Analysis of the rainfall pattern triggering the Lemešná debris flow,Javorníky Range,the Czech Republic

Natural Hazards - Two significant rainfall episodes affected the eastern part of the Czech Republic in May 2010 causing dozens of landslides, including a potentially damaging debris flow on...     

The influence of tidal action on porewater nitrate concentration and dynamics in intertidal sediments of the Sado estuary

The change in porewater nitrate (NO₂ ^? + NO₃ ^?) concentrations during exposure of intertidal sediment was studied at a fixed location in the Sado estuary, southwest Portugal, in November 1994. In order to follow nitrate concentration and dynamics from pre-ebb to post flood, during the day, high vertical resolution profiles (0.2 cm) were studied. As a complement, in February 1995, potential nitrification rates in the sediment were measured by laboratory incubations, with high vertical resolution (0.2 cm) up to 3 cm depth. Oxygen penetration was measured with polarographic mini-electrodes. The sediment’s texture as well as the organic matter composition in carbon and nitrogen were studied in deeper (30 cm) cores. In February 1993,²¹⁰Pb activity depth profiles were measured in a core sampled at the beginning of exposure, in order to evaluate the possibility of nonlocal particle exchange. C:N ratios and²¹⁰Pb activity profiles show evidence of nonlocal exchange of solid phase particles between the surface and deeper sediment, most likely due to macrofaunal activity. As a consequence, fresh organic matter is brought from the surface to 7–9 cm depth, causing enhancement of nutrient concentrations. Results of this study suggest nitrate dynamics in intertidal sediments of the Sado estuary are strongly influenced by tidal action. Periodic submersion and exposure allow for the diversification of pathways of oxygen supply to the sediment. Tidal stress at the sediment-water interface during the arrival (flooding) and departure (exposure) of the tidal front at the site has an important bearing on the effective depth of the nitrification zone. A denitrification rate of 2.16 μmol N dm^?5 h^?1 was measured directly from the nitrate inventory in the 1.5–6 cm depth layer. The schematic model of N cycling in these sediments suggests that 20% of the N pool is denitrified during exposure, and that this process is limited by O₂ availability for nitrification.     

Partition of trace elements in co-existing biotite,muscovite and potassium feldspar of granitic rocks,northern Portugal

Chemical analyses are given for Na, K, and trace elements of muscovite and potassium feldspar of granitic rocks. The distribution of trace elements in co-existing minerals suggests that equilibrium was attained and that muscovite is a primary mineral. These observations and the comparison of the trace-element chemistry of megacrysts and groundmass potassium feldspars of porphyritic rock types lead to the conclusion that the megacrysts are in face phenocrysts which crystallized in equilibrium with the other minerals of the rock.The ranges of values of the distribution coefficients K_D(Rb/K) and K_D(Cs/K) in mineral pairs confirm other observations on the equilibrium among various minerals. However, application of experimental data on the temperature effect on K_D leads to results conflicting with the petrologic observations. The possible influence of other factors on K_D is analyzed and among these factors the composition of the feldspar and the solidus-liquidus temperature interval may play a dominant role.     

Geology and geochemistry of the Águas Claras and Pico Iron Mines, Quadrilátero Ferrífero, Minas Gerais, Brazil

The Águas Claras and Pico Mines are two world-class iron-ore mines hosted within the Lower- Proterozoic banded iron-formations (locally known as itabirites) of the Minas Supergroup located in the Quadrilátero Ferrífero district, Minas Gerais, Brazil. The Águas Claras orebody consists of a 2,500-m-long roughly tabular-shaped lens hosted within the dolomitic itabirite of the Cauê Formation. Dolomitic itabirite is the protore of the soft high-grade iron ore, which is the main ore type of the Águas Claras orebody, representing about 85% of the 284 Mt mined since 1973, with the remaining 15% comprising hard high-grade ore. Hematite is the main constituent of the iron ores. It occurs as martite, granular hematite and locally as specularite. Magnetite appears subordinately as relicts within martite and hematite crystals. Gangue minerals are very rare. These consist of dolomite, chlorite, talc, and apatite, and are especially common in contact with the protore. This virtual absence of gangue minerals is reflected in the chemistry of ores that are characterized by very high Fe contents (an average of 68.2% Fe).The Pico orebody is a continuous ~3,000-m-long body of a lenticular shape hosted within siliceous itabirite, which is the protore of the soft high- and low-grade ores at the Pico Mine. The soft high-grade ores, together with the low-grade ores, called iron-rich itabirite, are the main types of ore, and respectively represent approximately 51 and 29% of the reserves. The remaining 20% consists of hard high-grade ore. The iron oxide mineralogy is the same as that of the Águas Claras Mine, but in different proportions. Gangue minerals are very rare in the high-grade ores, but are slightly more common in the iron-rich itabirite. Quartz is the dominant gangue mineral, and is found with minor quantities of chlorite. The chemistry of the high-grade ores is characterized by high Fe contents (an average of 67.0%) and low P, Al₂O₃, and SiO₂, which are concentrated in the fines. Iron-rich itabirites average 58.6% Fe and 13.5% SiO₂.The genesis of the soft high-grade ores and iron-rich itabirites is related to supergene processes. Leaching of the gangue minerals by groundwater promoted the residual iron enrichment of the itabirites. This process was favored by the tropical climate and topographic situation. The original composition of the itabirites and the presence of structures controlling the circulation of the groundwater have influenced the degree of iron enrichment. The hard high-grade ores are of a hypogene origin. Their genesis is attributed to hydrothermal solutions that leached the gangue minerals and filled the spaces with hematite. This process remains a source of debate and is not yet fully understood.Editorial handling: S.G. Hagemann     

Platinum-group elements, S, Se and Cu in highly depleted abyssal peridotites from the Mid-Atlantic Ocean Ridge (ODP Hole 1274A): Influence of hydrothermal and magmatic processes

Highly depleted harzburgites and dunites were recovered from ODP Hole 1274A, near the intersection between the Mid-Atlantic Ocean Ridge and the 15°20′N Fracture Zone. In addition to high degrees of partial melting, these peridotites underwent multiple episodes of melt–rock reaction and intense serpentinization and seawater alteration close to the seafloor. Low concentrations of Se, Cu and platinum-group elements (PGE) in harzburgites drilled at around 35–85 m below seafloor are consistent with the consumption of mantle sulfides after high degrees (>15–20 %) of partial melting and redistribution of chalcophile and siderophile elements into PGE-rich residual microphases. Higher concentrations of Cu, Se, Ru, Rh and Pd in harzburgites from the uppermost and lowest cores testify to late reaction with a sulfide melt. Dunites were formed by percolation of silica- and sulfur-undersaturated melts into low-Se harzburgites. Platinum-group and chalcophile elements were not mobilized during dunite formation and mostly preserve the signature of precursor harzburgites, except for higher Ru and lower Pt contents caused by precipitation and removal of platinum-group minerals. During serpentinization at low temperature (<250 °C) and reducing conditions, mantle sulfides experienced desulfurization to S-poor sulfides (mainly heazlewoodite) and awaruite. Contrary to Se and Cu, sulfur does not record the magmatic evolution of peridotites but was mostly added in hydrothermal sulfides and sulfate from seawater. Platinum-group elements were unaffected by post-magmatic low-temperature processes, except Pt and Pd that may have been slightly remobilized during oxidative seawater alteration.     

Simple monitoring method for precaution of landslides watching tilting and water contents on slopes surface

A low-cost and simple monitoring method for early warning of landslides is proposed. To detect abnormal deformation of a slope, this method employs a tilt sensor in place of an extensometer on the slope surface. In order to examine the relevance of measuring rotation angle on a slope surface by tilt sensor, model tests were conducted, and rotation on the slope surface was observed together with slide displacement along the surface. The rotation data responded 30 min before failure in a model test, which could be useful as a signal for early warning. However, the behavior of rotation before failure varies from case to case, and thus, criteria to issue warning should be defined more carefully. For a model slope made of uniform loose sand, measurement of slide displacement along the slope surface is sensitive to failure at the toe, while the measurement of rotation on the slope surface is useful to detect the development of progressive failure upward along the slope. Wireless sensor units with microelectromechanical systems (MEMS) tilt sensor and volumetric water content sensor were also examined on a real slope in Kobe City, and a long-term monitoring was attempted. A simple but possible way to define the criteria of judgment to issue warning can be proposed based on combination of data obtained by the tilt sensors and volumetric water content sensors.     

Landslide detection in the Himalayas using machine learning algorithms and U-Net

Landslides - Event-based landslide inventories are essential sources to broaden our understanding of the causal relationship between triggering events and the occurring landslides. Moreover,...     

Mountain Front Development by Folding and Crustal Thickening in the Internal Zone of the Betic Cordillera-Alboran Sea Boundary

The boundary between the Alboran Sea and Betic Cordillera is a good example of a fold related mountain front in the Internal Zone of an alpine mountain range. Since the late Miocene, NNW-SSE convergence between the Eurasian and African plates has produced shortening and related orthogonal extension. To improve the characterisation of the geometry of the deep structure in the region and to establish the recent tectonic evolution of the mountain front, well logs and newly acquired geophysical data (multichannel reflection seismic and gravimetric surveys) have been interpreted and integrated with available surface data. The most marked tectonic structure corresponds to large antiforms and synforms of ENE-WSW trend which are related to mountain ranges and basins, respectively. The fold belt continues toward the northern continental shelf of the Alboran Sea. The fold vergence is generally northwards and its amplitude decreases progressively towards SSE, until disappearring in a sharp boundary where the reflectors are undeformed. The deep geometry suggests that fold growth started during upper Tortonian times and continued its activity up to Pliocene or even Quaternary times. The NNW-SSE compression produces crustal thickening and a regional and progressive southwards emersion. The location of main present-day deformation fronts in the Internal Zones contrasts with classical models where the deformation progresses towards the frontal part of External Zones of cordilleras. In addition, this fold-related deformation mountain front has features different from fault related fronts, as it does not show a sharp boundary, and folds that determine rectilinear mountain boundaries decrease progressively in amplitude or in wavelength up to undeformed areas.