Iterative selective spatial variance reduction of MYD11A2 LST data

The aim of this research effort is to develop a method that will allow to map and evaluate thermal anomalies in SW USA from the MYD11A2 night land surface temperature (LST) imagery being available for the year 2014, that present higher spatial (1 km) and temporal (46 images per year) resolution than the MYD11C3 LST data (12 images per year at 5.6 km spatial resolution). The fact that is MYD11A2 LST imagery is projected to a rectangular grid did not affect the X, Y and elevation (H) spatial decorrelation stretch. Principal component analysis and linear regression models isolated and removed the X, Y, H (spatial) dependent variance included in the data while metrics devised verified the selective spatial variance reduction. The reconstructed 46 LST images represent the amount the LST deviates from the X, Y and H predicted for the year 2014. The thematic information content of the reconstructed LST images is verified by cluster analysis and mapped the spatial extend and the temporal variability of thermal anomalies within the study area. The positive thermal anomaly clusters are spatially arranged mainly west of Sierra Nevada in Great Basin Section where extensional tectonics create a series of titled elongated mountain blocks along the N to S direction in between basins bounded by normal faults, while the negative thermal anomaly clusters are spatially arranged along the coastal region, further north and in the western region far from the tilted mountain tectonic blocks of the Great Basin Section. The spatial maps that define regions with (positive or negative) thermal anomalies and distinct mean land response could assist landcover studies and support urban and rural planning in the context of emerging climatic change.     

Detailed seismicity analysis revealing the dynamics of the southern Dead Sea area

Within the framework of the international DESIRE (DEad Sea Integrated REsearch) project, a dense temporary local seismological network was operated in the southern Dead Sea area. During 18 recording months, 648 events were detected. Based on an already published tomography study clustering, focal mechanisms, statistics and the distribution of the microseismicity in relation to the velocity models from the tomography are analysed. The determined b value of 0.74 leads to a relatively high risk of large earthquakes compared to the moderate microseismic activity. The distribution of the seismicity indicates an asymmetric basin with a vertical strike-slip fault forming the eastern boundary of the basin, and an inclined western boundary, made up of strike-slip and normal faults. Furthermore, significant differences between the area north and south of the Bokek fault were observed. South of the Bokek fault, the western boundary is inactive while the entire seismicity occurs on the eastern boundary and below the basin-fill sediments. The largest events occurred here, and their focal mechanisms represent the northwards transform motion of the Arabian plate along the Dead Sea Transform. The vertical extension of the spatial and temporal cluster from February 2007 is interpreted as being related to the locking of the region around the Bokek fault. North of the Bokek fault similar seismic activity occurs on both boundaries most notably within the basin-fill sediments, displaying mainly small events with strike-slip mechanism and normal faulting in EW direction. Therefore, we suggest that the Bokek fault forms the border between the single transform fault and the pull-apart basin with two active border faults.     

On-chip earthquake simulation model using potentials

A two-dimensional (2-D) Cellular Automata (CA) dynamic system constituted of cells-charges has been proposed for the simulation of the earthquake process. The CA model has been calibrated with the use of real data. The calibration incorporates major seismic characteristics of the area under test. The simulation results are found in good quantitative and qualitative agreement with the recorded Gutenberg–Richter (GR) scaling relations. The model is enriched with a powerful multi-parameter interface that enables the user to load real data from different regions. This paper examines the on-chip realisation of the model and its instrumentation. The CA model hardware implementation is based on Field Programmable Gate Array (FPGA) logic. It utilises an array of 32 × 32 cells. Parameters that construct the local CA rule constitute the input data. The initial seed, which to some extent corresponds to the seismic features of the area under test, is loaded in a semi-parallel way and the process is completed in a certain number of time steps. The automatic response of the processor provides the corresponding GR scaling law of the area under study. The hardware implementation of the CA-based earthquake simulation model is advantageous in terms of low-cost, high-speed, compactness and portability features. It can operate as a preliminary data-acquisition filter that accelerates the evaluation of recorded data as far as its origin time, spatial and magnitude completeness and quality are concerned. Software that performs reliable automatic phase picking, as well as data elaboration, can be assembled next to the earthquake recording instruments (the whole network) output to assure a quick and reliable iteration of the focal parameters of a recorded earthquake (epicentre coordinates, focal depth and magnitude). The dedicated processor can be accommodated right after this stage (before any manual elaboration) focusing on the near real-time development of a reliable qualitative dynamical seismic record and a mapping of the seismic characteristics of the area.     

Hydrochemical and isotopic investigation of a sandstone aquifer groundwater in a semi arid region,El Ma El Abiod,Algeria

This work present results of the hydrochemical and isotopic studies on groundwater samples from the study area. Chemical and environmental isotope data are presented and discussed in terms of the origin of dissolved species and of groundwater. All of the investigated groundwater are categorized into two chemical types: low and relatively high mineralized waters type. Interpretation of chemical data, based on both thermodynamic calculations and stability diagrams, suggests that the chemical evolution of groundwater is primarily controlled by water-rock interactions. Interpretation of ¹⁸O and ²H suggests that the recharge of the investigated groundwater may result from differents mechanisms     

The hydrogeochemical characterization of Morsott-El Aouinet aquifer, Northeastern Algeria

A study of the hydrogeochemical processes in the Morsott-El Aouinet aquifer was carried out with the objective of identifying the geochemical processes and their relation with groundwater quality as well as to get an insight into the hydrochemical evaluation of groundwater. The high salinity coupled with groundwater level decline pose serious problems for current irrigation and domestic water supplies as well as future exploitation. A combined hydrogeologic and isotopic investigation have been carried out using chemical and isotopic data to deduce a hydrochemical evaluation of the aquifer system based on the ionic constituents, water types, hydrochemical facies and factors controlling groundwater quality. The ionic speciation and mineral dissolution/precipitation was calculated by WATEQF package software. The increase in salinity is related to the dissolution and/or precipitation processes during the water–rock interaction and to the cationic exchange reactions between groundwater and clay minerals. The isotopic analysis of some groundwater samples shows a similarity with the meteoric waters reflect their short residence time and a lowest evaporation phenomenon of infiltrated groundwater.     

Effect of Soil Parameters on Dynamic Cone Penetration Indices of Laterite Sub-grade Soils from India

The focus of this study was on correlating the effect of grain-size, maximum dry-density (MDD), field moisture content, and the void ratios on penetration measured using the dynamic cone penetrometer (DCP) for laterite soils blended with fines. Tests were performed on soil samples compacted to MDD for moulding water contents set to the optimum moisture content (OMC), dry of OMC, and wet of OMC un-soaked condition. The results indicated that an increase in the fines-content caused a decrease in the MDD, and an increase in the OMC and the DCP penetration. Regressions were developed correlating various parameters.     

Intensified oxygen minimum zone on the western shelf of Bay of Bengal during summer monsoon: influence of river discharge

A study on biogeochemical cycling in the west coastal Bay of Bengal was undertaken during the peak discharge period to understand the influence of enhanced stratification and primary production on the possible intensification of the oxygen minimum zone (OMZ). Our study reveals that oxygen concentrations were below the detection limits in the northwestern (NW) coastal Bay of Bengal between 100 and 500 m associated with strong stratification and high phytoplankton biomass. Such low oxygen concentrations have never been reported so far from the coastal Bay of Bengal. Despite the existence of an environment conducive to denitrification in the coastal Bay of Bengal, accumulation of neither secondary nitrite nor nitrous oxide (N₂O) was observed. The absence of denitrification was reported to be caused by faster scavenging of organic matter and low bacterial respiration rates; in contrast, our results suggest that neither of these factors are potential reasons for the absence of denitrification in the coastal Bay of Bengal.     

Textural studies on red sediments of Bhimunipatnam,Andhra Pradesh,east coast of India

The study presents the textural characteristics of late Quaternary red sediments of Bhimunipatnam to understand the process of formation of these sediments. The red sediments are classified into (a) yellow sediments (b) reddish brown sediments (c) brick red sediments and (d) light yellow sediments sequence in the vertical litho section. The yellow sediments, rests on the khondalite basement, comprises of medium grained, moderate to poorly sorted and positively skewed. The rounded pebble beds with trough cross bedding indicate high energy turbulent conditions of deposition. The fining upward sequences indicate sediments were deposited under decreasing energy conditions under fluvial regime.The iron bearing minerals like garnets and pyriboles have undergone chemical weathering under high oxidizing environment resulting in addition of silt and clay to the reddish brown and brick red sediments and concretions were formed by carbonate precipitation. These processes caused changes in the mean grain size and sorting nature of these sediments which are originally aeolian in origin. The light yellow sediments were medium to fine grained, well sorted and similar to modern dune sands in terms of textural parameters. These sediments were deposited under low oxidation environmental conditions and acquired yellow colour due to Fe hydroxides.     

Analysis and prediction of a catastrophic Indian coastal heat wave of 2015

Heat wave of 2015 over India, a natural disaster with 2500 human deaths, was studied to understand the characteristics, associated atmospheric circulation patterns and to evaluate its predictability. Although temperatures are highest in May over India, occurrence of heat wave conditions over southeast coastal parts of India in May 2015 had been unanticipated. Analyses revealed that isolated region of Andhra Pradesh (AP) had experienced severe heat wave conditions during May 23–27, 2015, with temperatures above 42 °C and the sudden escalation by 7–10 °C within a short span of 2–3 days. Short-range weather predictions with Advanced Research Weather Research and Forecasting model at 3-km resolution, up to 72-h lead time, have been found accurate with statistical metrics of small mean absolute error and root-mean-square error and high index of agreement confirming the predictability of the heat wave evolution. Analyses have indicated that regional atmospheric pressure disparities within the Eurasia region, i.e., increased pressure gradient between the Middle East and India, had been responsible for increased northwest wind flow over to northwest India and to southeast India which have advected higher temperatures. Estimates of warm air advection have shown heat accumulation over AP region, due to sea breeze effect. The study led to the conclusion that changing pressure gradients between Middle East and India, enhancement of northwest wind flow with warm air advection and sea breeze effect along southeast coast blocking the free flow have contributed to the observed heat wave episode over coastal Andhra Pradesh.