Lateral variability of flow over a sill in a channel of southern Chile

Measurements of velocity and density profiles were used to describe the tidal and mean flow structure across and along a sill in Refugio Channel, a fjord-like inlet in Southern Chile (43.9°S). These are the first oceanographic measurements of any kind effected in Refugio Channel. Current profiles were obtained with a 307.2-kHz acoustic Doppler current profiler during two semidiurnal cycles along a repeated triangular circuit. Two along-channel transects formed the sides of the triangle that crossed the sill and were identified as the western and eastern transects. One cross-channel transect, the base of the triangle, was located on the seaward side of the sill. Density profiles were obtained at the corners of the triangle. The longitudinal mean flow in the western transect showed a two-layer exchange structure over the landward side of the sill. The structure of net seaward flow at the surface and landward flow at depth was disrupted by the sill in such a way that over the seaward side of the sill, only seaward flow was observed throughout the water column. This likely resulted from the blocking of landward net flow by the sill. In the eastern transect, two-layer exchange dominated over most of the transect and was consistent with the observed density profiles. Over the seaward side of the sill, a surface layer, ∼10m deep, flowed landward as a third layer. This feature should have been caused by river input further seaward (to the north) and produced a surface convergence region over the sill. In terms of tidal flows, the greatest tidal current amplitudes were 40cm s⁻¹ over the sill as the flow accelerated through the reduced cross-sectional area of the channel. Near-surface flow convergences were identified over both along-channel transects.     

Correction to: A novel methodological approach for land subsidence prediction through data assimilation techniques

Computational Geosciences - A Correction to this paper has been published: https://doi.org/10.1007/s10596-021-10079-6     

Continuous assessment of landslides by measuring their basal temperature

Landslides - In this study, we suggest a temperature-based assessment and mitigation approach for deep-seated landslides that allows to forecast the behavior of the slide and assess its stability....     

A large epeiric methanogenic Bambuí sea in the core of Gondwana supercontinent?

Carbon isotope compositions of both sedimentary carbonate and organic matter can be used as key proxies of the global carbon cycle and of its evolution through time,as long as they are acquired from waters where the dissolved inorganic carbon(DIC)is in isotope equilibrium with the atmospheric CO2.However,in shallow water platforms and epeiric settings,the influence of local to regional parameters on carbon cycling may lead to DIG isotope variations unrelated to the global carbon cycle.This may be especially true for the terminal Neoproterozoic,when Gondwana assembly isolated waters masses from the global ocean,and extreme positive and negative carbon isotope excursions are recorded,potentially decoupled from global signals.To improve our understanding on the type of information recorded by these excursions,we investigate the pairedδ^13Ccarb andδ^13Corg evolution for an increasingly restricted late Ediacaran-Cambrian foreland system in the West Gondwana interior:the basal Bambui Group.This succession represents a 1~(st)-order sedimentary sequence and records two majorδ^13Ccarb excursions in its two lowermost lower-rank sequences.The basal cap carbonate interval at the base of the first sequence,deposited when the basin was connected to the ocean,hosts antithetical negative and positive excursions forδ^13Ccarb andδ^13Corg,respectively,resulting inΔ^13C values lower than 25‰.From the top of the basal sequence upwards,an extremely positiveδ^13Ccarb excursion is coupled toδ^13Corg,reaching values of+14‰and-14‰,respectively.This positive excursion represents a remarkable basin-wide carbon isotope feature of the Bambui Group that occurs with only minor changes inΔ^13C values,suggesting change in the DIC isotope composition.We argue that this regional isotopic excursion is related to a disconnection between the intrabasinal and the global carbon cycles.This extreme carbon isotope excursion may have been a product of a disequilibria between the basin DIC and atmospheric CO2 induced by an active methanogenesis,favored by the basin restriction.The drawdown of sulfate reservoir by microbial sulfate reduction in a poorly ventilated and dominantly anoxic basin would have triggered methanogenesis and ultimately methane escape to the atmosphere,resulting in a^13C-enriched DIC influenced by methanogenic CO2.Isolated basins in the interior of the Gondwana supercontinent may have represented a significant source of methane inputs to the atmosphere,potentially affecting both the global carbon cycle and the climate.     

Quantifying the impact of chemicals on stable carbon and oxygen isotope values of raw pollen

Purification protocols to extract pollen from lake sediments contain chemicals that alter the carbon and oxygen pollen-isotope values according to pollen characteristics and family affiliation. Modern (raw) pollen of broad-leaved (Alnus glutinosa, Betula pendula, Carpinus betulus, Corylus avellana, Fagus sylvatica and Quercus robur) and coniferous tree species (Picea abies and Pinus sylvestris) were treated with potassium hydroxide (KOH), hydrofluoric acid (HF), sodium hypochlorite (NaClO) and sulphuric acid (H₂SO₄) to test the impact on δ¹³C_pollen and δ¹⁸O_pollen and assess the applicability in purification protocols. Pollen of broad-leaved and coniferous trees reacted differently to chemical exposure, but response patterns are generally alike. Alterations of δ¹³C_pollen values vary between + 1.0‰ (B. pendula, NaClO-treatment) and −5.0‰ (P. sylvestris, H₂SO₄-treatment). The δ¹³C_pollen values of raw and chemically treated samples seem to be related after treatments with KOH, NaClO and HF, whereas the application of H₂SO₄ led to inconsistent changes among species. The impact of chemicals on δ¹⁸O_pollen are more diverse and offsets range between +1.1‰ (C. avellana, NaClO-treatment) and −17.9‰ (P. sylvestris, H₂SO₄-treatment). In general, the use of isotope-altering chemicals in purification protocols should be brought to a minimum, but the application of KOH and NaClO seems mostly unproblematic before δ¹³C_pollen and δ¹⁸O_pollen analysis.     

Collins Glacier Retreat Process and Regional Climatic Variations,King George Island,Antarctica

This paper investigates the recent climatic variability and changes in snow line and ice front position in Collins Glacier, King George Island, South Shetland Islands, Antarctic Peninsula. This region has recorded one of the largest temperature increases in the past fifty years and has been demonstrated to be highly sensitive to climate changes. To monitor recent changes (1983–2006), we determined the fluctuations of the terminus and snow line of the glacier via remote sensing data and field observation in the summer of 2013. We conclude that the Collins Glacier has responded slowly to regional climate changes (decades or even centuries), as glacial responses to climatic events do not depend solely on one environmental variable. The glacier presented more retreat and elevation of the snow line in the north sector. The retreat data are correlated with the mean monthly temperature and annual number of days of melting‐degree variations.     

Verification of landslide susceptibility mapping: a case study

A methodology is proposed for mapping susceptibility to landsliding and validating the results. Heavy rains in late 1996 and early 1997 led to a large number of landslids in the Rute sector (Córdoba, Southern Spain), where landslide susceptibility mapping had previously been carried out using a ‘matrix’ method developed with a Geographical Information System (GIS). Analysis of the distribution of the new landslides (or reactivated earlier ones) enabled the methodology to be validated by calculating association coefficients and determining the closeness of the match between subsequent field evidence and the previously defined susceptibility levels. From the data obtained, it can be concluded that the susceptibility mapping effectively explained the spatial distribution of landslides, thus providing valuable information on stability conditions over a widespread area. Copyright © 1999 John Wiley & Sons, Ltd.     

Accurate automated assessment of gully cross‐section geometry using the photogrammetric interface FreeXSapp

During recent years, 3‐D techniques such as LiDAR and Structure‐from‐Motion (SfM) photogrammetry have been increasingly used for gully erosion assessment. However, innovative image‐based approaches based on these advances may also be used to provide accurate cross‐sectional measurements which are less expensive and time‐demanding. In this work, we present the FreeXSapp methodology, a new piece of freely‐available software based on existing SfM tools (MicMac and PMVS2) and augmented‐reality targets (ArUco markers) which performs the automated 3‐D reconstruction, scaling, orientation and analysis of gully cross‐sections (XSs) from images taken from the gully margin using a smartphone camera. As a field application, the volume of a 60‐m‐long medium‐size gully was evaluated, where a total of 10 XSs were measured and analyzed in approximately 30 min. The relative accuracy in estimating width and depth dimensions was in the order of 0.5%, with a precision ratio (relative to the camera–XS distance) of ~1500. Overall, using this methodology showed excellent performance in terms of time and cost requirements when compared with typical 3‐D and conventional 2‐D techniques. The FreeXSapp interface is downloadable for free for Windows operating systems at http://www.uco.es/users/ccastillo/freexsapp. Copyright © 2018 John Wiley & Sons, Ltd.     

Experimental verification of effective anisotropic crack theories in variable crack aspect ratio medium

Physical modelling of cracked/fractured media using downscaled laboratory experiments has been used with great success as a useful alternative for understanding the effect of anisotropy in the hydrocarbon reservoir characterization and in the crustal and mantle seismology. The main goal of this work was to experimentally verify the predictions of effective elastic parameters in anisotropic cracked media by Hudson and Eshelby–Cheng's effective medium models. For this purpose, we carried out ultrasonic measurements on synthetic anisotropic samples with low crack densities and different aspect ratios. Twelve samples were prepared with two different crack densities, 5% and 8%. Three samples for each crack density presented cracks with only one crack aspect ratio, whereas other three samples for each crack density presented cracks with three different aspect ratios in their composition. It results in samples with aspect ratio values varying from 0.13 to 0.26. All the cracked samples were simulated by penny‐shaped rubber inclusions in a homogeneous isotropic matrix made with epoxy resin. Moreover, an isotropic sample for reference was constructed with epoxy resin only. Regarding velocity predictions performed by the theoretical models, Eshelby–Cheng shows a better fit when compared with the experimental results for samples with single and mix crack aspect ratio (for both crack densities). From velocity values, our comparisons were also performed in terms of the ε, γ, and δ parameters (Thomsen parameters). The results show that Eshelby–Cheng effective medium model fits better with the measurements of ε and γ parameters for crack samples with only one type of crack aspect ratio.