Environmental heterogeneity predicts species richness of freshwater mollusks in sub-Saharan Africa

Species diversity and how it is structured on a continental scale is influenced by stochastic, ecological, and evolutionary driving forces, but hypotheses on determining factors have been mainly examined for terrestrial and marine organisms. The extant diversity of African freshwater mollusks is in general well assessed to facilitate conservation strategies and because of the medical importance of several taxa as intermediate hosts for tropical parasites. This historical accumulation of knowledge has, however, not resulted in substantial macroecological studies on the spatial distribution of freshwater mollusks. Here, we use continental distribution data and a recently developed method of random and cohesive allocation of species distribution ranges to test the relative importance of various factors in shaping species richness of Bivalvia and Gastropoda. We show that the mid-domain effect, that is, a hump-shaped richness gradient in a geographically bounded system despite the absence of environmental gradients, plays a minor role in determining species richness of freshwater mollusks in sub-Saharan Africa. The western branch of the East African Rift System was included as dispersal barrier in richness models, but these simulation results did not fit observed diversity patterns significantly better than models where this effect was not included, which suggests that the rift has played a more complex role in generating diversity patterns. Present-day precipitation and temperature explain richness patterns better than Eemian climatic condition. Therefore, the availability of water and energy for primary productivity during the past does not influence current species richness patterns much, and observed diversity patterns appear to be in equilibrium with contemporary climate. The availability of surface waters was the best predictor of bivalve and gastropod richness. Our data indicate that habitat diversity causes the observed species–area relationship, and hence, that environmental heterogeneity is a principal driver of freshwater mollusk richness on a continental scale.     

Rockfall trajectory modeling combined with heuristic analysis for assessing the rockfall hazard along the Maratea SS18 coastal road (Basilicata,Southern Italy)

In this paper, a study aimed to assess the rockfall hazard along a portion of the SS18 coastal road, located in the coastal area of Maratea (Basilicata Region, Southern Italy), is presented. The relevance of this study derives from the location of the study area, because the SS18 is a strategic roads in a touristic area, and, since the hazard assessment was performed in 2004 within a project financed by the Viability Regional Department of Autonomous National Company of Roads (ANAS), from the possibility to validate the results by using real rockfall events occurred after 2004. The procedure for assessing the rockfall hazard was composed of four sequential analyses: (i) geomechanical and kinematic characterization of rock mass, (ii) implementation of Romana’s (1985) Slope Mass Rating (SMR) method for identifying the potential boulder release areas (rockfall initiation areas), (iii) determination of rockfall trajectories by using a 3D numerical model (ROTOMAP), (iv) calculation and mapping of the hazard index by combining three factors, i.e., (a) lithological features of outcropping materials on rock faces, (b) kinematic compatibility defined by simulating the rockfall trajectories, and (c) spatial distribution of occurred rockfall events. Finally, the proposed methodology was validated by combining the distribution of the hazard levels along the road with the location on the SS18 of the rockfall events occurred from 2004 to 2014.     

Improving runoff prediction using agronomical information in a cropped,loess covered catchment

Predicting runoff hot spots and hot‐moments within a headwater crop‐catchment is of the utmost importance to reduce adverse effects on aquatic ecosystems by adapting land use management to control runoff. Reliable predictions of runoff patterns during a crop growing season remain challenging. This is mainly due to the large spatial and temporal variations of topsoil hydraulic properties controlled by complex interactions between weather, growing vegetation, and cropping operations. This interaction can significantly modify runoff patterns and few process‐based models can integrate this evolution of topsoil properties during a crop growing season at the catchment scale. Therefore, the purpose of this study was to better constrain the event‐based hydrological model Limburg Soil Erosion Model by incorporating temporal constraints for input topsoil properties during a crop growing season (LISEM). The results of the temporal constraint strategy (TCS) were compared with a classical event per event calibration strategy (EES) using multi‐scale runoff information (from plot to catchment). The EES and TCS approaches were applied in a loess catchment of 47 ha located 30 km northeast of Strasbourg (Alsace, France). A slight decrease of the Nash–Sutcliffe efficiency criterion on runoff discharge for TCS compared to EES was counterbalanced by a clear improvement of the spatial runoff patterns within the catchment. This study showed that limited agronomical and climatic information added during the calibration step improved the spatial runoff predictions of an event‐based model. Reliable prediction of runoff source, connectivity, and dynamics can then be derived and discussed with stakeholders to identify runoff hot spots and hot‐moments for subsequent land use and crop management modifications.     

Quantification of uncertainty in design water levels due to uncertain bed form roughness in the Dutch river Waal

Hydrodynamic river models are applied to design and evaluate measures for purposes such as safety against flooding. The modelling of river processes involves numerous uncertainties, resulting in uncertain model results. Knowledge of the type and magnitude of these uncertainties is crucial for a meaningful interpretation of the model results. Uncertainty in the hydraulic roughness due to bed forms is one of the main contributors to the uncertainty in the modelled water levels. The aim of this study was to quantify the uncertainty in the bed form roughness under design conditions and quantify the effect on the design water levels in the Dutch river Waal. Five roughness models that predict bed form roughness based on measured bed form and flow characteristics were extrapolated to design conditions. The results show that the 95% confidence interval of the predicted Nikuradse roughness values under design conditions ranges from 0.32 to 1.03 m. This uncertainty was propagated through the two‐dimensional hydrodynamic model, WAQUA, by means of a Monte Carlo simulation for an idealized schematization of the Dutch river Waal. The uncertain bed form roughness results in an uncertainty in the design water levels, with a 95% confidence interval of 0.53 m, which is significant for Dutch river management practice. The uncertainty in the bed form roughness was mainly caused by a lack of knowledge about the physical process of bed form evolution that causes roughness. An improved estimation of bed form roughness can significantly reduce the uncertainty in the design water levels. Copyright © 2012 John Wiley & Sons, Ltd.     

Precambrian history of the Zona Transversal of the Borborema Province,NE Brazil: Insights from Sm–Nd and U–Pb geochronology

The Borborema Province has three major subprovinces. The northern subprovince lies north of the Patos shear zone and is comprised of Paleoproterozoic cratonic basement with Archean nuclei, plus overlying Neoproterozoic supracrustal rocks and Brasiliano plutonic rocks. The central subprovince occurs between the Patos and Pernambuco shear zones and is mainly comprised of the Zona Transversal. The southern subprovince occurs between the Pernamabuco shear zone and the São Francisco craton and is comprised of a tectonic collage of various blocks, terranes, or domains ranging in age from Archean to Neoproterozoic. This report focuses on the Zona Transversal, especially on Brasiliano rocks for which we have the most new information.Paleoproterozoic gneisses with ages of 2.0–2.2 Ga occur discontinuously throughout the Zona Transversal. The Cariris Velhos suite consists of metavolcanic, metasedimentary, and metaplutonic rocks yielding U–Pb zircon ages of 995–960 Ma. This suite is mainly confined to a 100 km wide belt that extends for more than 700 km within the Alto Pajeú terrane. Sm–Nd model ages in metaigneous rocks cluster about 1.3–1.6 Ga, indicating that older crust was involved in genesis of their magmas. Brasiliano supracrustal rocks dominate the Piancó-Alto Brígida terrane, and they probably also constitute significant parts of the Alto Pajeú and Rio Capibaribe terranes. They are only slightly older than early stages of Brasiliano plutonism, with detrital zircon ages at least as young as 620 Ma; most T_DM ages range from 1.2 to 1.6 Ga.Brasiliano plutons range from ca. 640 to 540 Ma, and their T_DM ages range from 1.2 to 2.5 Ga. Previous workers have shown significant correlations among U–Pb ages, Sm–Nd model ages, petrology, and geochemistry, and we are able to reinforce and extend these correlations. Stage I plutons formed 640–610 Ma and have T_DM ages less than 1.5 Ga. Stage II (610–590 Ma) contains few plutons, but coincides with the peak of compressional deformation, metamorphism, and formation of migmatites. Stage III plutons (590 to ca. 575 Ma) have older T_DM ages (ca. 1.8–2.0 Ga), as do Stage IV plutons (575 to ca. 550 Ma; T_DM from 1.9 to 2.4 Ga). Stage III plutons formed during the transition from compressional to transcurrent deformation, while Stage IV plutons are mainly post-tectonic. Stage V plutons (550–530 Ma) are commonly undeformed (except along younger shear zones) and have A-type geochemistry. The five stages have distinct geochemical properties, which suggest that the tectonic settings evolved from early, arc-related magma-genesis (Stage I) to within-plate magma-genesis (Stage V), with perhaps some intermediate phases of extensional environments.     

Constraints on the late Quaternary glaciations in Tibet from cosmogenic exposure ages of moraine surfaces

This contribution provides new constraints on the timing of Tibetan glacial recessions recorded by the abandonment of moraines. We present cosmogenic radionuclide ¹⁰Be inventories at 17 sites in southern and western Tibet (32 crests, 249 samples) and infer the range of permissible emplacement ages based on these analyses. Individual large embedded rock and boulder samples were collected from the crests of moraine surfaces and analyzed for ¹⁰Be abundance. We consider two scenarios to interpret the age of glacial recession leading to the moraine surface formation from these sample exposure ages: 1) Erosion of the moraine surface is insignificant and so the emplacement age of the moraines is reflected by the mean sample age; and 2) Erosion progressively exposes large boulders with little prior exposure, and so the oldest sample age records the minimum moraine emplacement age. We found that depending on the scenario chosen, the moraine emplacement age can vary by > 50% for ～100 ka-old samples. We consider two scaling models for estimating the production rates of ¹⁰Be in Tibet, which has an important, although lesser, effect on inferred moraine ages. While the data presented herein effectively increase the database of sample exposure ages from Tibet by ～20%, we find that uncertainties related to the interpretation of the ¹⁰Be abundance within individual samples in terms of moraine emplacement ages are sufficient to accommodate either a view in which glacial advances are associated with temperature minima or precipitation maxima that are recorded by independent paleoclimate proxies. A reanalysis of published data from moraines throughout Tibet shows that the variation we observe is not unique to our dataset but rather is a robust feature of the Tibetan moraine age database. Thus, when viewed in a similar way with other samples collected from this area, uncertainties within moraine exposure ages obscure attribution of Tibetan glacial advances to temperature minima or precipitation maxima. Our work suggests that more reliable chronologies of Tibetan glaciations will come from improvements in production rate models for this portion of the world, as well as a better understanding of the processes that form and modify these geomorphic surfaces.     

Evolution of forest precipitation water storage measurement methods

Precipitation intercepted by forests plays a major role in more than one‐fourth of the global land area's hydrologic cycle. Direct in situ measurement of intercepted precipitation is challenging, and thus, it is typically indirectly estimated through comparing precipitation under forest cover and in the open. We discuss/compare measurement methods for forest precipitation interception beyond classical budgeting and then recommend future directions for improving water storage estimation. Comparison of techniques shows that methods submerging tree components produce the largest water storage capacity values. Whole‐tree lysimeters have been used with great success at quantifying water storage for the integrated system yet are unable to separate trunk versus canopy storage. Remote sensing, particularly signal attenuation, may permit this separation. Mechanical displacement methods show great promise and variety of techniques: pulley/spring system, branch strain sensors, trunk compression sensors and photography. Relating wind sway to water storage also shows great promise with negligible environmental disruption yet is currently at the proof‐of‐concept stage. Suggested future directions focus on development of common features regarding all discussed methods: (i) measurement uncertainties or processes beyond interception influencing the observed signal, (ii) scaling approaches to move from single tree components to the single‐tree and forest scales and (iii) temporal scaling to estimate the relevance of single‐interception components over longer timescales. Through addressing these research needs, we hope the scientific community can develop an ‘integrated’ monitoring plan incorporating multiple measurement techniques to characterize forest‐scale water storage dynamics while simultaneously investigating underlying (smaller‐scale) components driving those dynamics across the spectrum of precipitation and forest conditions. Copyright © 2014 John Wiley & Sons, Ltd.     

High‐grade localized metasomatic alteration of the granitic gneiss surrounding a clinopyroxene‐rich pegmatoid dyke: Söndrum stenhuggeriet,Halmstad, SW Sweden

The Söndrum stone quarry (Halmstad, SW Sweden) exposes a transition from migmatized granitic gneissic country rock into a foliated clinopyroxene‐free granitic gneiss, and then a central pegmatoid dyke dominated by clinopyroxene megacrysts. This transition zone represents a fracture‐controlled, fluid‐alteration zone that developed under conditions of 650–700 °C and 790 MPa. Mineral chemical trends in F, Cl, Fe, Ti, Mn and Y are interpreted as documenting a fluid infiltration event associated with the formation of the pegmatoid dyke. Fluid inclusions from the pegmatoid dyke are CO₂ dominant, whereas in the surrounding country rock they are dominated by H₂O‐NaCl‐CaCl₂. Fluid inclusions from the intermediate foliated clinopyroxene‐free granitic gneiss are a mixture of the two types. The pegmatoid dyke appears to have originated from a high Ca activity, Fe‐Mg enriched, fluid‐rich granitic melt with a CO₂ component, which was emplaced along a tectonic fracture in a regionally migmatized granitic gneiss in the lower crust. This was accompanied by limited partial melting of the surrounding granitic gneiss. The Ca activity of the melt was high enough to allow for the formation of clinopyroxene megacrysts as opposed to orthopyroxene. H₂O‐enriched fluids expelled from the crystallizing pegmatoid dyke, which retained the majority of the CO₂ helping to stabilize the clinopyroxene. The expelled fluids coarsened and chemically affected the surrounding country rock resulting in trends in the mineral and fluid inclusion chemistry seen today in the foliated and regional granitic gneiss.