西藏改则县多不扎地区上侏罗统对望山组的建立及意义

对望山组是发育在羌南板块南缘的一套岩石组合,以安山岩、流纹岩、玄武质凝灰岩为主,有少量的玄武安山岩夹层,具有明显的岩浆喷出相和沉积相韵律分布的特点。利用LA-ICP-MS同位素定年技术对对望山组安山岩中的锆石进行了U-Pb同位素测年,获得锆石的~(206)Pb/~(238)U年龄加权平均值为150.5±0.6Ma,表明对望山组的形成时代为晚侏罗世中晚期,在详细剖面测制和区域对比的基础上建立了对望山组。对望山组的建立对完善班公湖-怒江缝合带的地层系统、探讨班公湖-怒江洋的晚侏罗世构造演化具有重要的地质意义。     

Effects of size and strain rate on the mechanical behaviors of rock specimens under uniaxial compression

Size and strain rate are two key factors that dramatically influence the estimation of rock mechanical behaviors. To better understand the effects of size and strain rate on measured rocks, rock specimens with six different sizes were tested at six different strain rates under uniaxial compression using the MTS 815 Rock Mechanics Test System. Having determined that the size and strain rate significantly affect the peak strain, peak stress, elastic modulus, acoustic emission (AE), and failure pattern of the rock specimens, the relation was established between the strength and the size and strain rate of red sandstone. And the variation was revealed among the size and strain rate, the AE, and the failure pattern. It turned out that the peak stress was negatively correlated with the rock size and was positively correlated with the strain rate. When the length to diameter ratio (L/D) of the rock specimen was less than 2.0, the AE appeared mildly. The AE quantities gradually increased before the peak stress, and then sharply decreased after the peak stress. The failure pattern of the rock specimen was relatively complicated, with a fracture plane appearing along the axial direction. Conical failure type was also presented. When the L/D ratio of the specimen was greater than 2.0, the AE characteristics of red sandstone showed the radical model. There were relatively few AE rings before the peak stress. But the AE rings increased suddenly and dramatically during the peak stress. The rock specimens primarily failed with a single shear plane. Moreover, with an increase in the strain rate, the AE activities were enhanced and the AE quantities increased. When the strain rate of the rock specimen was less than 5.0?×?10^?4/s, the rock specimen failed with a shear or tensile-shear pattern. And when the strain rate was greater than 5.0?×?10^?4/s, the rock specimen tended to fail in a conical pattern.     

Mineralization time and tectonic setting of the Zhengguang Au deposit in the Duobaoshan ore field,Heilongjiang Province,NE China

The Zhengguang deposit, a representative large gold deposit in the Duobaoshan ore field in NE China, is located in the northeast of the Central Asian Orogenic Belt (CAOB). Ore body emplacement was structurally controlled and occurs mainly at the contact zone between the strata of Duobaoshan Formation and an Ordovician diorite stock. The diorite rocks have a close genetic relationship with Au mineralization. Re–Os isotope dating of Au-bearing pyrite yields an isochron age of 506 ± 44 Ma (MSWD = 15). Based on present and previous dating results, it can be concluded that the Zhengguang deposit formed at ~480 Ma. The mineralization time of the Zhengguang deposit is nearly identical to those of the Duobaoshan and Tongshan deposits, indicating they are all derived from the same metallogenic system. The Duobaoshan-style porphyry Cu–Mo mineralization may exist at deeper levels at Zhengguang. The geochemical characteristics of the Zhengguang dioritic rocks presented in this paper are similar to those of bajaitic high-Mg andesite, and the magmas originated from a mantle wedge metasomatized by melts from a subducting oceanic slab at an active continental margin setting. The Ordovician magmatic–metallogenic events in the Duobaoshan ore field were caused by the westward subduction of an oceanic slab located between the Xing’an and Songliao blocks. It is worth pointing out that the Zhengguang deposit is the oldest known Phanerozoic Au deposit in NE China. Further studies of this deposit will improve understanding of the regularity of ore formation and aid mineralization forecast across the Duobaoshan region.     

等距离正圆柱投影世界挂图上大圆航线的绘制

针对世界挂图上全球任意两点间大圆航线绘制存在的问题,通过总结当前几种常用于大圆航线绘制的世界挂图投影存在的不足,提出采用等距离正圆柱投影作为世界挂图投影并分析其适用性。从大圆航线在等距离正圆柱投影中的方程及其曲率入手,按照计算机制图中"以直代曲"的研究思路,给出了一种在等距离正圆柱投影世界挂图上绘制大圆航线的方法,最后以我国南极科考航线所需参考的大圆航线绘制实例验证了该方法的可行性与实用性。     

便携式高频地波雷达海流探测长周期工作性能试验

2013年1月29日至3月15日在台湾海峡西南部海域进行了OSMAR-S100便携式高频地波雷达与浮标观测海流数据的长周期对比试验,验证了雷达系统在探测海流方面的准确性、可靠性和稳定性.通过实测海流与雷达矢量流的复相关分析,选定3 m层的海流为对比代表层.试验期间实测流速为0.0~120.0 cm/s,雷达海流有效探测区内的矢量流流速、流向的观测误差较小,能够满足实时监测海洋表层流的需要,高精度区流速、流向的均方根误差分别为9.1 cm/s和24.8°,边缘区的均方根误差为13.3~24.8 cm/s和39.4°~39.6°,与国内外达到业务化运行要求的同类产品实际观测精度相当.     

New Zircon U‐Pb Age of Granodiorite in Chifeng at the Northern Margin of North China Craton and Constraints on Plate Tectonic Evolution

正Objective The North China Craton(NCC)is one of the oldest cratons in the world.The accretionary belt at its northern margin has been the focus of scholars both at home and abroad(Zhu Junbing and Ren Jishun,2017).In recent years,a series of Late Paleozoic–Mesozoic intrusions trending E–W have been discovered within the northern margin of the NCC,forming a magmatic belt.The study     

Isotope Geochronologic and Geochemical Constraints on the Magmatic Associations of the Collisional Orogenic Zone in the West Kunlun Orogen,China

The Jiajiwaxi pluton in the southern portion of the West Kunlun Range can be divided into two collision–related intrusive rock series, i.e., a gabbro–quartz diorite–granodiorite series that formed at 224±2.0 Ma and a monzonitic granite–syenogranite series that formed at 222±2.0 Ma. The systematic analysis of zircon U-Pb geochronology and bulk geochemistry is used to discuss the magmatic origin(material source and thermal source), tectonic setting, genesis and geotectonic implications of these rocks. The results of this analysis indicate that the parent magma of the first series, representing a transition from I-type to S-type granites, formed from thermally triggered partial melting of deep crustal components in an early island–arc–type igneous complex, similar to an I-type granite, during the continental collision orogenic stage. The parent magma of the second series, corresponding to an S-type granite, formed from the partial melting of forearc accretionary wedge sediments in a subduction zone in the late Palaeozoic–Triassic. During continued collision, the second series magma was emplaced into the first series pluton along a central fault zone in the original island arc region, forming an immiscible puncture-type complex. The deep tectonothermal events associated with the continent–continent collision during the orogenic cycle are constrained by the compositions and origins of the two series. The new information provided by this paper will aid in future research into the dynamic mechanisms affecting magmatic evolution in the West Kunlun orogenic belt.     

钻井利器的故事之“铝合金钻杆”

地球科学的发展对地球深部数据的依赖程度越来越高,作为“入地”重要手段的科学超深井工程是研究深部地质学的重要方法,被誉为是“伸入地壳的望远镜”。与钢钻杆相比,铝合金钻杆以其独特的优越性(质量轻、比强度高、钻进深度深、所需能耗少),已成为难进入地区、大位移井、超深井等钻柱设计的优选方案。本文从科普的角度介绍了钻柱与钻杆的区别、钻柱的使用极限长度、铝合金钻杆的技术优势及其现存的不足之处,以此提高对铝合金钻杆的认识,促进铝合金钻杆的研究和发展。