基于可移动角点的航空和地面LiDAR数据配准

针对航空和地面LiDAR数据配准中点云数据的共轭特征较少且精度差异较大的问题,提出了一种基于可移动角点的航空和地面LiDAR数据配准方法:从航空和地面LiDAR数据中分别提取相应的建筑物角点,采用6参数模型对角点进行初始配准;以地面角点为参照,利用迭代移动方法对误差较大的航空角点进行修正;最后根据移动后的航空和地面角点计算获得点云配准关系。实验结果表明,该文方法可取得较好的点云配准效果,角点修正后能有效提升点云配准精度,适合于含有角点特征的航空和地面LiDAR数据配准。     

The Exhumation History of North Qaidam Thrust Belt Constrained by Apatite Fission Track Thermochronology: Implication for the Evolution of the Tibetan Plateau

Determining the spatio-temporal distribution of the deformation tied to the India-Eurasian convergence and the impact of pre-existing weaknesses on the Cenozoic crustal deformation is significant for understanding how the convergence between India and Eurasia contributed to the development of the Tibetan Plateau. The exhumation history of the northeastern Tibetan Plateau was addressed in this research using a new apatite fission track (AFT) study in the North Qaidam thrust belt (NQTB). Three granite samples collected from the Qaidam Shan pluton in the north tied to the Qaidam Shan thrust, with AFT ages clustering in the Eocene to Miocene. The other thirteen samples obtained from the Luliang Shan and Yuka plutons in the south related to the Luliang Shan thrust and they have showed predominantly the Cretaceous AFT ages. Related thermal history modeling based on grain ages and track lengths indicates rapid cooling events during the Eocene-early Oligocene and since late Miocene within the Qaidam Shan, in contrast to those in the Cretaceous and since the Oligocene-Miocene in the Luliang Shan and Yuka region. The results, combined with published the Cretaceous thermochronological ages in the Qaidam Shan region, suggest that the NQTB had undergo rapid exhumation during the accretions along the southern Asian Andean-type margin prior to the India-Eurasian collision. The Cenozoic deformation initially took place in the North Qaidam thrust belt by the Eocene, which is consistent with the recent claim that the deformation of the northeastern Tibetan Plateau initiated in the Eocene as a response to continental collision between India and Eurasia. The immediate deformation responding to the collision is tentatively attributed to the pre-existing weaknesses of the lithosphere, and therefore the deformation of the northeastern Tibetan Plateau should be regarded as a boundary-condition-dependent process.     

Laboratory Simulation of the Formation Process of Surface Geochemical Anomalies Applied to Hydrocarbon Exploration

The formation mechanisms and processes of geochemical anomalies used as proxies in surface geochemistry exploration (SGE) have not been well understood. Previous studies cannot realize 3D measurement of microseeping hydrocarbons from reservoirs to the surface, which made it difficult to understand the features and pathways of deep hydrocarbon microseepages. Understanding the processes of hydrocarbon microseepages will contribute to the acceptance and effectiveness of surface geochemistry. Based on a simplified geological model of hydrocarbon microseepages, including hydrocarbon reservoir, direct caprock, overlying strata and Quaternary sediments, this work established a 3D experimental system to simulate the mechanisms and processes of deep hydrocarbon microseepes extending to the surface. The dispersive halos of microseeping hydrocarbons in the subsurface were adequately described by using this 3D experimental system. Results indicate that different migration patterns of hydrocarbons above the point gas source within the simulated caprock and overlying strata can be reflected by the ratio of i-butane to n-butane (i-C4/n-C4), which follow diffusion and infiltration (buoyancy) mechanisms. This is not the case for vertical measurement lines far from the point gas source. A vertical gas flow in the form of a plume was found during hydrocarbon microseepage. For sampling methods, the high-density grid sampling is favorable for delineating prospecting targets. Hydrocarbon infiltration or buoyancy flow occurs in the zones of infiltration clusters, coupling with a diffusion mechanism at the top of the water table and forming surface geochemical anomalies. These results are significant in understanding hydrocarbon microseepage and interpreting SGE data.     

伊通盆地鹿乡断陷C区块含油饱和度与含油性分析

综合研究伊通盆地鹿乡断陷双二段储层的岩性、含油性和含油饱和度,确定了适用于本区的含油饱和度计算方法,并与实际含油性进行了对比,分析了沉积和构造对含油性的影响。研究区双二段含油储层的岩性以粉砂岩、细砂岩和砂砾岩为主,含油级别为荧光级以上。根据阿尔奇公式计算出的含油饱和度大部分与实际的含油性相符合,并将含油饱和度70%、50%和38%值作为本区气层、油层、油水层和水层的区分标准。本区储层的含油性受到沉积和构造两方面的控制,沉积作用主要控制储层的岩石结构和物性,构造控制油气的聚集,即在构造高部位,实际含油饱和度比计算结果要高,而在构造低部位,实际含油饱和度比计算结果要低。     

扬子西缘乡城-丽江结合带燕山期斑岩Mo多金属矿床成矿系统

位于扬子陆块西缘与西南三江造山带结合部位的乡城-丽江地区,北起四川乡城经云南格咱南至丽江地区,在印支期斑岩铜矿带上新发现叠加了燕山期斑岩Mo多金属成矿作用,形成乡城-丽江斑岩Mo矿带。受印支期古特提斯洋盆闭合后地壳缩短与加厚的影响,燕山晚期下地壳发生拆沉作用,导致后碰撞型花岗质岩浆侵位,发育了Mo多金属成矿作用,并构成斑岩成矿系统。岩石地球化学特征表明,燕山晚期含矿斑岩具高硅(SiO_2=66.29%~79.36%)、高碱(K_2O+Na_2O=5.07%~9.24%)、富钾(K_2O/Na_2O=0.71~2.13)的特点,属于高钾钙碱性岩石系列。岩石富集轻稀土元素(LREE),具有负δEu异常;微量元素具富集大离子亲石元素K、U、Th、Rb,亏损高场强元素Nb、Ta、P、Ti的特征;大离子亲石元素的富集和Nb、Ta等高场强元素的亏损,表明形成这些岩体的岩浆主要来自地壳,具有造山带花岗岩的地球化学特征。区内代表性含矿斑岩相似的地球化学组成及分布特征表明,乡城-丽江结合带燕山晚期的成矿斑岩是由同源岩浆分异演化而来。成矿系统的分析表明,燕山晚期主要含矿斑岩成矿物质以壳源为主,但具有少量地幔物质的加入,成岩成矿物质来源具有相似或一致的源区特征。在成矿元素的组合上,由成矿斑岩体向外带表现出W、Mo→W、Mo、Cu→Pb、Zn、Ag的演化趋势。研究表明,本区燕山晚期花岗岩浆的侵入及Mo多金属成矿作用并不是独立或个别的成矿事件,而是纵跨义敦岛弧、甘孜-理塘结合带及扬子西缘的带状成矿活动,属于区内与燕山晚期岩浆侵入作用相关的统一斑岩成矿系统。     

云南会泽大黑山铝土矿地球化学特征及其物源分析

大黑山铝土矿赋存于上二叠统宣威组底部,下伏地层为峨眉山玄武岩。矿石结构主要以泥晶结构为主,具有少量鲕状、粒屑结构。矿石构造以致密块状构造为主,局部呈层状、似层状。铝土矿石中Al2O3与Fe2O3、Si O2呈现较好的负相关关系,Ti O2与Zr、Hf、Nb、Ta相关性较好,Zr-Hf、Nb-Ta的相关性拟合度很高。铝土矿与峨眉山玄武岩样品具有相似的稀土元素配分模式。综合稳定元素相关性、微量元素及稀土元素标准化图解、lg Ni和lg Cr二元图解等分析方法对大黑山铝土矿的成矿物质来源进行探讨,研究结果表明铝土矿的成矿物质来源主要来自峨眉山玄武岩。     

新疆春风油田石炭系火山岩岩性特征及测井识别方法

不同岩性的火山岩其储集性能差异甚远,准确识别火山岩岩性对于火山岩储层的研究具有重要意义。研究区春风油田石炭系储层以火山岩为主,过渡类型较多,岩性较为复杂。利用岩心观察、薄片鉴定、地化分析等方法确定研究区发育火山熔岩类和火山碎屑岩类两类火山岩,其中,火山熔岩包括玄武岩、安山玄武岩、玄武安山岩以及安山岩,火山碎屑岩有凝灰岩和火山角砾岩等。通过识别出的岩性标定测井,分析每种岩性的测井响应特征,利用交会图法和星形图法,建立了不同岩性的识别标准。     

中国北方沿海典型澙湖—山东月湖水深遥感反演

澙湖是中国北方重要的滨海生态系统之一,水深较浅、透明度较低、底质类型复杂、人类干扰频繁等特点导致澙湖水深资料长期缺乏或存在较大误差,极大地制约了澙湖生态系统的研究和保护。本研究在现场实测水深的基础上,使用IKONOS高分辨率卫星影像,将山东荣成月湖水域划分为浅水区、植被区和深水区三类分别进行水深反演。研究表明红光波段(Band3)对水深的敏感性最高,分区建立线性回归模型反演水深的精度高于不分区的精度,多波段组合模型的反演精度最高,植被对水深反演的精度影响较大。反演结果表明,月湖水深最深处达271.23cm,水深反演的平均相对误差为13.16%。     

围填海对海洋水动力与生态环境的影响

近10年来,中国海岸带围填海活动呈现出规模大、速度快的发展态势。围填海能带来显著的经济效益,但对海洋环境与生态的负面影响也不可忽视。针对围填海对海洋环境和生态的影响及作用机制,分别从水动力和生态系统两个方面进行了概述。围填海改变了海洋的自然几何属性(原始岸线、地形地貌、海湾面积),引起水动力环境的变化(潮汐系统和海湾水交换能力),进而影响了海湾的环境容量;围填海破坏了生物栖息地、导致生物多样性的丧失,影响到生态系统结构与功能的稳定性;水动力与生物多样性的变化可显著影响到生物地球化学过程,加速富营养化进程,恶化水质,增加生态灾害风险。目前,围填海后的生态修复策略主要有增加生物量、建设自然保护区、退陆还海3种方式;而生态补偿策略则多基于“生态系统服务功能与生境面积的大小为线性关系”,通过对其经济价值的量化后进行生态补偿与实施相关政策。国际上,生态系统服务功能的量化参数逐步纳入实际管理,并在线性关系研究的基础上,逐步纳入一些非线性的理念,使生态补偿机制更为合理化;而我国对于围填海生态效应的定量化研究及科学理论在管理政策中的实际应用仍亟待提高。整体而言,全面、准确地评估围填海对海洋环境与生态的影响离不开自然科学与社会科学的交叉与融合。     

华南水东湾波控、中等潮差岬湾海滩地形动力分类

海滩地形动力分类在国外的海岸地貌研究中已经被广泛接受。本文使用了华南粤西水东湾切线带、过渡带和遮蔽带海滩连续16个月32次大潮期间同步获取的波浪、潮汐、泥沙和海滩地形数据,分别按照无量纲沉降参数、相对潮差参数和无量纲海湾尺度参数对这一岬湾海滩不同岸段的海滩类型进行了研究,研究发现：（1）水东湾切线带海滩的主要状态为有裂流的低潮台地状态和沙坝型海滩状态,过渡带海滩主要状态是低潮沙坝/裂流海滩和沙坝消散型状态,遮蔽带海滩主要状态是有或无沙坝的消散型状态;（2）海湾不同岸段海滩状态的顺序变化与差异体现了岬湾海滩状态的时空变化性,与现场观测的海滩地形的变化基本一致,说明了对波控中到强潮海滩进行研究时,需要考虑潮汐的影响。同时,本文主要给出了海滩状态研究的一个框架体系,由于海滩不同的状态伴随不同的侵蚀模式,要求我国今后需加强在这一方面研究,以进一步丰富我国海滩地形演变、海滩地形动力过程和海滩防侵蚀的理论基础。