The nature of η carinae

We give an overview of the Car phenomenon on the basis of ground and space observations. We discuss in particular the IRAS images. We conclude that Car, initially with a mass > 100M , is presently an intermediate-type hypergiant withL=5×10⁶ L , in a rapid evolutionary stage. This phase started with a large increase of mass loss in mid-1800 followed by dust condensation and a large visual fading, at constant bolometric luminosity.Paper presented at the 11th European Regional Astronomical Meetings of the IAU on New Windows to the Universe, held 3–8 July, 1989, Tenerife, Canary Islands, Spain.     

Nir surface photometry of star-forming regions

We present a set of maps of the star-forming regions S140, Re 50, and Mon R2 in theJ, H, andK infrared bands (i.e., 1.2, 1.65, and 2.2 m), obtained with a resolution of 7 and 14 arc sec at the infrared 1.5 m TIRGO telescope, with the TIRGO InSb single channel photometer operating in a mapping mode.Paper presented at the 11th European Regional Astronomical Meetings of the IAU on New Windows to the Universe, held 3–8 July, 1989, Tenerife, Canary Islands, Spain.     

Geochemistry of silicic magmas in the Macolod Corridor, SW Luzon, Philippines: evidence of distinct, mantle-derived, crustal sources for silicic magmas

Silicic volcanic deposits (>65 wt% SiO₂), which occur as domes, lavas and pyroclastic deposits, are relatively abundant in the Macolod Corridor, SW Luzon, Philippines. At Makiling stratovolcano, silicic domes occur along the margins of the volcano and are chemically similar to the silicic lavas that comprise part of the volcano. Pyroclastic flows are associated with the Laguna de Bay Caldera and these are chemically distinct from the domes and lavas at Makiling stratovolcano. As a whole, samples from the Laguna de Bay Caldera contain lower concentrations of MgO and higher concentrations of Fe₂O_3(t) than the samples from domes and lavas. The Laguna de Bay samples are more enriched in incompatible trace elements. The silicic rocks from the domes, Makiling Volcano and Laguna de Bay Caldera all contain high alkalis and high K₂O/Na₂O ratios. Melting experiments of primitive basalts and andesites demonstrate that it is difficult to produce high K₂O/Na₂O silicic magmas by fractional crystallization or partial melting of a low K₂O/Na₂O source. However, recent melting experiments (Sisson et al., Contrib Mineral Petrol 148:635–661, 2005) demonstrate that extreme fractional crystallization or partial melting of K-rich basalts can produce these silicic magmas. Our model for the generation of the silicic magmas in the Macolod Corridor requires partial melting of mantle-derived, evolved, moderate to K-rich, crystallized calc-alkaline magmas that ponded and crystallized in the mid-crust. Major and trace element variations, along with oxygen isotopes and ages of the deposits, are consistent with this model. Electronic Supplementary Material Supplementary material is available for this article at     

Hydrochemistry and isotope geochemistry as tools for groundwater hydrodynamic investigation in multilayer aquifers: a case study from Lomellina, Po plain, South-Western Lombardy, Italy

A multicriteria approach in studying hydrodynamics of a multilayer aquifer system has been used in the Lomellina region (Northern Italy). It involves the reconstruction of the hydrogeological framework coupled to the definition of the hydrochemical and isotopic features of the aquifers. A shallow phreatic aquifer, reaching depths of about 60–80 m from the surface, and deeper aquifers containing confined groundwater, were distinguished. Groundwater generally shows mineralisation decreasing with depth; dissolved ions depict calcium-bicarbonate hydrochemical facies and stable isotopes define the recharge mechanisms, the origin of groundwater, and the hydraulic confinement of deep aquifers. The phreatic aquifer is fed by local infiltration and by streams and irrigation channels. Tritium and Carbon-14 groundwater dating indicate long residence times (on the order of thousands of years) for confined aquifers. The confined aquifers show essentially passive hydrodynamic conditions and maintain a higher piezometric level than the phreatic aquifer. This inhibits the possibility of recent water penetrating far below the surface. The hydrogeological setting of the Lomellina region displays features which are common to other sectors of the Po plain. As a consequence, the results of this study, although conducted on a restricted area, are highly illustrative of groundwater hydrodynamics in large sedimentary aquifers.     

G856磁力仪在地磁台站建设中的应用与实践方法

本文通过泉州地磁台重建工程中的工作实践,阐述了应用G856磁力仪在建筑材料磁性检测、施工过程中磁性跟踪监测的实践方法。     

Sediment yield and storage variations in the Négron River catchment (south western Parisian Basin,France) during the Holocene period

In the Négron River catchment area (162 km²), surface‐sediment stores are composed of periglacial calcareous ‘grèze’ (5 × 10⁶ t) and loess (21 × 10⁶ t), and Holocene alluvium (12·6 × 10⁶ t), peat (0·6 × 10⁶ t) and colluvium (18·5 × 10⁶ t). Seventy‐five per cent of the Holocene sediments is stored along the thalwegs. Present net sediment yield, calculated from solid discharge at the Négron outlet, is low (0·6 t km^?2 a^?1) due to the dominance of carbonate rocks in the catchment. Mean sediment yield during the Holocene period is 7·0 t km^?2 a^?1 from alluvium stores and 7·6 t km^?2 a^?1 from colluvium stores. Thus, the gross sediment yield during the Holocene period is about 18·7 t km^?2 a^?1 and the sediment delivery ratio 3 per cent. The yield considerably varies from one sub‐basin to another (3·9 to 24·5 t km^?2 a^?1) according to lithology: about 25 per cent and 50 per cent of initial stores of periglacial grèze and loess respectively were reworked during the Holocene period. Sediment yield has increased by a factor of 6 in the last 1000 years, due to the development of agriculture. The very high rate of sediment storage on the slope during that period (88 per cent of the yield) can be accounted for by the formation of cultivation steps (‘rideaux’). It is predicted that the current destruction of these steps will result in a sediment wave reaching the valley floors in the coming decades. Subboreal and Subatlantic sediments and pollen assemblages in the Taligny marsh, where one‐third of the alluvium is stored, show the predominant influence of human activity during these periods in the Négron catchment. Copyright © 2002 John Wiley & Sons, Ltd.     

Modeling of Rayleigh waves dispersion in the Sannio region (Southern Italy) from seismic active refraction data

Short period surface waves, recorded during a seismic refractionsurvey in the Sannio region (Southern Italy), have been modeled to infera shallow velocity model for the area. Based on the decrease of resolutionwith depth, due to the bias on group velocity estimates arising frominterference of the Rayleigh waves with higher modes, we carried out aprocedure of fitting, with synthetic seismograms, of selected filtered traceswith a gaussian filter, having a width at half height equal to 1 Hz and acentral frequency lying in the range [1,4] Hz. We estimated the likelihoodbetween synthetic and observed seismograms by measuring their semblance.In this way we were able to infer a more refined local velocity modelcharacterized by a high Vp and Vs vertical gradient in the sedimentarycover. Two ad hoc resolution studies, based on group velocity andamplitude data respectively, indicate that the local velocity model is a goodvelocity model also for the entire studied area. The increase in the numberof available data when using amplitude information allows us to make amore selective choice in the model parameter space (Vp and Vs of eachlayer) and to solve for the Vp/Vs ratio. The inferred Vp velocity in thehalf-space is equal to 2.8 km/s. This value is in excellent agreement withthat inferred by other authors (3 km/s) by modeling P-wave travel timevs. distance. The best-fit model furnish low Vp/Vs for the sedimentarycover so indicating a high degree of the sediment's compaction in thestudied area. The inferred shallow high-velocity gradient indicates thatthe shallow sedimentary layer in the area could trap and focus the energytraveling into it.     

Efficiency of base isolation systems in structural seismic protection and energetic assessment

This paper concerns the seismic response of structures isolated at the base by means of High Damping Rubber Bearings (HDRB). The analysis is performed by using a stochastic approach, and a Gaussian zero mean filtered non‐stationary stochastic process is used in order to model the seismic acceleration acting at the base of the structure. More precisely, the generalized Kanai–Tajimi model is adopted to describe the non‐stationary amplitude and frequency characteristics of the seismic motion. The hysteretic differential Bouc–Wen model (BWM) is adopted in order to take into account the non‐linear constitutive behaviour both of the base isolation device and of the structure. Moreover, the stochastic linearization method in the time domain is adopted to estimate the statistical moments of the non‐linear system response in the state space. The non‐linear differential equation of the response covariance matrix is then solved by using an iterative procedure which updates the coefficients of the equivalent linear system at each step and searches for the solution of the response covariance matrix equation. After the system response variance is estimated, a sensitivity analysis is carried out. The final aim of the research is to assess the real capacity of base isolation devices in order to protect the structures from seismic actions, by avoiding a non‐linear response, with associated large plastic displacements and, therefore, by limiting related damage phenomena in structural and non‐structural elements. In order to attain this objective the stochastic response of a non‐linear n‐dof shear‐type base‐isolated building is analysed; the constitutive law both of the structure and of the base devices is described, as previously reported, by adopting the BWM and by using appropriate parameters for this model, able to suitably characterize an ordinary building and the base isolators considered in the study. The protection level offered to the structure by the base isolators is then assessed by evaluating the reduction both of the displacement response and the hysteretic dissipated energy. Copyright © 2003 John Wiley & Sons, Ltd.     

3-D structural reconstruction of Moho in the Tangshan earthquake area by using inversion of curved interface

３ＤｓｔｒｕｃｔｕｒａｌｒｅｃｏｎｓｔｒｕｃｔｉｏｎｏｆＭｏｈｏｉｎｔｈｅＴａｎｇｓｈａｎｅａｒｔｈｑｕａｋｅａｒｅａｂｙｕｓｉｎｇｉｎｖｅｒｓｉｏｎｏｆｃｕｒｖｅｄｉｎｔｅｒｆａｃｅＸＩＡＯＬＩＮＧＬＡＩ（赖晓玲）ＸＩＡＮＫＡＮＧＺＨＡＮＧ...