Hydrothermal mixing,carbonate dissolution and sulfide precipitation in Mississippi Valley-type deposits

A large number of Mississippi Valley-Type (MVT) deposits are located within dissolution zones in carbonate host rocks. Some genetic models propose the existence of cavities generated by an earlier event such as a shallow karstification, that were subsequently filled with hydrothermal minerals. Alternative models propose carbonate dissolution caused by the simultaneous precipitation of sulfides. These models fail to explain either the deep geological setting of the cavities, or the observational features which suggest that the dissolution of carbonates and the precipitation of minerals filling the cavities are not strictly coeval. We present a genetic model inspired by the textural characteristics of MVT deposits that accounts for both the dissolution of carbonate and precipitation of sulfides and later carbonates in variable volumes. The model is based on the mixing of two hydrothermal fluids with a different chemistry. Depending on the proportion of the end members, the mixture dissolves and precipitates carbonates even though the two mixing solutions are both independently saturated in carbonates. We perform reactive transport simulations of mixing of a regional groundwater and brine ascending through a fracture, both saturated in calcite, but with different overall chemistries (Ca and carbonate concentrations, pH, etc). As a result of the intrinsic effects of chemical mixing, a carbonate dissolution zone, which is enhanced by acid brines, appears above the fracture, and another zone of calcite precipitation builds up between the cavity and the surrounding rock. Sulfide forms near the fracture and occupies a volume smaller than the cavity. A decline of the fluid flux in the fracture would cause the precipitation of calcite within the previously formed cavities. Therefore, dissolution of carbonate host rock, sulfide precipitation within the forming cavity, and later filling by carbonates may be part of the same overall process of mixing of fluids in the carbonate host rock.Editorial handling: C. Everett     

Conduit-vent structures and related proximal deposits in the Las Cañadas caldera, Tenerife, Canary Islands

The Las Cañadas caldera wall and the outer slopes of the caldera provide three-dimensional exposures of numerous proximal-welded fallout deposits and have been mapped in detail. As a result, some parts of the Ucanca and Guajara Formations of the stratigraphy of Martí et al. (1994) have been divided into members that correspond to individual eruptions. Mapping has also revealed the occurrence of conduit-vent structures associated with proximal-welded fallout deposits. Conduit-vent structures consist of an upper flaring area and a lower narrow conduit. Conduit-vent geometry and dimensions include cylindrical plugs and eruptive fissures steeply dipping towards the caldera depression and elongated vents. The flaring area can be rather asymmetric and is usually filled by down-vent rheomorphic flow of the proximal fallout deposit. The lower conduits are filled by lava plug, agglutination of juveniles onto conduit walls and dyke intrusion with eventual dome extrusion. The eruption dynamics of welded fallout deposits and magma fragmentation within the conduit are consistent with an evolution from explosive to effusive. In this context conduit flow regimes evolve from turbulent to annular flow in which the conduit is progressively choked, and laminar flow leading to the final conduit closure.     

A numerical study of the orbits of second species of the planar circular RTBP

We present a numerical study of the set of orbits of the planar circular restricted three body problem which undergo consecutive close encounters with the small primary, or orbits of second species. The value of the Jacobi constant is fixed, and we restrict the study to consecutive close encounters which occur within a maximal time interval. With these restrictions, the full set of orbits of second species is found numerically from the intersections of the stable and unstable manifolds of the collision singularity on the surface of section that corresponds to passage through the pericentre. A ‘skeleton’ of this set of curves can be computed from the solutions of the two-body problem. The set of intersection points found in this limit corresponds to the S-arcs and T-arcs of Hénon’s classification which verify the energy and time constraints, and can be used to construct an alphabet to describe the orbits of second species. We give numerical evidence for the existence of a shift on this alphabet that describes all the orbits with infinitely many close encounters with the small primary, and sketch a proof of the symbolic dynamics. In particular, we find periodic orbits that combine S-type and T-type quasi-homoclinic arcs.     

Regional stratigraphy and distribution of epigenetic stratabound celestine, fluorite, barite and Pb–Zn deposits in the MVT province of northeastern Mexico

Northeastern Mexico hosts numerous epigenetic stratabound carbonate-hosted low-temperature hydrothermal deposits of celestine, fluorite, barite and zinc-lead, which formed by replacement of Mesozoic evaporites or carbonate rocks. Such deposits can be permissively catalogued as Mississippi Valley-type (MVT) deposits. The deposits studied in the state of Coahuila are associated with granitic and metasedimentary basement highs (horsts) marginal or central to the Mesozoic Sabinas Basin. These horsts controlled the stratigraphy of the Mesozoic basins and subsequently influenced the Laramide structural pattern. The Sabinas Basin consists of ~6,000-m-thick Jurassic to Cretaceous siliciclastic, carbonate and evaporitic series. The MVT deposits are mostly in Barremian and in Aptian-Albian to Cenomanian formations and likely formed from basinal brines that were mobilized during the Laramide orogeny, although earlier diagenetic replacement of evaporite layers (barite and celestine deposits) and lining of paleokarstic cavities in reef carbonates (Zn–Pb deposits) is observed. Fluid inclusion microthermometry and isotopic studies suggest ore formation due to mixing of basinal brines and meteoric water. Homogenization temperatures of fluid inclusions range from 45°C to 210°C; salinities range from 0 to 26 wt.% NaCl equiv., and some inclusions contain hydrocarbons or bitumen. Sulfur isotope data suggest that most of the sulfur in barite and celestine is derived from Barremian to Cenomanian evaporites. Regional geology and a compilation of metallogenic features define the new MVT province of northeastern Mexico, which comprises most of the state of Coahuila and portions of the neighboring states of Nuevo León, Durango and, perhaps extends into Zacatecas and southern Texas. This province exhibits a regional metal zonation, with celestine deposits to the south, fluorite deposits to the north and barite and Zn–Pb deposits mostly in the central part.     

The Holocene Evolution of the Ebre Delta Catalonia, Spain

１　ＩｎｔｒｏｄｕｃｔｉｏｎＴｈｅｆｉｒｓｔｒｅｌｅｖａｎｔｉｎｆｏｒｍａｔｉｏｎａｂｏｕｔｔｈｅｇｅｏｌｏｇｙａｎｄｅｖｏｌｕｔｉｏｎａｒｙｔｒｅｎｄｓｏｆｔｈｅＥｂｒｅｄｅｌｔａｃａｍｅａｓｐａｒｔｏｆａｓｔｒａｔｉｇｒａｐｈｉｃｓｔｕｄｙｂｙＭａｌｄｏｎａｄｏＡ［１］．Ｈｅｍｅｎｔｉｏｎｅｄｔｈａｔｄｕｒｉｎｇｔｈｅｌａｓｔｔｒａｎｓｇｒｅｓｓｉｖｅｅｖｅｎｔ,ｔｈａｔｉｓｂｅｆｏｒｅｓｅａｌｅｖｅｌｒｅａｃｈｅｄｉｔｓｐｒｅｓｅｎｔｌｅｖｅｌ,ｄｅｌｔａｉｃｐｒｏｇｒａｄａｔｉｏｎｏｎｌ…     

Geomorphic monitoring and response to two dam removals: rivers Urumea and Leitzaran (Basque Country,Spain)

Dam removal has been demonstrated to be one of the most frequent and effective fluvial restoration actions but at most dam removals, especially of small dams, there has been little geomorphological monitoring. The results of the geomorphological monitoring implemented in two dams in the rivers Urumea and Leitzaran (northern Spain) are presented. The one from the River Urumea, originally 3.5 m high and impounding 500 m of river course, was removed instantaneously whereas that in the River Leitzaran, 12.5 m high, and impounding 1500 m of river course, is in its second phase of a four‐stage removal process. Changes in channel morphology, sediment size and mobility and river bed morphologies were assessed. The monitoring included several different techniques: topographical measurements of the channel, terrestrial laser scanner measurements of river bed and bars, sediment grain size and transport; all of them repeated in four (May, August, November 2011 and May 2012) and five (July and September 2013, April and August 2014 and June 2015) fieldwork campaigns in the River Urumea and River Leitzaran, respectively. Geomorphic responses of both dam removals are presented, and compared. Morphological channel adjustments occurred mainly shortly after dam removals, but with differences among the one removed instantaneously, that was immediate, whereas that conducted by stages took longer. Degradational processes were observed upstream of both dams (up to 1.2 m and 4 m in the River Urumea and River Leitzaran, respectively), but also aggradational processes (pool filling), upstream of Inturia Dam (2.85 m at least). Less evident aggradational processes were observed downstream of the dams (up to 0.37 m and 0.50 m in the River Urumea and River Leitzaran, respectively). Flood events, especially a 100 year flood registered during the monitoring period of Mendaraz Dam removal, reactivated geomorphological processes as incision and bank erosion, whereas longitudinal profile recovery, grain‐size sorting and upstream erosion took longer. Copyright © 2016 John Wiley & Sons, Ltd.     

Geology,fluid inclusion and sulphur isotope characteristics of the El Cobre VHMS deposit,Southern Cuba

The El Cobre deposit is located in eastern Cuba within the volcanosedimentary sequence of the Sierra Maestra Paleogene arc. The deposit is hosted by tholeiitic basalts, andesites and tuffs and comprises thick stratiform barite and anhydrite bodies, three stratabound disseminated up to massive sulphide bodies produced by silicification and sulphidation of limestones or sulphates, an anhydrite stockwork and a siliceous stockwork, grading downwards to quartz veins. Sulphides are mainly pyrite, chalcopyrite and sphalerite; gold occurs in the stratabound ores. Fluid inclusions measured in sphalerite, quartz, anhydrite and calcite show salinities between 2.3 and 5.7 wt% NaCl eq. and homogenisation temperatures between 177 and 300°C. Sulphides from the stratabound mineralisation display δ ³⁴S values of 0‰ to +6.0‰, whilst those from the feeder zone lie between −1.4‰ and +7.3‰. Sulphides show an intra-grain sulphur isotope zonation of about 2‰; usually, δ ³⁴S values increase towards the rims. Sulphate sulphur has δ ³⁴S in the range of +17‰ to +21‰, except two samples with values of +5.9‰ and +7.7‰. Sulphur isotope data indicate that the thermochemical reduction of sulphate from a hydrothermal fluid of seawater origin was the main source of sulphide sulphur and that most of the sulphates precipitated by heating of seawater. The structure of the deposit, mineralogy, fluid inclusion and isotope data suggest that the deposit formed from seawater-derived fluids with probably minor supply of magmatic fluids.     

Gold-bearing hedenbergite skarns from the SW contact of the Andorra granite (Central Pyrenees, Spain)

Several varieties of skarn outcrop have been found to develop along the contact between the Andorra granite and the Devonian limestones. The skarns contain variable amounts of gold ranging up to 5 g/t, always associated with sulphides. The sulphides in the skarn include arsenopyrite and pyrrhotite with lesser amounts of chalcopyrite, galena, sphalerite and Bi-minerals. Geothermometric and geobarometric data indicate the skarns formed at about 2 kbar and temperatures ranging from 500 ° to 350 °C from CO₂-free polysaline brines at a slightly acidic pH and oxygen fugacity which decreases with time from the pyrite-pyrrhotite-magnetite towards the QFM buffer. Available data on gold solubility suggest that sufficient quantities of gold to form an ore deposit could have been transported as AuCl ₂ ^- at the high temperatures and salinities under which the skarns formed. Both gold deposition and sulphide precipitation could have occurred due to a decrease in temperature and/or oxygen fugacity.