GLACIAL VARVE THICKNESS AND 127 YEARS OF INSTRUMENTAL CLIMATE DATA: A COMPARISON

Annually laminated sediments (glacial varves) from Lake Silvaplauna, a High Alpine proglacial lake in the Central Swiss Alps, were compared with glacier monitoring data and instrumental climate data from 1864 to 1990. Long-term and short-term responses to climatic change as well as anthropogenic influence can be traced separately in the varve succession. Economic development in the lake catchment has resulted in higher autochthonous production in recent years. Autochthonous components contribute around 10% to the total amount of sediment accumulated annually since 1960 but their contribution is negligible before this date. Decadal-scale varve thickness trends correlate with glacier size-variations. A stepwise, running multiple regression analysis demonstrates that interannual changes in varve thickness are strongly correlated with changes in mean summer temperatures, but cannot be sufficiently explained without considering summer precipitation and the number of days with snow per year. The wide range of observed correlation coefficients reveals the sensitivity of the archive to temporal variability of the climatic forcing factors and makes the development of transfer functions ambiguous.     

Availability of suitable land-fast ice and predation as factors limiting ringed seal populations, Phoca hispida, in Svalbard

We examined the stability of fast ice areas in western and northern Spitsbergen, the area north of Nordaustlandet, the bays and sounds of Hinlopen Stretet and the large area in the northern part of Storfjorden. NOAA satellite imagery from 1974 and 1988 and NOAA (AVHRR) imagery from 1980-87 were used to determine the dates of freeze-up and break-up. The number of days of fast ice present before the nominal birth date of ringed seal pups were computed for all major bays and fjords. Ice thickness was then computed from these data. Known prime breeding habitat in Svalbard is found in areas near glacier fronts in protected fjords and bays, where densities of birth lairs are 5.46 km⁻², corresponding to a ringed seal female density of 2.6 km⁻². Most of the ringed seal breeding habitat in Svalbard, however, consists of flat fjord ice where snow accumulation is rarely deep enough to permit birth lair construction. In these areas pups are often born in the open. Based on breathing hole densities, the density of adult females in the flat ice areas in the breeding period was estimated to 0.98 km⁻². A preliminary estimate is that approximately 19,500 pups could be born annually in the fast ice of Svalbard. Annual recruitment could be quite variable given the unpredictable nature of the fast ice areas and the high predation mortality on newborn pups. Discrepancies between our calculated ringed seal production and numbers of seals required to feed the large polar bear population in the area signal cause for management concern.     

The ringed seal (Phoca hispida) spring diet in northwestern Spitsbergen, Svalbard

A total of 284 ringed seals (Phoca hispida) were sampled to determine their diet in the spring of 1981 and 1982. Few seals contained identifiable stomach contents. No significant age-or sex-related differences in choice of prey were found. It seems that in spring northwestern Spitsbergen ringed seals prey upon arctic cod (Boreogadus saida) , decapods and larger amphipods.? Diet, ringed seal, Svalbard .     

Studies of the ringed seal (Phoca hispida Schreber 1775) in its breeding habitat in Kongsfjorden, Svalbard

This study was conducted in Kongsfjorden, Svalbard, from mid-March through April 1984. Local Greenland sled dogs were used to locate subnivean ringed seal lairs. A total of 90 lairs were found and excavated. These constituted 28 lairs classified as birth lairs, 22 as tiggak (rutting male) lairs, and 40 which could not be classified. The first birth lair was found on 24 March. There was significantly more snow covering birth lairs than tiggak lairs, and birth lairs were also shown to be significantly larger than tiggak lairs. The positions of the lairs were plotted on a map, and distances between neighbouring seal lairs were used as an indicator of territorial size. Arctic foxes had attacked 19 lairs and 6 of these had resulted in a kill (32%). Polar bears had attacked 13 lairs with one kill (8%).     

Anatomy of a subaqueous ice-contact fan and delta complex, Middle Pleistocene, North-west Germany

This paper presents a detailed analysis of the high‐resolution facies architecture of the Middle Pleistocene Porta subaqueous ice‐contact fan and delta complex, deposited on the northern margin of glacial Lake Weser (North‐west Germany). A total of 10 sand and gravel pits and more than 100 wells were examined to document the complex facies architecture. The field study was supplemented with a ground‐penetrating radar survey and a shear‐wave seismic survey. All collected sedimentological and geophysical data were integrated into a high‐resolution three‐dimensional geological model for reconstructing the spatial distribution of facies associations. The Porta subaqueous fan and delta complex consist of three fan bodies deposited on a flat lake‐bottom surface at the margin of a retreating ice lobe. The northernmost fan complex is up to 55 m thick, 6·2 km wide and 6·5 km long. The incipient fan deposition is characterized by high‐energy flows of a plane‐wall jet. Very coarse‐grained, highly scoured jet‐efflux deposits with an elongate plan shape indicate a high Froude number, probably >5. These jet‐efflux sediments are deposited in front of a large ～3·2 km long, up to 1·2 km wide, and up to 25 m deep flute‐like scour, indicating the most proximal erosion and bypass area of the jet that widens and deepens with distance downstream to the region of maximum turbulence (approximately five times the conduit diameter). Evidence for subsequent flow splitting is given by the presence of two marginal gravel fan lobes, deposited in front of 1·3 to 2·5 km long flute‐like scours, that are 0·8 to 1 km wide and 7 to 20 m deep. In response to continued aggradation, small jets developed at the periphery of these bar‐like deposits and filled in the low areas adjacent to the original superelevated regions, locally raising the depositional surface and characterized by large‐scale trough cross‐stratified sand and pebbly sand. The incision of an up to 1·2 km wide and up to 35 m deep channel into the evolving fan is attributed to a catastrophic drainage event, probably related to a lake outburst and lake‐level fall in the range of 40 to 60 m. At the mouth of this channel, highly scoured jet‐efflux deposits formed under hydraulic‐jump conditions during flow expansion. Subsequently, Gilbert‐type deltas formed on the truncated fan margin, recording a second lake‐level drop in the range of 30 to 40 m. These catastrophic lake‐level falls were probably caused by rapid ice‐lobe retreat controlled by the convex‐up bottom topography of the ice valley.     

Late Pleistocene and Holocene cool‐water carbonates of the Western Mediterranean Sea

Post‐glacial, neritic cool‐water carbonates of the Western Mediterranean Sea were examined by means of hydroacoustic data, sediment surface sampling and vibrocoring to unravel geometries and to reconstruct sedimentary evolution in response to the last sea‐level rise. The analysed areas, located on the Alboran Ridge, in the Bay of Oran, and at the southern shelf of the island of Mallorca, are microtidal and bathed by oligotrophic to weakly mesotrophic waters. Seasonal water temperature varies between 13 °C and 27 °C. Echosounder profiles show that the Bay of Oran and the southern shelf of Mallorca are distally steepened ramps, while the Alboran Ridge forms a steep‐flanked rugged plateau around the Alboran Island. In the three areas, an up to 10 m thick post‐glacial sediment cover overlies an unconformity. In Oran and Mallorca, stacked lowstand wedges occur in water depths of 120 to 130 m. On the Alboran Ridge and in the Bay of Oran, highstand wedges occur at 35 to 40 m. Up to 5 m long cores of upper Pleistocene to Holocene successions were recovered in water depths between 40 and 81 m. Deposits contain more than 80% carbonate, with mixed carbonate‐volcaniclastics in the lower part of some cores in Alboran. The carbonates consist of up to 53% of aragonite and up to 83% of high magnesium calcite. Radiocarbon dating of bivalve shells, coralline algae and serpulid tubes indicates that deposits are as old as 12 400 cal yr bp . The carbonate factories in the three areas are dominated mostly by red algae, but some intervals in the cores are richer in bivalves. A facies rich in the gastropod Turritella, reflecting elevated surface productivity, is restricted to the Mallorca Shelf. Rhodoliths occur at the sediment surface in most areas at water depths shallower than 70 m; they form a 10 to 20 cm thick veneer overlying rhodolith‐poor bioclastic sediments which, nonetheless, contain abundant red algal debris. This rhodolith layer has been developing for the past 800 to 1000 years. Similar layers at different positions in the cores are interpreted as reflecting in situ growth of rhodoliths at times of reduced net sedimentation. Sedimentary successions in the cores record the post‐glacial sea‐level rise and the degree of sediment exposure to bottom currents. Deepening‐upward trends in the successions are either reflected by shallow to deep facies transitions or by a corresponding change of depth‐indicative red algae. There are only weak downcore variations of carbonate mineralogy, which indicate that no dissolution or high magnesium to low magnesium calcite neomorphism occurs in the shallow subsurface. These new data support the approach of using the Recent facies distribution for interpretation of past cool‐water, low‐energy, microtidal carbonate depositional systems. Hydroacoustic data show that previous Pleistocene transgressive and highstand inner ramp deposits and wedges were removed during sea‐level lowstands and accumulated downslope as stacked lowstand wedges; this suggests that, under conditions of high‐amplitude sea‐level fluctuations, the stratigraphic record of similar cool‐water carbonates may be biased.     

DORIS-DIODE: Jason-1 has a Navigator on Board

DIODE (Doris Immediate On-board orbit DEtermination) is a series of real-time orbit determination software, which process one-way up-link Doppler measurements performed by a DORIS receiver on a satellite. The DIODE software are embedded within the DORIS receivers, and they provide orbit and time determination to the user as well as technical parameters to adjust the tracking loop within the instrument. After a first successful flight on-board SPOT4, the second generation of the family operates on-board Jason-1, with more efficient and more accurate algorithms. Similar versions have been embarked onboard SPOT5 and ENVISAT. The accuracy is between 10 and 30 centimeters RMS for the radial component, and about 50 centimeters RMS in 3D. With several Failure Detection and Incident Recovery (FDIR) enhancements implemented in the software, DIODE/Jason-1 has experienced only one anomaly in July 2004; its availability is 99.7%, after two years and a half in-orbit. This article describes the DORIS/DIODE element of the Jason-1 system. It summarizes the main results obtained from the various verification activities that concerned all parts of this navigation and time-tagging Jason-1 subsystem.     

Polar bear predation on ringed seals in the fast-ice of Hornsund, Svalbard

Polar bear hunting success on ringed seals in subnivean lairs and basking on the fast ice, was studied in Hornsund, Svalbard. A few bears were observed while actually hunting, but in most cases bear tracks were followed by snowmobile to determine the outcome of hunts. Seal carcasses were classified from size and tooth annuli as pups, juveniles or adults. A total of 62 subnivean structures were entered by bears, with six seals killed. One of ten charges on basking seals resulted in a kill. Success rates of bears in Hornsund arc compared with results of studies in Canada and Svalbard. OHunting success, polar bear, predation, ringed seal