waterlogged areas in parts of bihar using IRS-1C LISS-III data

Pre-monsoon and post-monsoon surface waterlogged areas were delineated using satellite remote sensing data for Muzaffarpur, Vaishali and Saran districts of North Bihar. Digital data of IRS-1C LISS-III sensor acquired on December 7, 1998 and April 6, 1999 were analyzed using digital image processing software-ERDAS Imagine 8.3.1. The surface waterlogged areas were delineated using modeling technique which is the most advanced and accurate method. Using the modeling technique, a pixel is classified as water if the digital number (DN) value of its Near Infra Red (NIR) band is less than the DN value of the Red band and the Green band, and the Normalized Difference Water Index (NDWI) is greater than or equal to 0.32. The pre-monsoon surface waterlogged areas are found to be 14.02, 23.61 and 9.61 km² while the post-monsoon surface waterlogged areas are found to be 231.83, 118.19 and 176.06 km² for Muzaffarpur, Vaishali and Saran districts, respectively. Also, land use/land cover maps were prepared.     

The Eastern Ghats Belt … A polycyclic granulite terrain

The Eastern Ghats Belt is a polycyclic granulite terrain along the east coast of India whose western boundary is marked by a shear zone along which the granulites are thrusted over the cratonic units of the Indian shield, and its northern margin is marked by the presence of a number of fault-bounded blocks. Recent work has convincingly brought out that there are domains within the belt having different evolutionary histories. The segment south of the Godavari Rift went through a high grade thermo-tectonic event at ∼1.6–1.7 Ga. North of the Godavari Rift in a narrow zone along the western boundary the last high-grade metamorphic event is of late Archaean age. A series of alkaline plutons along the western boundary zone testifies to a rifting episode at ∼1.3–1.5 Ga. In the major part of the EGB the metamorphism is broadly of Grenvillian age, with two major thermo-tectonic pulses at ∼1.1–1.2 Ga and ∼0.95–1.0 Ga. But high grade conditions persisted for a long period and younger thermal events of ∼0.65 Ga to ∼0.80 Ga are locally recorded. There are differences in the tectonometamorphic histories of different domains, but the tectonic significance of these differences remains uncertain. Pan-African (0.50–0.55) thermal overprints are common and become conspicuous along the western boundary zone. The thrusting of the Eastern Ghats granulites in a hot state over the cratons to the west is of Pan-African age. In the Rodinia assembly (∼0.9 Ga) the Eastern Ghats and the Rayner-Napier Complexes of Antarctica were contiguous, but the pre-Rodinia configuration of these terrains remains unclear. At ∼0.8 Ga during the Rodinia break up Greater India rifted apart from East Antarctica, and only later it docked with Australia-East Antarctica at 530–550 Ma. The continuation of the East Antarctic Pan-African orogenic belts into the Eastern Ghats is yet to be ascertained.     

Extraction of Nd isotopes from bulk deep sea sediments for paleoceanographic studies on Cenozoic time scales

Nd isotopes preserved in fossil fish teeth and ferromanganese crusts have become a common tool for tracking variations in water mass composition and circulation through time. Studies of Nd isotopes extracted from Pleistocene to Holocene bulk sediments using hydroxylamine hydrochloride (HH) solution yield high resolution records of Nd isotopes that can be interpreted in terms of deep water circulation, but concerns about diagenesis and potential contamination of the seawater signal limit application of this technique to geologically young samples.In this study we demonstrate that Nd extracted from the > 63 μm, decarbonated fraction of older Ocean Drilling Program (ODP) sediments using a 0.02 M HH solution produces Nd isotopic ratios that are within error of values from cleaned fossil fish teeth collected from the same samples, indicating that the HH-extractions are robust recorders of deep sea Nd isotopes. This excellent correlation was achieved for 94 paired fish teeth and HH-extraction samples ranging in age from the Miocene to Cretaceous, distributed throughout the north, tropical and south Atlantic, and composed of a range of lithologies including carbonate-rich oozes/chalks and black shales. The strong Nd signal recovered from Cretaceous anoxic black shale sequences is unlikely to be associated with ferromanganese oxide coatings, but may be derived from abundant phosphatic fish teeth and debris or organic matter in these samples.In contrast to the deep water Nd isotopic signal, Sr isotopes from HH-extractions are often offset from seawater values, suggesting that evaluation of Sr isotopes is a conservative test for the integrity of Nd isotopes in the HH fraction. However, rare earth elements (REE) from the HH-extractions and fish teeth produce distinctive middle REE bulge patterns that may prove useful for evaluating whether the Nd isotopic signal represents uncontaminated seawater. Alternatively, a few paired HH-extraction and cleaned fish teeth samples from each site of interest can be used to verify the seawater composition of the HH-extractions. The similarity between isotopic values for the HH-extraction and fish teeth illustrates that the extensive cleaning protocol applied to fish teeth samples is not necessary in typical, carbonate-rich, deep sea sediments.     

Comparison of hydrodynamic models of different complexities to model floods with emergency storage areas

A flood emergency storage area (polder) is used to reduce the flood peak in the main river and hence, protect downstream areas from being inundated. In this study, the effectiveness of a proposed flood emergency storage area at the middle Elbe River, Germany in reducing the flood peaks is investigated using hydrodynamic modelling. The flow to the polders is controlled by adjustable gates. The extreme flood event of August 2002 is used for the study. A fully hydrodynamic 1D model and a coupled 1D–2D model are applied to simulate the flooding and emptying processes in the polders and flow in the Elbe River. The results obtained from the 1D and 1D–2D models are compared with respect to the peak water level reductions in the Elbe River and flow processes in the polders during their filling and emptying. The computational time, storage space requirements and modelling effort for the two models are also compared. It is concluded that a 1D model may be used to study the water level and discharge reductions in the main river while a 1D-2D model may be used when the study of flow dynamics in the polder is of particular interest. Further, a detailed sensitivity analysis of the 1D and 1D–2D models is carried out with respect to Manning's n values, DEMs of different resolutions, number of cross-sections used and the gate opening time as well as gate opening/closing duration. Copyright © 2008 John Wiley & Sons, Ltd.     

Measuring statistical isotropy of CMB anisotropy

The statistical expectation values of the temperature fluctuations and polarization of cosmic microwave background (CMB) are assumed to be preserved under rotations of the sky. We investigate the statistical isotropy (SI) of the CMB maps recently measured by the Wilkinson microwave anisotropy probe (WMAP) using the bipolar spherical harmonic formalism proposed in Hajian and Souradeep [Hajian, A., Souradeep, T. (2003) Astrophys. J. Lett. 597, L5] for CMB temperature anisotropy and extended to CMB polarization in Basak, Hajian and Souradeep [Basak, S., Hajian, A., Souradeep, T. (2006) Phys. Rev. D74, 02130(R)]. The Bipolar Power Spectrum (BiPS) had been measured for the full sky CMB anisotropy maps of the first year WMAP data and now for the recently released three years of WMAP data. We also introduce and measure directional sensitive reduced Bipolar coefficients on the three year WMAP ILC map. Consistent with our published results from first year WMAP data we have no evidence for violation of statistical isotropy on large angular scales. Preliminary analysis of the recently released first WMAP polarization maps, however, indicate significant violation of SI even when the foreground contaminated regions are masked out. Further work is required to confirm a possible cosmic origin and rule out the (more likely) origin in observational artifact such as foreground residuals at high galactic latitude.     

Spatio-temporal trends of rainfall across Indian river basins

Theoretical and Applied Climatology - Daily gridded high-resolution rainfall data of India Meteorological Department at 0.25° spatial resolution (1901–2015) was analyzed to detect the...     

Charged Particle Monitor on the Astrosat Mission

Charged Particle Monitor (CPM) on-board the Astrosat satellite is an instrument designed to detect the flux of charged particles at the satellite location. A Cesium Iodide Thallium (CsI(Tl)) crystal is used with a Kapton window to detect protons with energies greater than 1 MeV. The ground calibration of CPM was done using gamma-rays from radioactive sources and protons from particle accelerators. Based on the ground calibration results, energy deposition above 1 MeV are accepted and particle counts are recorded. It is found that CPM counts are steady and the signal for the onset and exit of South Atlantic Anomaly (SAA) region are generated in a very reliable and stable manner.