Impact of reach geometry on stream channel sensitivity to extreme floods

Predicting spatial and temporal variations in bank erosion due to extreme floods presents a long‐standing challenge in geomorphology. We develop two methodologies for rapid, regional‐scale assessments of stream reaches susceptible to channel widening. The first proposes that channel widening occurs when unit stream power exceeds a critical threshold (300 W/m²). The second is motivated by the observation that widening often occurs at channel bends. We introduce a new metric, the bend stress parameter, which is proportional to the centripetal force exerted on a concave bank. We propose that high centripetal forces generate locally high bank shear forces and enhance channel bank erosion. We test both metrics using the geomorphic signature of Tropical Storm Irene (2011) on the White and the Saxtons Rivers, Vermont. Specifically, we test if reaches where significant channel widening occurred during Irene required one or both metrics to exceed threshold values. We observe two distinct styles of channel widening. Where unit stream power and bend stress parameter are high, widening is usually due to bank retreat. Elsewhere widening is usually due to the stripping of the upstream end of mid‐channel islands. Excluding widening associated with the stripping of the heads of mid‐channel islands, almost all the widening (> 98%) occurred along reaches identified as susceptible to widening. The combined metrics identify up to one‐quarter of the reaches lacking susceptibility to channel widening. Copyright © 2014 John Wiley & Sons, Ltd.     

Late Pleistocene baldcypress (Taxodium distichum) forest deposit on the continental shelf of the northern Gulf of Mexico

Approximately 13 km south of Gulf Shores, Alabama (United States), divers found in situ baldcypress (Taxodium distichum) stumps 18 m below the ocean surface. These trees could have only lived when sea level fell during the Pleistocene subaerially exposing the tectonically stable continental shelf. Here we investigate the geophysical properties along with microfossil and stratigraphical analyses of sediment cores to understand the factors that lead to this wood’s preservation. The stumps are exposed in an elongated depression (~100 m long, ~1 m deep) nested in a trough of the northwest–southeast trending Holocene sand ridges and troughs with 2–5 m vertical relief and ~0.5 km wavelength. Radiocarbon ages of the wood were infinite thus optically stimulated luminescence (OSL) dating was used to constrain the site’s age. Below the Holocene sands (~0.1–4 m thick), separated by a regional erosional unconformity, are Late Pleistocene mud-peat (72±8 ka OSL), mud-sand (63±5, 73±6 ka OSL), and palaeosol (56±5 ka OSL) facies that grade laterally from west to east, respectively. Foraminiferal analysis reveals the location of the terrestrial-marine transitional layer above the Pleistocene facies in an interbedded sand and mud facies (3940±30 (1σ) ¹⁴C a BP), which is part of a lower shoreface or marine-dominated estuarine environment. The occurrence of palaeosol and swamp facies of broadly similar ages and elevation suggests the glacial landscape possessed topographic relief that allowed wood, mud and peats to be preserved for ~50 ka of subaerial exposure before transitioning to the modern marine environment. We hypothesize that rapid sea-level rise occurring ~60 or ~40 ka ago provided opportunities for local flood-plain aggradation to bury the swamp thus preserving the stumps and that other sites may exist in the northern Gulf of Mexico shelf.     

The buckling of a corrugated carbon fibre cylinder under external hydrostatic pressure

A theoretical and an experimental investigation was carried out, where a carbon fibre corrugated circular cylinder was tested to destuction under external hydrostatic pressure. The theoretical investigation was via the finite element method, where the structure was modelled with several orthotropic axisymmetric thin-walled shell elements. The experimental observations were aided with strategically placed strain gauges. Comparison between theory and experiment showed that the experimentally observed buckling pressure was a little lower than the theoretical prediction. This may have been due to the fact that the model had slight initial geometrical imperfections in the circumferenential direction.     

Error analyses of resonant orbits for geodesy

An error analysis of resonant orbits for geodesy indicates that attempts to use resonance to recover high order geopotential coefficients may be seriously hampered by errors in the geopotential. This effect, plus the very high correlations (up to .99) of the resonant coefficients with each other and the orbital period in single satellite solutions, makesindividual resonant orbits of limited value for geodesy. Multiple-satellite, single-plane solutions are only a slight improvement over the single satellite case. Accurate determination of high order coefficients from low altitude resonant satellites requires multiple orbit planes and small drift-periods to reduce correlations and effects of errors of non-resonant geopotential terms. Also, the effects of gravity model errors on low-altitude resonant satellites make the use of tracking arcs exceeding two to three weeks of doubtful validity. Because high-altitude resonant orbits are less affected by non-resonant terms in the geopotential, much longer tracking arcs can be used for them.     

Flüssigkeitseinschlüsse mit Gasblasen als geologische Thermometer

Zusammenfassung Es wird unterschieden zwischen Einschlüssen, auf dieSorbys Grundannahme zutrifft, daß eine homogene Phase, wie Wasser, Salzlösung oder CO₂, eingeschlossen wurde, die Blasen also von dem Gas der eingeschlossenen Flüssigkeit gebildet werden, und solchen Einschlüssen, in denen fremdes Gas mit eingeschlossen wurde.Sorby-Einschlüsse können zur Temperaturbestimmung herangezogen werden, wenn entweder der Druck am Bildungsort bekannt ist oder sein Einfluß vernachlässigt werden kann, weil der Füllungsgrad so hoch ist, daß die Libelle schon bei niederen Temperaturen verschwindet. Ist fremdes Gas in der Flüssigkeit gelöst eingeschlossen worden und erst beim Abkühlen frei geworden, so ist der Schluß von der Füllungstemperatur auf die Bildungstemperatur noch unsicherer als bei Sorby-Einschlüssen, weil über den zu erwartenden großen Einfluß des Druckes noch nichts bekannt ist.Ist fremdes Gas als Gasblase eingeschlossen worden, so kann die Füllungstemperatur sehr weit von der Bildungstemperatur abweichen und beim Erwärmen sogar zuerst größer werden. Solche Nicht-Sorby-Einschlüsse sind zu erkennen durch Messung des Füllungsgrades und Vergleich der zugehörigen Füllungstemperatur mit der von Wasser bzw. CO₂ bei gleichem Füllungsgrad.Die Frage, aus was die Einschlüsse bestehen, ist nicht nur für die Temperaturbestimmung von Wert, sondern auch für viele Fragen der Gesteinsbildung und -umbildung. Es wird auf die schon vonBrewster 1826 angegebene Methode der Bestimmung der Brechungszahl mit Hilfe der Totalreflexion hingewiesen.Alle diese Bemerkungen gelten sowohl für primäre wie für sekundäre Einschlüsse.Die Dekrepitationsmethode kann weder primäre und sekundäre Einschlüsse unterscheiden noch die Natur des Einschlusses, noch auch den Füllungsgrad berücksichtigen.     

A framework to facilitate development and testing of image-based river velocimetry algorithms

Image-based methods have compelling, demonstrated potential for characterizing flow fields in rivers, but algorithms like particle image velocimetry (PIV) must be further tested and improved to enable more effective use of these techniques. This paper presents a framework designed for this exact purpose: Simulating Hydraulics and Images for Velocimetry Evaluation and Refinement (SHIVER). The approach involves coupling a hydrodynamic model with a synthetic particle generator to advect particles between frames, as dictated by local velocity vectors and thus construct a plausible image sequence specific to the reach of interest. The resulting time series can then be used as input to a velocimetry algorithm to compare image-derived estimates with known (modelled) velocities to perform an exhaustive, spatially distributed accuracy assessment. As an example application of SHIVER, we examined the effects of interrogation area (IA) size, frame rate, flow velocity, and image sequence duration on the performance of a standard PIV algorithm. This analysis indicated that image-derived velocities were generally in close agreement with those from the flow model (root mean square error <10% and mean bias <3%), except when small IAs were coupled with low frame rates. Velocity estimates were most accurate for the lowest modelled discharge ( $$ at baseflow) and became less reliable as the mean flow velocity increased ( $$ for an intermediate discharge and $$ at bankfull). Accuracy was essentially independent of image sequence duration, implying that long occupations might not be necessary. Errors were concentrated along channel margins, where PIV-based velocities tended to be greater than those from the flow model. Small IAs led to underpredictions of velocity, while larger IAs led to overpredictions. SHIVER is highly modular and could be updated to make use of different hydrodynamic models or image simulators. The framework could also facilitate more thorough sensitivity analyses and comparison of various velocimetry algorithms.