Evaluating igneous sources of the Taveyannaz formation in the Central Alps by detrital zircon U–Pb age dating and geochemistry

Late Palaeogene syn-tectonic volcanic products have been found in the Northern Alpine foreland basin and in the South Alpine hemipelagic basin. The source of abundant volcanic fragments is still in debate. We analyzed the geochronology and geochemistry of detrital zircons, and evaluated their temporal and genetic relationships with potential volcanic sources. The study shows that the detrital zircon U–Pb age patterns have two major age groups: a dominance (ca. 90%) of pre-Alpine zircons was found, as commonly observed in other Alpine flysch formations. These zircons apparently derived from erosion of the early Alpine nappe stack in South Alpine and Austroalpine units. Furthermore, a few Neo-Alpine zircons (ca. 10%) have ages ranging from Late Eocene to Early Oligocene (~ 41–29 Ma). Both source materials were mixed during long riverine transport to the basin margins before being re-deposited by gravity flows. These Palaeogene ages match with the activity of Peri-Adriatic magmatism, including the Biella volcanic suite as well as the Northern Adamello and Bergell intrusions. The values of REE and ¹⁷⁶Hf/¹⁷⁷Hf_(t) ratios of the Alpine detrital zircons are in line with the magmatic signatures. We observe an in time and space variable supply of syn-sedimentary zircons. From late Middle Eocene to Late Eocene, basin influx into the South Alpine and Glarus (A) basins from the Northern Adamello source is documented. At about 34 Ma, a complete reorganisation is recorded by (1) input of Bergell sources into the later Glarus (B) basin, and (2) the coeval volcaniclastic supply of the Haute-Savoie basin from the Biella magmatic system. The Adamello source vanished in the foreland basin. The marked modification of the basin sources at ~ 34 Ma is interpreted to be initiated by a northwestern shift of the early Alpine drainage divide into the position of the modern Insubric Line.     

Spatial and temporal variations of suspended solid concentrations from 2000 to 2013 in Poyang Lake,China

Concentrations of suspended solids in lakes can affect the latter’s primary productivity and reflect changes in sediment deposition. Determining the temporal and spatial distribution of suspended solid concentrations has important significance in lake water environmental management; this is particularly urgent for Poyang Lake, the largest freshwater lake in China. In this study, suspended solid concentration inversion models for Poyang Lake were created using a semi-empirical method with regression analysis between continuously measured suspended solid concentration data and multi-band moderate-resolution imaging spectroradiometer images for spring, summer, autumn, and winter from 2009 to 2012. The coefficient of determination (R²) is from 0.6 to 0.9 and the average relative error for the accuracy verification was between 10 and 30%. The seasonal distributions of suspended solid concentrations in Poyang Lake from 2000 to 2013 were then obtained using optimal reversal models. The results showed that the seasonal variation in suspended solid concentrations had a “W” shape in which high spring and autumn and low summer and winter values. The suspended solid concentrations increased annually from 2000 to 2013 and were mainly distributed in the northern and central portions of the lake, with lower values along the shorelines. Further analysis indicated that the large difference in water level between the wet and dry seasons is an important factor in explaining these seasonal variations. Moreover, the suspended solid concentrations were poorly correlated with water temperature and chlorophyll-a concentration but more highly correlated with the deferred chlorophyll-a concentration.     

Synthesis and characterisation of a multifunctional oil-based drilling fluid additive

An oil-based drilling fluid additive H-DEA (or humic acid-cocamide diethanolamine) was synthesised using humic acid and cocamide diethanolamine as raw materials. The rheological behaviors of H-DEA showed that the synthesised product has the good properties in both decreasing the filtrate loss and improving rheology property of oil-based drilling fluids compared with other commercially available additives. Under the optimal additive amount of 3%, both API filtrate loss and yield point changed remarkably from 5.40 to 0.41 mL and 9.0 to 25.6 Pa, respectively. Furthermore, differential scanning calorimetry (DSC) showed that H-DEA has good thermal stability in a wide temperature range up to 170 °C. Infrared spectroscopy (IR) and rheological analysis revealed that the possible mechanism of the multifunctional effects may be attributed to the existing of high density of strong polar groups, hydrogen bonds, electrostatic forces, and intermolecular association on H-DEA molecular structure. The results of the study showed that the synthesised H-DEA can be potentially used as a multifunctional oil-based drilling fluid additive in oil-drilling excavation.     

A direction-dependent shear strength criterion for rock joints with two new roughness parameters

The surface morphology of a rock joint is closely related to its mechanical properties. To reasonably characterize a rock surface, two new roughness parameters were proposed in this paper. One is related to the average slope angle of asperities that contribute to the shear strength, and the other reflects the frictional behavior of asperities that is defined as the maximum possible contact area in the shear direction. Taking the standard joint roughness coefficient profiles as example, these two roughness parameters can be applied to describe the directional characteristics of shear strength. Based on their relationships with initial dilation angles, the proposed roughness parameters were incorporated into a peak shear strength criterion. It is shown that the predicted peak shear strength is consistent with experimental data, and there is a power–law relationship. The application range of new roughness parameters was determined, which may facilitate a measurement process.     

车排子凸起与沙湾凹陷过渡带的构造模型

车排子凸起位于准噶尔盆地扎伊尔山前,是夹持在南部四棵树凹陷和东部沙湾凹陷之间的三角构造带。然而对这个三角构造带是原地掩伏构造,山前推覆构造,还是走滑构造控制形成的认识存在争议。目前对于车排子凸起与沙湾凹陷过渡带的构造变形特征以及变形机制的认识尚不清楚。而过渡带是研究该区构造变形与演化的良好区域,精细研究该区域构造几何学与运动学对于揭示其构造变形机制以及认识盆山之间的关系具有积极作用,并对于该区油气勘探具有重要意义。本文以研究区的连片三维地震资料为基础,运用不整合面识别、轴面分析及平衡剖面等方法,对车排子凸起与沙湾凹陷过渡带进行精细的构造解析、建模与构造复原。研究表明,过渡带发育下二叠统（P₁j-P₁f）,中二叠统（P₂x-P₂w）,上二叠统（P₃w）,三叠系（T）,侏罗系（J）,白垩系（K）与古近系-第四系（E-Q）7个构造变形层序。发育佳木河组底部及石炭系内部滑脱层。深部（前二叠系）构造楔发育于整个过渡带,其个数和几何学形态的变化直接影响了上覆背斜形态。构造楔在早二叠世开始楔入,挤压作用持续至三叠纪末期。晚三叠世发育生长地层,显示了P-T构造层褶皱变形的时间,随后三叠纪末期,过渡带受到来自西北缘造山带方向的逆冲推覆构造的叠加作用,表现在后缘发育一系列叠瓦构造,推覆距离约为8 km,南部逆冲断层上盘二叠系-三叠系被剥蚀完全,北部残余少量下二叠统佳木河组。     

Club convergence and spatial distribution dynamics of carbon intensity in China’s construction industry

Climate change caused by carbon emissions continuously threatens sustainable development. Due to China’s immense territory, there are remarkable regional differences in carbon emissions. The construction industry, which has strong internal industrial differences, further leads to carbon emission disparity in China. Policymakers should consider spatial effects and attempt to eliminate carbon emission inequality to promote the sustainable development of the construction industry and realize emission reduction targets. Based on the classic Markov chain and spatial Markov chain, this paper investigates the club convergence and spatial distribution dynamics of China’s carbon intensity in the construction industry from 2005 to 2014. The results show that the provincial carbon intensity in the construction industry is characterized by “convergence clubs” during the research period, and very low-level and very high-level convergence clubs have strong stability. Moreover, the carbon intensity class transitions of provinces tend to be consistent with that of their neighbors. Furthermore, the transition of carbon intensity types is highly influenced by their regional backgrounds. The provinces with high carbon emissions have a negative influence on their neighbors, whereas the provinces with low carbon emissions have a positive influence. These analyses provide a spatial interpretation to the “club convergence” of carbon intensity.     

Intraseasonal oscillation of the rainfall variability over Rwanda and evaluation of its subseasonal forecasting skill

非洲中东部地区的经济主要依靠自给农业支撑,该地区农业经济对降水的变化尤为敏感.本文以卢旺达为例,观测分析指出卢旺达的次季节降雨主要集中在10-25天;根据次季节尺度降水变率的单点相关方法,发现卢旺达的次季节降水变率和周围区域变化一致;进一步合成结果显示该地区次季节降水变率与异常西风有关,这可追溯到赤道地区西传的赤道Rossby波.最后,本文评估了当前动力模式ECMWF对 卢旺达地区(即非洲中东部)次季节降水变率的预报能力,发现EC模式在对该区域降水和相关风场指数的预报技巧都在18天左右,且预报技巧表现出一定的年际差异,这可能与热带太平洋的背景海温信号有关.该工作增进了当 前对非洲中东部地区的次季节降水变率和预测水平的认知,并且对该地区国家粮食安全和防灾减灾具有启示性意义.     

Intraseasonal oscillation of the southwest monsoon over Sri Lanka and evaluation of its subseasonal forecast skill

斯里兰卡的雨季发生于5-9月间,主要受西南季风的控制.本文发现该地区的西南季风降水存在很强的次季节变率,主导周期为10-35天.降水的季节内变化与西传的异常气旋有关.进一步,利用S2S比较计划中欧洲中心的数值预报模式(ECMWF)提供的回报试验数据,评估了当今动力模式对斯里兰卡西南季风次季节变化的预报技巧.结果显示,对季风指数的预测技巧超过30天,而对降水指数的预测技巧大约两周,且模式的预报技巧具有明显的年际差异.分析表明,能否正确模拟出大尺度环流对热带对流的响应是影响斯里兰卡降水预测的重要因子.     

序列蒙特卡洛算法的数字地图线状特征跟踪模型

针对数字地图中的线状特征,如道路、河流的提取问题,该文提出一种基于序列蒙特卡洛的特征提取算法。算法利用粒子滤波方法与贝叶斯模型的建模思路,描述数字地图道路的状态及其观测估计方法;在此基础上,讨论跟踪过程中的模拟退火处理以及粒子聚类分析;最后,将跟踪模型应用在数字地图的特征提取中。实验表明,与传统的数字栅格地图道路提取算法以及基于其他粒子滤波的算法相比较,基于跟踪模型的算法具有较强的鲁棒性以及精度,同时能够很好地处理扫描栅格地图中缺失的道路信息提取。