Study of weathering processes developed on old piedmont surfaces in Western Spain: new contributions to the interpretation of the “Raña” profiles

The Hercynian basement of the Iberian Peninsula was uplifted by the Alpine orogeny during the Tertiary. It gave rise to a set of block mountains and tectonic grabens, one of which is the Ciudad Rodrigo Basin. It is located in Western Spain and forms a westward extension of the great Tertiary Duero Basin. The sediments filling this graben are of continental origin, their ages ranging from Palaeogene to Quaternary. Morphologically, the southern part of this basin forms a set of piedmont surfaces (the “Raña” surfaces) appearing above the terrace system of the present rivers. This paper examines the weathering processes developed over these old piedmont surfaces using micromorphological, XR diffraction, scanning electron microscopy (SEM) and microporosity techniques.The Raña sediments are rich in quartzite pebbles and gravel within a clayey matrix. Once deposited, these materials underwent important in situ weathering processes under somewhat hydromorphic conditions, of which hydrolysis, ferrolysis and xerolysis were the most important. All these processes gave rise to: (1) transformation of most of the clasts of shists and slates into a matrix causing the destruction of the original sedimentary structures and a relative concentration of the resistant lithologies (quartzites and quartz); (2) important changes in the clay fraction, leading to a predominance of kaolinite in the upper levels of the profiles, (3) release of elements from primary minerals, Fe being one of the most important, and (4) redistribution of matter, mainly clay and Fe oxyhydroxides, within the profiles.The coexistence of seasonal periods with pF higher than 4.2 repeated over a long time, together with poor internal and external drainage conditions, are the cause of the special features displayed by Raña deposits.     

Luxury Tourism and Regional Economic Development in Mexico

This article argues that little attention has been paid to the territorial and socioeconomic impact of consumer–service globalization on Third World countries. It specifically examines the economic role of tourism in Mexico and its limited effect on the country's regional development. Despite governmental support in order to enhance economic growth, currency receipts, and employment, tourism contributes less than 5 percent to the gross domestic product, and the majority of tourism–related jobs are precarious and low–skilled. The promotion of luxury resorts in coastal areas has led to highly concentrated and fast–growing enclaves of mainly foreign investment. However, this strategy has failed to stimulate productive links between tourist centers and their hinterlands and has led to large–scale urbanization characterized by a considerable lack of basic services for the resident population.     

An experimental study of nominally symmetric and asymmetric structures isolated with the FPS

This experimental investigation deals with the earthquake behaviour of a nominally symmetric and a mass‐asymmetric three‐storey structural model isolated with the frictional pendulum system (FPS). Both accidental and natural torsion are evaluated in the structure by using recorded accelerations in all building floors and measured deformations at the isolation level. A 3D‐shaking table was used to subject the model to five different ground motions, including impulsive as well as far‐field subduction‐zone type earthquakes. Results show that the analytical predictions of the earthquake behaviour of the isolated structure, as obtained from a physical model of the FPS, are in close agreement with the true complex inelastic measured behaviour of the FPS. Besides, experimental results also validate previous observations about the importance of accounting for the variability of the normal loads in modelling the earthquake behaviour of FPS isolators. Measured torsional deformation amplifications at the base of the building vary, in the mean, from 2.5% to 6% for the symmetric and asymmetric structural configurations, respectively. In relation to the fixed base structure, the reduction factors for the base shear of the isolated structure are, in the mean, about 3.9 for both configurations. Finally, it is concluded that the FPS is capable of controlling the lateral–torsional motions of mass‐asymmetric structures quite effectively by aligning the centre of mass of the superstructure with the centre of pendular and frictional resistance of the isolation system. Copyright © 2003 John Wiley & Sons, Ltd.     

Physical model for dynamic analysis of structures with FPS isolators

This article presents a physical model for frictional pendulum isolators (FPS) that is ready to be implemented in most commercial software. The model is capable of accounting for effects such as large deformations, sticking, and uplift and impact by sensing the normal loads in the isolators through a gap element. Sticking has been incorporated into the model by extending the Park–Wen hysteretic model to the case of large deformations. The proposed model has been tested against a theoretically ‘exact’ formulation leading to essentially identical results. To facilitate its use, the physical FPS model has been cast into a typical non‐linear structural element format, i.e. with deformation as input and restoring force as output. Examples of a building and a bridge have been chosen to show the potential of the element and to provide further insight into the earthquake response of structures with FPS isolators; in particular, in aspects such as the orientation in placement of the isolator, sticking, P? Δ, and other large deformation effects. Copyright © 2003 John Wiley & Sons, Ltd.     

The stability of a remediated bed in Hamilton Harbour,Lake Ontario,Canada

ABSTRACT In situ measurements of lakebed sediment erodibility were made on three sites in Hamilton Harbour, Lake Ontario, using the benthic flume Sea Carousel. Three methods of estimating the surface erosion threshold (τ_c(0)) from a Carousel time series were evaluated: the first method fits measures of bed strength to eroded depth (the failure envelope) and evaluates threshold as the surface intercept; the second method regresses mean erosion rate (E_m) with bed shear stress and solves for the floc erosion rate (E_f) to derive the threshold for E_m = E_f = 1 × 10^?5 kg m^?2 s^?1; the third method extrapolates a regression of suspended sediment concentration (S) and fluid transmitted bed shear stress (τ₀) to ambient concentrations. The first field site was undisturbed (C) and acted as a control; the second (W) was disturbed through ploughing and water injection as part of lakebed treatment, whereas the third site (OIP) was disturbed and injected with an oxidant used for remediation of contaminated sediment. The main objectives of this study were: (1) to evaluate the three different methods of deriving erosion threshold; (2) to compare the physical behaviour of lacustrine sediments with their marine estuarine counterparts; and (3) to examine the effects of ploughing and chemical treatment of contaminated sediment on bed stability. Five deployments of Sea Carousel were carried out at the control site. Mean erosion thresholds for the three methods were: τ_c(0) = 0·5 (±0·06), 0·27 (±0·01) and 0·34 (±0·03) Pa respectively. Method 1 overpredicted bed strength as it was insensitive to effects in the surface 1–2 mm, and the fit of the failure envelope was also highly subjective. Method 2 exhibited a wide scatter in the data (low correlation coefficients), and definition of the baseline erosion rate (E_f) is largely arbitrary in the literature. Method 3 yielded stable (high correlation coefficients), reproducible and objective results and is thus recommended for evaluation of the erosion threshold. The results of this method correlated well with sediment bulk density and followed the same trend as marine counterparts from widely varying sites. Mass settling rates, expressed as a decay constant, k, of S(t), were strongly related to the maximum turbidity at the onset of settling (S_max) and were also in continuity with marine counterparts. Thus, it appears that differences in salinity had little effect on mass settling rates in the examples presented, and that biological activity dominated any effects normally attributable to changes in salinity. Bedload transport of eroded aggregates (2–4 mm in diameter) took place by rolling below a mean tangential flow velocity (U_y) of 0·32 ms^?1 and by saltation at higher velocities. Mass transport as bedload was a maximum at U_y = 0·4 ms^?1, although bedload never exceeded 1% of the suspended load. The proportion of material moving as bedload was greatest at the onset of erosion but decreased as flow competence increased. Given the low bulk density and strength of the lakebed sediment, the presence of a bedload component is notable. Bedload transport over eroding cohesive substrates should be greater in estuaries, where both sediment density and strength are usually higher. Significant differences between the ploughed and control sites were apparent in both the erosion rate and the friction coefficient (φ), and suggest that bed recovery after disruption is rapid (< 24 h). τ_c(0) increased linearly with time after ploughing and recovered to the control mean value within 3 days. The friction coefficient was reduced to zero by ploughing (diagnostic of fluidization), but increased linearly with time, regaining control values within 6 days. No long‐term reduction in bed strength due to remediation was apparent.     

Pre-Caving, Drilling and Blasting in the Esmeralda Sector of the El Teniente Mine

El Teniente Mine has developed the method of panel caving as an innovative pre-conditioning caving alternative for traditional mining of sectors located in primary rock. In applying this method, caving speed and area incorporation are the most relevant parameters to establish a desired production level in a specified sector. This is the context in which continuous improvements to several design alternatives have been developed and applied to optimize mine caving. Mine caving, by drilling and blasting, results in a narrow base cut of ore columns not larger than the height of the caving galleries, which usually measure 3.6 m. These confined blasting operations require drilling parallel blastholes that extend from the floor to the roof of the caving gallery. Panel caving aims at mitigating subvertical field stress transmission to the lower levels of the caving gallery. This improves the stability and helps maintain the advancement of the caved zone at the caving level, with respect to the development, preparation and ore mining activities in the production level. This paper analyzes and evaluates different panel caving alternatives. The result is the identification of the most adequate panel caving alternative for conditions in the Esmeralda Mine given safety, technical, operational and economic considerations.     

Preliminary Rock-Slope-Susceptibility Assessment Using GIS and the SMR Classification

This paper aims to examine the impact of large-scale structuraladjustments (like the Greater Dhaka Flood Protection Project, GDFPP) on local living environment.It focuses the importance of environmental factors in flood hazard mitigation, and examines theenvironmental attitudes of the floodplain residents arising from the large-scale structural adjustments.Based on `perceived natural hazard research perspectives', this paper examines: (i) the reasons for persistentfloodplain occupation, and (ii) the importance of environmental factors in the choice, motivations and decision-makingof floodplain residents.This research used data collected from 300 households situated inthe eastern part of Dhaka. The face-to-face household survey data provided individuals' responses to a structuredquestionnaire on hazards and environment. Survey concerned urban floodplains, and looked fordata on housing, household characteristics, and residents' attitudes. Results of interview surveys wereused to: (i) explore the reasons of floodplain occupation, and (ii) residents' attitudes to tolerable levelof flood risk and willingness to accept environmental change resulting from the proposed structural embankments inthe eastern perimeter of Dhaka City, Bangladesh.Findings revealed that floodplain occupation (by theindividuals' decision-making) was a result of overall reaction to the Government's structuraladjustment policies that resulted from institutional, locational and socio-economic factors. The attitude survey results provided residents' perception to hazards and environment to be dependenton the socio-economic factors – but in a complex manner, many factors are interrelated.In addition to support for structural embankments, the study sample displayed a common concernand widespread environmental awareness. In terms of any `trade-off' between thebenefits (resources) from the embankments and costs (hazards) due to the detrimental impact on environment, the residents of Dhaka, despite some concern forsacrificing embankments for environment, tended to show a generalconsensus for embankments.     

Environmental impact of heavy-metal dispersion in the Huerva River (Iberian Range,NE Spain)

In this study, the methodology of geochemical prospecting has been applied to the study of cadmium, lead, copper and zinc dispersion in the fine sediments of the upper course of the Huerva River (Iberian Range, NE Spain). The survey was organised in two stages: (1) general sampling along the river and its tributary channels, aimed at selecting the sections with the highest contents of the target elements, and (2) detailed study of those sections, aimed at an interpretation of possible positive geochemical anomalies and identification of their sources. The results of this study prove the existence of multiple and complex sources, with a significant influence of sources related to anthropogenic activity. However, the system shows a good ability to depurate itself under current conditions.