Kamafugitic diatremes: their textures and field relationships with examples from the Goiás alkaline province, Brazil

Kamafugitic rocks intruded the Precambrian basement and Phanerozoic sediments at the northeast border of the Paraná basin as part of the Late Cretaceous Goiás alkaline province (GAP). Plutonic complexes dominate the north of the province, whereas lavas and pyroclastic rocks prevail in the south. The central GAP is characterized by kamafugitic diatremes, which may crop out continuously for up to 850 m and consist of a central breccia body, surrounded and overlain by lava flows and crosscut by dykes. The breccias contain some special spheroidal juvenile fragments—namely, accretionary and armored lapilli, frozen droplets, spinning droplets, and wrapped fragments—whose textural and mineralogical aspects are described in detail. Irregularly shaped tuff pockets that occur within the breccias contain textures and structures similar to those of subaerial surge deposits and formed in confined, high gas to solid+liquid ratio domains in the conduit. Diatreme emplacement affected the country rock through thermal metamorphism, development of columnar jointing, and formation of peperite-like mixtures. There is no evidence of phreatomagmatic activity in the diatremes, and CO₂, rather than H₂O, seems to have been the major volatile component of the kamafugitic magmas. This finding implies that features such as accretionary lapilli and peperites are not exclusively associated with H₂O-dominated processes.     

System Reliability Analysis of an Offshore Jacket Platform

This study investigates strategies for solving the system reliability of large three-dimensional jacket structures.These structural systems normally fail as a result of a series of different components failures.The failure characteristics are investigated under various environmental conditions and direction combinations.Theβ-unzipping technique is adopted to determine critical failure components,and the entire system is simplified as a series-parallel system to approximately evaluate the structural system reliability.However,this approach needs excessive computational effort for searching failure components and failure paths.Based on a trained artificial neural network(ANN),which can be used to approximate the implicit limit-state function of a complicated structure,a new alternative procedure is proposed to improve the efficiency of the system reliability analysis method.The failure probability is calculated through Monte Carlo simulation(MCS)with Latin hypercube sampling(LHS).The features and applicability of the above procedure are discussed and compared using an example jacket platform located in Chengdao Oilfield,Bohai Sea,China.This study provides a reference for the evaluation of the system reliability of jacket structures.     

An Early-Cambrian UPb apatite cooling age for the high-temperature regional metamorphism in the Piancó area,Borborema Province (NE Brazil): initial conclusions

The Borborema Province (BP) of northeastern Brazil is a complex crustal assemblage, which has undergone a polycyclic evolution during the Proterozoic. In the Piancó-Alto Br??gida belt, a metamorphosed leucosome vein inserted in amphibolites has a trace element pattern suggesting a T-MORB protolith. Apatites yield a REE pattern indicating growth in equilibrium with garnet, thus pointing to its metamorphic origin. UPb analyses yield an age of 540±5 Ma interpreted as a cooling age following amphibolite facies regional metamorphism associated with granitic emplacement at ca. 580 Ma. The resulting slow cooling rates (ranging from ca. 2.5 to 5 °C Ma^?1) are consistent with underplating of mafic magmas, or crustal thickening caused by nappe stacking, as possible processes governing the metamorphic evolution of the BP. To cite this article: B. Dhuime et al., C. R. Geoscience 335 (2003).     

Life after death: shallow‐water Mediterranean invertebrate communities associated with mammal bones

Invertebrate and microbial marine communities associated with mammal bones are interesting and poorly understood habitats, mainly known from studies on deep‐water whale remains. In order to characterize these communities in the shallow‐water Mediterranean, we present here the results of a pioneering experiment using mammal bones. Minke whale, pig and cow bones were experimentally deployed on three different background communities: rocky substrate, soft‐bottom and a Posidonia oceanica meadow. Bones were deployed for a year at about 20 m depth and collected every 3 months, and the invertebrate fauna colonizing the bones was identified to the lowest possible taxonomic level. As expected, mammal bones showed remarkable differences when compared with background communities. Within bones, four different clusters could be identified, primarily on the basis of the polychaete fauna, the most abundant and diverse group in the survey. Clusters A1–A3 corresponded to high to moderately altered successional stages composed by a fauna closer to that of anthropogenically enriched shallow‐water environments. These clusters were characterized by the occurrence of the opportunist polychaetes Ophryotrocha puerilis, Neanthes caudata (Cluster A1), Protodorvillea kefersteini (Cluster A2) and Ophryotrocha alborana (Cluster A3). Cluster B was characterized by the presence of the polychaete Oxydromus pallidus together with typical invertebrate background fauna, which suggests that this community, after a year of deployment, was closer to that found in natural conditions. As opposed to similar shallow‐water studies in other geographic areas, no occurrence of the polychaete Osedax (commonly known as bone‐eating worms) was reported from our experiments. Apart from the study on the invertebrate communities, insights about the population dynamics of three of the most abundant species (O. puerilis, O. alborana, N. caudata) are given as well as remarks on a hypothetical trophic network based on fecal pellet analysis.     

The passivation of calcite by acid mine water. Column experiments with ferric sulfate and ferric chloride solutions at pH 2

Column experiments, simulating the behavior of passive treatment systems for acid mine drainage, have been performed. Acid solutions (HCl or H₂SO₄, pH 2), with initial concentrations of Fe(III) ranging from 250 to 1500 mg L⁻¹, were injected into column reactors packed with calcite grains at a constant flow rate. The composition of the solutions was monitored during the experiments. At the end of the experiments (passivation of the columns), the composition and structure of the solids were measured. The dissolution of calcite in the columns caused an increase in pH and the release of Ca into the solution, leading to the precipitation of gypsum and Fe–oxyhydroxysulfates (Fe(III)–SO₄–H⁺ solutions) or Fe–oxyhydroxychlorides (Fe(III)–Cl–H⁺ solutions). The columns worked as an efficient barrier for some time, increasing the pH of the circulating solutions from 2 to 6–7 and removing its metal content. However, after some time (several weeks, depending on the conditions), the columns became chemically inert. The results showed that passivation time increased with decreasing anion and metal content of the solutions. Gypsum was the phase responsible for the passivation of calcite in the experiments with Fe(III)–SO₄–H⁺ solutions. Schwertmannite and goethite appeared as the Fe(III) secondary phases in those experiments. Akaganeite was the phase responsible for the passivation of the system in the experiments with Fe(III)–Cl–H⁺ solutions.     

Short-Term Benthic Recolonization after Dredging in the Harbour of Ceuta, North Africa

Abstract. The benthic recovery after dredging (area: 2625 m²) was studied in a polluted and enclosed area of the harbour of Ceuta, in which the recolonization through the water column (larvae and adult bedload transport) could be limited by the lack of renewal. The benthos was sampled at two sites (control and dredged) using a van Veen grab and adopting a BACI (Before, After, Control, Impacted) approach. Five samplings were conducted after dredging (3, 15, 30, 90, 180 days). The proportion of gravel in the sediment of the dredged site increased after dredging, while the organic matter decreased. The impact on the community was estimated at species level, using both univariate and multivariate analyses. The maximum negative effect on benthic macrofauna was a reduction by 65% for species richness (15 days after dredging) and by 75% for abundance (3 days after dredging). Between 15 and 30 days after dredging, the abundance of some species such as the molluscs Parvicardium exiguum and Retusa obtusa and the polychaete Pseudomalacoceros tridentata increased considerably in the dredged site, while typical ‘opportunistic’ species such as Capitella capitata were disfavoured by the disturbance. For this small‐scale dredging, about 6 months are required for the disturbed area to re‐establish a sediment structure and a macrobenthic community similar to the undisturbed area. Small‐patch dredging operations are proposed in harbour management whenever possible, since they allow a quick re‐adjustment of the initial sediment structure and benthic communities.     

Fishing safety policy and research

Fishing has been and is still one of the most dangerous of all human activities. In the field of fishing safety policy, it is acknowledged that the development of a working legal framework of reference is a vital prior condition for the implementation of measures aimed at its improving safety. However, the research work on fishing safety does not have at disposal records of a sufficient number of accidents and in most cases is not comparable from one country to another. Moreover, there is no work that focuses on a global view of fishing safety. The aim of the present work is to outline the state-of-the-art in fishing safety. To this end, aspects of fishing safety which are a major concern of institutions, organizations and researchers alike are analysed. Thus, several questions are addressed, such as: what institutional policy is given to the activity of the fishing sector to improve safety; what aspects and/or parameters are normally used to analyse fishing accidents; what is the usual spatial domain of this analysis; and what are the topics of the research carried out in fishing safety? The results of this analysis, among other aspects, identify eight specific lines of research followed in fishing safety and five which deal with aspects of safety at sea related to the fishing sector.     

Petrographic and geochemical characterization of the granitic rocks of the Araguainha impact crater,Brazil

Petrographic and geochemical data obtained on the Araguainha impact crater (Goiás/Mato Grosso States, Brazil) indicate the existence of several molten products that originated during impact‐induced congruent melting of an alkali‐granite exposed in the inner part of the central uplift of the structure. Although previous studies have described these melts to some extent, there is no detailed discussion on the petrographic and geochemical variability in the granite and its impactogenic derivatives, and therefore, little is known about the geochemical behavior and mobility of trace elements during its fusion in the central part of the Araguainha crater. This paper demonstrates that the preserved granitoid exposed in the core of the structure is a magnesium‐rich granite, similar to postcollisional, A‐type granites, also found in terrains outside the Araguainha crater, in the Brasília orogenic belt. The molten products are texturally distinct and different from the original rock, but have very similar geochemical composition, making it difficult to separate these lithotypes based on concentrations of major and minor elements. This also applies for trace and rare earth elements (REE), thus indicating a high degree of homogenization during impact‐induced congruent melting under high pressure and postshock temperature conditions. Petrographic observations, along with geochemical data, indicate that melting occurs selectively, where some of the elements are transported with the melt. Simultaneously, there is an effective dissolution of the rock (granite), which leads to entrainment of the most resistant solid phases (intact or partially molten minerals) into the melt. Minerals more resistant to melting, such as quartz and oxides, contribute substantially to a chemical balance between the preserved granite and the fusion products generated during the meteoritic impact.     

Syntectonic emplacement of the Middle Jurassic Concón Mafic Dike Swarm, Coastal Range, central Chile (33° S)

The Concón Mafic Dike Swarm (CMDS) consists of basaltic to andesitic dikes emplaced into deformed Late Paleozoic granitoids during the development of the Jurassic arc of central Chile. The dikes are divided into an early group of thick dikes (5–12 m) and a late group of thin dikes (0.5–3 m). Two new amphibole ⁴⁰Ar/³⁹Ar dates obtained from undeformed and deformed dikes, constrain the age of emplacement and deformation of the CMDS between 163 and 157 Ma. Based on radiometric ages, field observations, AMS studies and petrographic data, we conclude that the emplacement of the CMDS was syntectonic with the Jurassic arc extension and associated with sinistral displacements along the NW-trending structures that host the CMDS. The common occurrence of already deformed and rotated xenoliths in the dikes indicates that deformation in the granitoids started previously.The early thick dikes and country rocks appear to have been remagnetized during the exhumation of deep-seated coastal rocks in the Early Cretaceous (around 100 Ma). The remanent magnetization in late thin dikes is mainly retained by small amounts of low-Ti magnetite at high temperature and pyrrhotite at low temperature. The magnetization in these dikes appears to be primary in origin. Paleomagnetic results from the thin dikes also indicate that the whole area was tilted  23° to the NNW during cooling of the CMDS.The NNW–SSE extension vectors deduced from the paleomagnetic data and internal fabric of dikes are different with respect to extension direction deduced for the Middle–Late Jurassic of northern Chile, pointing to major heterogeneities along the margin of the overriding plate during the Mesozoic or differences in the mechanisms driving extension during such period.